Assembly Instructions
Important Information
Caution: You must read this before you proceed.
Please look in the leg for hardware packs.
Product: Table
Caution: This Table is NOT a TOY.
Keep your child/children at bay during the assembly process.
Whenever moving/lifting the Table and to prevent damage to the Table, two adults are needed to execute these actions.
Diagram Description: A diagram of a round table with a slatted top and three curved legs.
Parts List
| Label | Picture Description | Description | QTY |
|---|---|---|---|
| A | A circular table top with a slatted surface. | Table Top | 1 |
| B | A curved leg piece. | First Leg | 1 |
| C | A curved leg piece with a specific attachment point. | Second Leg | 1 |
| D | A curved leg piece with a different attachment point and a hole. | Third Leg | 1 |
Hardware
| Label | Picture Description | Description | QTY |
|---|---|---|---|
| 1 | A bolt with a hexagonal head and coarse threads, labeled M8x50mm. | Bolt (M8x50mm) | 5 |
| 2 | A longer bolt with a hexagonal head and coarse threads, labeled M6x110mm. | Bolt (M6x110mm) | 2 |
| 3 | A screw with a hexagonal head and fine threads, labeled M6x25mm. | Screw (M6x25mm) | 3 |
| 4 | A cylindrical sleeve nut. | Sleeve Nut | 2 |
| 5 | An L-shaped hexagonal wrench (Allen key). | Allen Key | 2 |
Assembly Preparation
Before Beginning Assembly:
- Read instructions, cover to cover.
- Have 2 adults on hand for assembly.
- Do not assemble on flooring or carpet.
- Assemble on a clean non-marring surface (packing foam).
- Save all packaging until finished.
Diagram Description: An illustration showing the table top and leg components laid out, along with the hardware (bolts, screws, sleeve nuts, Allen key) ready for assembly.
Assembly Steps
Step 1
Unpack and place all parts on a clean, non-marring surface.
Step 2
2.1) Insert Second Leg (C) and Third Leg (D) through the First Leg (B) as shown above. 2.2) Attach Second Leg (C) to Third Leg (D) using Screws (3) with Allen Key (5). Do not fully tighten the Screws.
Diagram Description: Diagram 2.1 shows the Second Leg (C) and Third Leg (D) being inserted through the First Leg (B). Diagram 2.2 shows Screws (3) and Allen Key (5) being used to attach Leg (C) to Leg (D).
Step 3
Then, attach First Leg (B) to Second Leg (C) and Third Leg (D) using Bolt (2) and Sleeve Nut (4) with Allen Keys (5). Do not fully tighten the Bolt.
Diagram Description: Diagram shows the leg assembly being attached to the table top. Bolt (2) and Sleeve Nut (4) are used with Allen Keys (5) to connect the First Leg (B) to the Second Leg (C) and Third Leg (D).
Step 4
Attach Leg Frame to the Table Top (A) using Bolts (1) with Allen Key (5). Do not fully tighten the Bolts.
Diagram Description: Diagram shows the assembled leg frame being attached to the underside of the Table Top (A) using Bolts (1) and Allen Key (5).
Step 5
Stand the Table up, with assistance from your partner. EXERT pressure, floorwards, onto the Table. This pressure will help the Legs and Table Top reach alignment at all joints. Check for wobbles on a level surface. If no wobbles are found, in a sequential manner, gradually tighten all Bolts and Screws until evenly secured. When tightening the Bolts and Screws, tighten sequentially. Do not tighten any Bolt or Screw fully and then move on towards the next one. This could cause the frame to warp. If there are still wobbles, loosen the Bolts and Screws and execute the same process. If the Table is not Stable, it could lead to damage to the product.
Diagram Description: Diagram shows the table being stood upright, with assistance, and pressure being applied downwards to align the joints.
Step 6
Your Table is ready for use.
This Table can only be used on a flat, level surface.
Diagram Description: Diagram of the fully assembled table.
Care & Maintenance
- ❌ ? Do not put hot items directly on furniture surface.
- ❌ ? Do not clean furniture with harsh cleansers or polish.
- ☀️ To obtain the longest lifespan of your outdoor products, minimizing exposure to direct sunlight is recommended.
- ❌ ? Children should not climb or jump on the furniture.
- ✍️ Do not write on furniture without a padded barrier to protect the surface.
- ?️ ❄️ ☀️ To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover the product and/or place under patio or awnings.
- ❌ ? Not for commercial use.
- ✅ ? For residential use only.
- ? ? Stains may be removed with mild soap solution and damp cloth.
- ? Dust and pick-up spills using a clean, non-colored, lint-free cloth.
