TABLE
CAUTION: This table is NOT a TOY. Keep your child / children at bay during the assembly process.
Parts list
| Label | Description | QTY |
|---|---|---|
| A | Table Top | 1 |
| B | Table Leg with Pre-attached Levellers | 4 |
| C | Central Support Ring | 1 |
Hardware
| Label | Description | QTY |
|---|---|---|
| 1 | Washer(8mm) | 13 |
| 2 | Spring Washer(8mm) | 13 |
| 3 | Hex Bolt(M8*30mm) | 9 |
| 4 | Hex Bolt(M8*25mm) | 5 |
| 5 | Spanner | 1 |
Assembly Preparation
Before Beginning Assembly:
- ? Read instructions, cover to cover.
- ??? Have 2 adults on hand for assembly.
- ??️ Do not assemble on flooring or carpet.
- ✅? Assemble on a clean non-marring surface (packing foam).
- ? Save all packaging until finished.
Assembly Steps
Overview
The table consists of a Table Top (A), four Table Legs (B) with pre-attached levellers, and a Central Support Ring (C). The assembly requires approximately 30 minutes. The diagram shows the general layout of the parts for perspective. Ensure the front of the table is oriented correctly during assembly.
Step 1: Preparation
Unpack and place all parts on a clean soft surface.
Step 2: Attach First Leg
Loosely attach the Central Support Ring (C) to one of the Table Legs (B) using one Washer (1), one Spring Washer (2), and one Hex Bolt (3), tightened with the Spanner (5). At this stage, only loosely tighten the bolts.
Step 3: Attach Remaining Legs
Repeat Step 2, attaching the remaining three Table Legs (B) to the Central Support Ring (C). At this stage, only loosely tighten the bolts.
Step 4: Attach Table Top
Lay the Table Top (A), top facedown, onto a flat, soft, clean surface. Attach the Table Legs (B) assembly to the underside of the Table Top (A) using Washers (1), Spring Washers (2), and Hex Bolts (3 or 4, depending on length needed) with the Spanner (5). At this stage, only loosely tighten the bolts.
Step 5: Final Tightening and Levelling
Stand the table rightside up. In a sequential manner, proceed to tighten up all screws. Adjust the Legs' pre-installed Levellers until the Table is level with the ground. Your table is now ready for use.
Caution: This Table can only be used on a flat, level surface.
Care & Maintenance
- ?? Do not put hot items directly on the furniture surface.
- ?? Do not clean furniture with harsh cleansers or polish.
- ☀️ To obtain the longest lifespan of your outdoor products, minimizing exposure to direct sunlight is recommended.
- ?? Children should not climb or jump on the furniture.
- ✍️? Do not write on furniture without a padded barrier to protect the surface.
- ?️❄️☀️ To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine. Whenever possible, cover the product and/or place it under a patio or awnings.
- ?? Not for commercial use. For residential use only.
- ?? Stains may be removed with mild soap solution and a damp cloth.
- ? Dust and pick-up spills using a clean, non-colored, lint-free cloth.
