ASSEMBLY INSTRUCTION
TV5610-45
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Identify and count all parts compare with the hardware list below.
Part List
| Item | Description | QTY |
|---|---|---|
| A | Top Panel (A circular panel with a slatted surface) | 1 |
| B | Bottom Panel (A circular panel with a slatted surface and attachment points) | 1 |
| C | Leg (A curved, U-shaped leg with holes for attachment) | 4 |
Hardware List
| Item | Description | QTY |
|---|---|---|
| D | Ø1/4"x38mm Bolt (A bolt with a threaded shaft and hexagonal head) | 16 |
| E | 1/4" Lock washer (A split ring washer) | 16 |
| F | 1/4" Flat washer (A flat, circular washer) | 16 |
| G | Allen Key (An L-shaped hexagonal wrench) | 1 |
Assembly Steps
Step 1
Attach the four legs (C) to the Bottom Panel (B). Use Ø1/4"x38mm Bolts (D), 1/4" Flat Washers (F), and 1/4" Lock Washers (E) for each leg. The order of assembly for each leg is: Bolt, Flat Washer, Leg, Lock Washer, Bottom Panel. Do not fully tighten yet (50%).
[Diagram: Shows four legs being attached to the bottom panel with hardware. Inset shows bolt, flat washer, leg, lock washer, panel assembly order.]
Step 2
Attach the Top Panel (A) to the assembled base. Use Ø1/4"x38mm Bolts (D), 1/4" Flat Washers (F), and 1/4" Lock Washers (E) for each attachment point. The order of assembly is: Bolt, Flat Washer, Leg, Lock Washer, Top Panel. Do not fully tighten yet (50%).
[Diagram: Shows the top panel being attached to the leg assembly with hardware. Inset shows bolt, flat washer, leg, lock washer, panel assembly order.]
Step 3
Fully tighten all bolts (100%).
[Diagram: Shows the assembled unit with text indicating to fully tighten all bolts.]
Step 4
Assembly Complete!
[Diagram: Shows the final assembled product.]
