7072-3BK Operations Manual

Product Overview & Placement

This document provides operations and installation instructions for the 4Modern Home 7072-3BK outdoor wall light. This fixture features an intelligent ☀️<0xF0><0x9F><0x8C><0x95> dusk-to-dawn sensor that automatically adjusts lighting based on ambient light levels.

Fixture Dimensions and Placement Guide

Diagram illustrating an outdoor wall light fixture. Dimensions provided include: 19.5" Tall Fixture, 80" Door, 80" Door x 0.75 = 60", and 60" height for each fixture. This diagram helps visualize recommended placement relative to door height and width.

Where to Place Your Outdoor Wall Lights

If you have one light next to your entryway or garage door, it should be placed approximately 1/3 of the door's height from the ground. If placing one light on each side of the door, position them at approximately 1/4 of the door's height. To determine this, measure the door's height from the floor to the top, then divide by 4 for two lights or 3 for one light. For example, for an 80" tall door, divide by 4 to find the ideal height of 20" for two lights. Lights should also be mounted about 66" from the floor or ground to illuminate the lock and handle effectively. Ensure lights are placed about 6" from the edge of the door. If using a single light, position it on the side of the door closest to the door handle.

Frequently Asked Questions (FAQ)

1. Does it feature a dusk-to-dawn sensor?

Yes, this fixture is equipped with an intelligent dusk-to-dawn sensor. It seamlessly transitions from off to on as nightfall approaches, automatically adjusting to ambient light levels below 20 LUX. In the morning, when brightness exceeds 90 LUX, it turns off, saving energy and eliminating the need for manual operation.

2. What could be the reason if the lamp does not turn on during installation?

If the lamp remains off during installation, it is likely due to the dusk-to-dawn sensor's natural deactivation during daylight hours. To test functionality, cover the sensor with your hand or a cloth after turning on the power switch. If the lamp illuminates, it confirms the lamp is working as intended and the issue relates to the sensor's automatic day/night cycle.

3. What if I do not need the dusk-to-dawn functionality?

This fixture includes a convenient rubber cap designed to disable the dusk-to-dawn feature. Simply slide the cap over the sensor when manual control is preferred.

4. What should I do if the glass lampshade I received is cracked or broken?

We understand that receiving a damaged product can be disappointing. If your glass lampshade is ? cracked or broken, or not in perfect condition, please contact us immediately. Our customer service team is dedicated to providing the best possible solution and ensuring your satisfaction.

Assembly & Installation Instructions

Dear Customer:

Thank you for choosing 4Modern Home! We appreciate your business. Should you have any questions or encounter any issues, please don't hesitate to contact us. You can reach us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction with your purchase. We value your feedback, as it helps future customers in making informed decisions. We encourage you to share your experience by leaving a brief product review on the platform where you made the purchase. Once again, thank you for choosing 4Modern Home!

Best regards!

[4Modern Home/Support Team]

Applicable Bulb Type

A60, T45, ST64

Warnings and Cautions

• ❗ Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
• ❗ Warning: California Residents Proposition 65. This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
• ⚠️ Caution: It is highly recommended to have an electrician install this light. Please ensure the electricity is turned off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s) and/or lamp(s).

Parts Included

Wire Connection Diagram

Diagram showing the electrical wire connections for the fixture. It labels terminals L (Line), N (Neutral), and indicates the grounding wire connection. Wires meeting safety standards are required to connect the electrical circuit. ? CAUTION: Risk of fire.

Installation Steps

Please read all instructions carefully. Before proceeding with installation, ensure the power supply is turned off and remains off until installation is completed.

1. Unscrew screw H from the lamp body and remove lamp holder J.
2. Remove screw G from the lamp body and remove hanging plate C.
3. Knock the expansion plug B into the wall.
4. Use screw E to lock the hanging board onto junction box A.
5. Lock screw F into the expansion plug.
6. Use terminal D to connect the fixture's wires (black, white, and ground) to the input wires. Connect the grounding wire and input wire separately.
7. Use screw G to lock the lamp body onto the hanging plate C.
8. Move the K knob of the light bulb onto the lamp body.
9. Use screw H to lock the lamp body J onto the lamp body.

Installation is complete.

Diagrams and Visual Aids

Drawing 1 (Caulking): Diagram illustrating the application of caulk. It shows a bead of caulk being applied to seal the gap between the fixture backplate and the wall, along the top and sides, to prevent water ingress. A caulking gun is depicted.

Assembly Diagram: Exploded view diagram of the 7072-3BK fixture assembly. It shows various components labeled A through K, including the junction box (A), expansion plugs (B), mounting bracket (C), wire caps (D), mounting screws (E, F, G, H), photoelectric switch (I), lamp body (J), and light bulb (K). Arrows indicate how parts connect during installation.