4Modern Home 7052-1BK Operations Manual
Product Model: 7052-1BK
Brand: 4Modern Home
Manufactured in: China
Product Features
This is an exterior wall light fixture from 4Modern Home, model 7052-1BK. It features an intelligent dusk-to-dawn sensor that automatically adjusts lighting based on ambient light levels, turning on below 20 LUX and off above 90 LUX, saving energy.
The fixture includes a rubber cap to disable the dusk-to-dawn functionality for manual control.
Applicable bulb types include A60, T45, and ST64.
Where to Place Your Outdoor Wall Lights
Diagram shows a house with a wall light mounted next to the front door. The fixture is 12.8 inches tall. For optimal illumination of the door lock and handle, lights should be placed approximately 66 inches from the floor or ground. If one light is used next to an entryway or garage door, it should be positioned at 1/3 the height of the door. For lights on each side of a door, they should be placed at 1/4 the height of the door. Lights should also be positioned 6 inches from the edge of the door. If only one light is used, it should be placed on the side of the door closest to the door handle.
Helpful Tip
The dusk-to-dawn sensor requires unobstructed placement. Ensure that eaves or other objects do not cover the sensor, as this may cause the light to remain on constantly.
Frequently Asked Questions
1. Does it feature a dusk-to-dawn sensor?
Yes, the fixture features an intelligent dusk-to-dawn sensor that automatically turns the light on below 20 LUX and off above 90 LUX.
2. What could be the reason if the lamp does not turn on during installation?
If the lamp does not turn on, it may be due to the dusk-to-dawn sensor deactivating during daylight hours. To test functionality, cover the sensor with your hand or a cloth after turning on the power switch. If the lamp illuminates, it is working correctly, and the issue is related to the sensor's automatic cycle.
3. What if I do not need the dusk-to-dawn functionality?
The fixture includes a rubber cap that can be used to disable the dusk-to-dawn feature, allowing for manual control.
4. What should I do if the glass lampshade I received is cracked or broken?
If the glass lampshade is damaged, please contact the customer service team immediately for assistance and a resolution.
Assembly & Installation Instructions
Thank you for choosing 4Modern Home. For any questions or issues, please contact support@4modernhome.com or call 469-312-6428. Customer feedback is valued.
Important Warnings
NEC Compliance: If using special control devices, follow instructions carefully to ensure full compliance with National Electrical Code (NEC) requirements. Consult a qualified electrician for any questions.
California Proposition 65: This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash hands after handling.
Caution
It is highly recommended to have an electrician install this light. Ensure electricity is turned off at the main circuit breaker before installation. Handle glass components with care as they are fragile.
Wiring Diagram
Wiring connection diagram showing wires meeting safety standards. CAUTION: Risk of fire. The diagram illustrates connections for Line (L), Neutral (N), and ground wires.
| Code | Part Description | QTY |
|---|---|---|
| A | Junction box | 0 |
| B | Mounting bracket | 1 |
| C | Mounting screws1 | 2 |
| D | Wire caps | 3 |
| E | Photoelectric switch | 1 |
| F | Lamp body | 1 |
| G | Mounting screws2 | 2 |
| H | ring | 1 |
| I | rubber mat | 1 |
| J | Light bulb | 0 |
Detailed Installation Steps
- Turn nut G from the lamp body and remove the hanging plate B.
- Secure the hanging plate B onto the junction box A using screw C.
- Attach the ring H and silica gel pad I to the lamp body.
- Connect the lamp body wires (black, white, ground) to the input line wires using the terminals (refer to diagram).
- Secure the lamp body onto the hanging board B using nut G.
- Install the bulb J into the lamp body.
- Installation is now complete.
Sealing Recommendation
After securing the fixture to the wall, it is recommended to seal the gap between the wall and the fixture backplate on the top and both sides using a high-quality waterproof caulk or silicone sealant (not included). This helps prevent moisture ingress.
