MAULsenja 825 88 LED Floor Lamp

Product Overview

The MAULsenja 825 88 is a versatile LED floor lamp designed for high-precision work in dry indoor environments such as homes, offices, or workshops. It operates within an ambient temperature range of -10°C to +40°C and a relative humidity of up to 95%. The lamp is designed for mounting on horizontal surfaces.

Key Features:

• LED lighting
• Dimmable
• Adjustable color temperature (via long press on main switch)
• Integrated motion sensor and daylight sensor
• Electrical Protection Class II (double insulation)
• CE certified

Technical Specifications

• Model: MAULsenja 825 88
• Power Connection: CEE 7/4 plug (Type F)
• Voltage: 200-240V~
• Frequency: 50/60 Hz
• Maximum Power: 100W
• Cable Length: Approximately 2.50 m
• Beam Angle (Half Intensity): 100°

Intended Use

The lamp is intended for illuminating rooms and work areas in dry, closed indoor spaces. It is designed for precise work and should not be used in potentially explosive atmospheres.

General Safety Instructions

• Read all enclosed operating instructions and information carefully.
• Observe all warnings on the documentation and the device.
• Use the luminaire only when technically sound and with awareness of risks.
• Follow national safety regulations for installation and operation.
• Install the lamp on a suitable surface using appropriate mounting materials.
• Do not use damaged luminaires.
• Always disconnect the lamp from the power supply before performing any work on it.
• Do not alter or modify the luminaire.
• Do not hang or attach anything to the lamp.
• Do not cover the luminaire.
• Keep children away from the luminaire; it is not suitable for children.
• Disconnect the lamp from the mains and allow it to cool before cleaning or maintenance.
• Clean only with a dry, soft, lint-free cloth.
• If the power cable is damaged, it must be replaced by the manufacturer, service agent, or a similarly qualified person to avoid hazards.
• Light source replacement: Refer to specific instructions for whether replacement requires a skilled electrician or a qualified person.
• Installation, repairs, and disassembly should only be performed by a qualified electrician unless otherwise stated.
• Connect the luminaire to a power supply with an earth connection if required by the system (though this model is Class II).
• Compare mains voltage with the operating voltage on the nameplate to ensure they are identical.

Assembly Instructions

The assembly involves connecting various parts of the lamp. Refer to the part numbers indicated in the diagrams.

• Parts List:
• Part 1: Mounting bracket
• Part 2: Lamp head/light bar
• Part 3: Upper arm segment
• Part 4: Lower arm segment
• Part 5: M4 x 25 screws (6x)
• Part 6: M4 x 12 screws (2x)
• Part 7: Washers Ø4.2 (6x)
• Part 8: SW3 Hex key
• Part 9: SW2.5 Hex key
• Part 10: Power cable
• Step 1: Attach the mounting bracket (Part 1) to the lamp head (Part 2) using M4 x 12 screws (Part 6).
• Step 2: Connect the upper arm segment (Part 3) and the lower arm segment (Part 4) using the internal connectors.
• Step 3: Attach the assembled arm (Parts 3 & 4) to the base using M4 x 25 screws (Part 5) and washers (Part 7), tightening with the SW3 Hex key (Part 8).
• Step 4: Repeat the attachment of the mounting bracket (Part 1) to the lamp head (Part 2) using M4 x 12 screws (Part 6).
• Step 5: Connect the arm segments (Part 3 and Part 4) again.
• Step 6: Secure the connected arm segments (Parts 3 and 4) to the base using M4 x 25 screws (Part 6) and the SW2.5 Hex key (Part 9).
• Step 7: Attach the base assembly to the arm assembly using M4 x 25 screws (Part 5) and washers (Part 7), tightening with the SW3 Hex key (Part 8).
• Step 8: Connect the power cable (Part 10) to the lamp.

Operation

The lamp features multiple control options:

• Indirect Light: Short press the control to switch the indirect light on or off. Long press to dim the indirect light.
• Main Switch (AN/AUS): Short press to switch the entire lamp on or off. The last setting will be saved. Long press to change the color temperature. A brief interruption of the long press may change the direction of color temperature adjustment.
• Direct Light: Short press the control to switch the direct light on or off. Long press to dim the direct light.

Sensors

Motion Sensor / Daylight Sensor

The lamp is equipped with a motion sensor and a daylight sensor, configurable via a dip switch.

• Dip Switch Settings:
• Position 0: Motion Sensor OFF, Daylight Sensor OFF
• Position 1: Motion Sensor ON, Daylight Sensor OFF
• Position 2: Motion Sensor ON, Daylight Sensor ON
• Position 3: Motion Sensor OFF, Daylight Sensor ON

Motion Sensor Functionality

The motion sensor detects presence to control the light. When motion is detected, the light turns on. If no motion is detected for a set period (e.g., 30 minutes or +30 minutes), the light may dim or turn off. The detection range is up to 3500 mm with a detection angle of approximately 85°.

Daylight Sensor Functionality

The daylight sensor adjusts the lamp's brightness based on ambient light levels. When daylight is low, the lamp operates at full brightness. As daylight increases, the lamp dims, and it may turn off completely if sufficient natural light is present.

Spare Parts

The following spare parts are available:

• Art.-No.: 8258809.205 (LED Module)
• Art.-No.: 8258809.200 (LED Module)
• Art.-No.: 8258809.225 (LED Driver)
• Art.-No.: 8258809.220 (LED Driver)
• Art.-No.: 8258809.210 (Power Cable)
• Art.-No.: 8258809.211 (Control Board)

Disposal Information

This product should not be disposed of with unsorted household waste. It must be collected separately as electrical waste at designated facilities. Contact your local city or municipal administration for information on available disposal options and collection facilities.

Energy Efficiency

This product contains a light source of energy efficiency class D (Art.-No.: 8258809.200) and energy efficiency class C (Art.-No.: 8258809.205).

Contact Information

License Holder: Jakob MAUL GmbH

Address: Jakob-Maul-Str. 17, D-64732 Bad König

Tel: +49 (0)6063/502-100

Fax: +49 (0)6063/502-210

Email: contact@maul.de

Website: www.maul.de