MAULsenja 825 89 LED Desk Lamp

Product Specifications

Power: 200-240V~ 50/60 Hz, 100W

Cable Length: Approximately 2.50 meters (CEE 7/4 plug)

Certifications: TÜV Rheinland Certified (ID 1419060608), GS Certified.

Website: www.maul.de

Intended Use

This lamp is designed for precise work in dry indoor areas such as homes, offices, or workshops. It is intended for use with ambient temperatures ranging from -10°C to +40°C and a relative humidity of up to 95%. The luminaire is designed for mounting on horizontal surfaces.

General Safety Instructions

• Please read all enclosed operating instructions and information carefully.
• Observe all warnings indicated in the documentation and on the device.
• Use the luminaire only when it is in technically perfect condition and with an awareness of safety and risks.
• National safety regulations must be followed for installation and operation.
• Install the lamp only on a suitable surface using appropriate mounting materials.
• This lamp is intended for illuminating indoor rooms and work areas only.
• Do not use in potentially explosive atmospheres, as this can lead to explosions, death, or serious injury.
• Installation, repairs, and disassembly should only be performed by a qualified electrician unless otherwise stated.
• The luminaire must be connected to a power supply. (Note: This unit is Class II, meaning it does not require a protective earth conductor due to sufficient insulation).
• Verify that the mains voltage matches the operating voltage and frequency specified on the type plate.
• Do not use damaged luminaires.
• Always disconnect the lamp from the power supply before performing any work on it.
• Do not alter or modify the luminaire.
• Do not hang anything from or attach anything to the lamp.
• Do not cover the luminaire.
• Keep children away from the luminaire; it is not suitable for children.
• Dispose of packaging responsibly according to local regulations.
• Disconnect the lamp from the mains and allow it to cool down before cleaning or maintenance.
• Clean only with a dry, soft, and lint-free cloth.
• If the external flexible cable or cord is damaged, it must be replaced by the manufacturer, their service agent, or a similarly qualified person to avoid hazards.
• For light source replacement, consult the specific operating instructions or packaging for guidance on whether it must be carried out by a trained electrician or a qualified person.

Technical Details & Features

• Electrical Protection Class: II (double insulation, no protective earth conductor).
• Dimmable: Yes.
• Beam Angle: Half intensity angle (100°).
• LED Light Source: Replaceable by a qualified electrician.
• Operating Device: Replaceable by a qualified electrician.
• Declaration of Conformity: MAUL declares that these lamps conform to European Directives and product-specific directives.
• Disposal: This product must not be disposed of in unsorted household waste. It should be collected as electrical waste at designated facilities. Contact your local city or municipal administration for information on disposal options.

Assembly Instructions

Parts List:

• 1 x Lamp Head Assembly
• 1 x Clamp/Arm Assembly
• 3 x Screws (M4 x 25)
• 3 x Washers (Ø4.2)
• 1 x Allen Key (SW3)
• 1 x Wrench
• 1 x Power Cable (CEE 7/4 plug)

Assembly Steps:

Step 1: Attach the lamp head assembly (1) to the arm assembly (2). This involves securing a plate to the underside of the lamp head using three screws (3) and three washers (4), tightened with the Allen key (5).

Step 2: Connect the power cable (7) to the lamp. The connection uses orange plug-in connectors.

Step 3: Mount the arm assembly (2) onto a horizontal surface using the integrated clamp. Adjust the clamp's position and tighten it securely. The clamp can be adjusted for different surface thicknesses. For optimal tightening, use the provided wrench and ensure the torque does not exceed 5 Nm.

Step 4: Connect the power cable (7) to the mains power outlet.

Operation

The lamp features multiple control options for its lighting elements:

Indirect Light Control:

• Short Press: Switches the indirect light ON or OFF.
• Long Press: Dims the indirect light.

Main ON/OFF Switch:

• Short Press: Switches the entire lamp ON or OFF. The last setting is saved.
• Long Press: Changes the color temperature of the light. (A brief interruption of the press may change the light's direction or a setting, as indicated in the manual.)

Direct Light Control:

• Short Press: Switches the direct light ON or OFF.
• Long Press: Dims the direct light.

Sensors (Motion & Daylight)

The lamp is equipped with a motion sensor and a daylight sensor, configurable via a 4-position dip switch:

Dip Switch Settings:

• Position 0: Motion Sensor OFF, Daylight Sensor OFF
• Position 1: Motion Sensor ON, Daylight Sensor OFF
• Position 2: Motion Sensor ON, Daylight Sensor ON
• Position 3: Motion Sensor OFF, Daylight Sensor ON

Motion Sensor Functionality:

• Adjustable delay settings: 30 minutes or +30 minutes after last detected motion.
• Dimming feature: Can reduce brightness by 30% when activated.
• Controls ON/OFF states based on detected movement.
• Detection range: Maximum distance of approximately 3500 mm, with a detection angle of up to 85°.

Daylight Sensor Functionality:

• Automatically adjusts the lamp's brightness based on the ambient light level, turning the light ON or OFF as needed to maintain optimal illumination.

Spare Parts

The following spare parts are available:

• Art.-No.: 8258809.205: LED board
• Art.-No.: 8258809.200: LED board
• Art.-No.: 8258809.225: LED Driver
• Art.-No.: 8258809.220: LED Driver
• Art.-No.: 8258809.210: Cable
• Art.-No.: 8258809.211: LED Driver

Energy Efficiency Information

This product contains a light source of energy efficiency class < D > (Art.-No.: 8258809.200).

This product contains a light source of energy efficiency class < C > (Art.-No.: 8258809.205).