MEE audio lightSPKR Quick Start Guide

What's in the Box

• lightSPKR speaker
• Charging Cable
• 3.5mm Audio Cable

Interface Overview

The lightSPKR features several controls on its top surface, including a central rotating knob and various buttons.

Controls:

• Bluetooth Button:
  • Bluetooth pairing: [long press]
  • Enable/disable stereo mode: [double press]
  • Factory reset: [press and hold 8s]
• Power Button:
  • Power on/off: [long press]
  • Change audio source: [double press] (available if multiple sources are connected)
• Lantern Control: A knob on the top surface allows you to turn the lantern light on/off and adjust its color/brightness.
• Next Track Button: Advance to the next track ([single press]).
• Previous Track Button: Go to the previous track ([single press]).
• Audio Control:
  • Volume up/down: [turn knob]
  • Play/pause: [single press]
  • Siri® / Google Assistant™: [long press]
  • Answer/hang up phone call: [single press]
  • Refuse incoming call: [long press]
  • Change MEE audio mode: [double press]

Button Press Legend: [single press], [double press], [long press]

Charging

Step 1: Plug the USB charging cable into the lightSPKR's charging port.

Step 2: Plug the other end of the charging cable into a powered USB port (e.g., a wall adapter or computer).

Battery Level Indicator:

• > 80%: [Five solid battery indicator lights]
• 60% - 80%: [Four solid, one empty battery indicator lights]
• 40% - 60%: [Three solid, two empty battery indicator lights]
• 20% - 40%: [Two solid, three empty battery indicator lights]
• < 20%: [One solid, four empty battery indicator lights]

Lantern Operation

Step 1: Power on the lightSPKR using the power button ([long press]).

Step 2: Use the top knob to turn on the lantern and adjust its color and brightness.

Note: The lightSPKR will automatically power off after 15 minutes of inactivity, unless the lantern is on or audio is playing.

Bluetooth Pairing

Step 1: Power on the lightSPKR by pressing and holding the power button ([long press]).

Step 2: Initiate Bluetooth pairing by pressing and holding the Bluetooth button ([long press]). A blinking blue light indicates pairing mode.

Step 3: On your device (e.g., smartphone), navigate to Bluetooth settings and select "MEE audio lightSPKR" to connect.

Note: To pair a different device, disconnect the lightSPKR from the current device or long press the Bluetooth button again.

Stereo Mode

Connect two lightSPKRs together for a louder, more immersive stereo sound experience.

Step 1: Connect the first lightSPKR to your device via Bluetooth. This speaker will serve as the left channel.

Step 2: On the left speaker, double press the Bluetooth button ([double press]).

Step 3: On the second lightSPKR (which will serve as the right channel), double press the Bluetooth button ([double press]).

Note: To exit stereo mode, double press the Bluetooth button on the left speaker again.

MEE Audio Modes

Cycle through different sound modes by double pressing the audio control button ([double press]).

Available Audio Modes:

• DYNAMIC: Default mode with enhanced bass and treble for engaging, clear sound.
• BASS BOOST: Enhances bass response and depth for greater impact and immersion.
• VOCAL BOOST: Boosts speech and vocals for improved clarity and intelligibility.

Audio Sources

Switch between Bluetooth, USB, and AUX inputs.

Step 1: Power on the lightSPKR ([long press]).

Step 2: Connect your audio source: plug a 3.5mm audio cable into the AUX input or a USB stick with music into the USB port.

The audio source will automatically switch to the connected device.

Note: If two or more sources are connected, double press the power button ([double press]) to cycle through available sources.

Power Bank Functionality

Use the lightSPKR to charge your devices.

Step 1: Power on the lightSPKR ([long press]).

Step 2: Plug your device into the port labeled "USB" to begin charging.

Note: The device will only charge while the lightSPKR is powered on.

Support and Warranty

Questions? We're here to help!

Phone Support: 626-965-1008 (Monday - Friday, 9 am to 5 pm PST)

Email Support: support@MEEaudio.com (All emails responded to within 2 business days)

For additional support, view our video setup guide at MEEaudio.com/lightSPKRsupport.

Warranty:

This product is covered by a 1-year manufacturer warranty. For more information, visit MEEaudio.com/support.

MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and used under license by MEE audio. Siri® is a registered trademark of Apple Inc. Google Assistant is a trademark of Google Inc.