MEE audio go SPKR
WEARABLE BLUETOOTH CLIP SPEAKER WITH MAGNET
goSPKR Setup Guide
Scan the QR code or visit: MEEaudio.com/goSPKRsupport
QUICK START GUIDE
What's in the box
The package contains:
- goSPKR Wearable Bluetooth Clip Speaker
- Charging Cable
[Image description: A line drawing of the goSPKR device, a compact, rectangular Bluetooth speaker with rounded edges. It features a clip on the back for attachment, a circular multifunction button on the top surface, and two distinct buttons on the side labeled '+' and '-' for volume control. Below the device is a line drawing of a USB-A to USB-C charging cable.]
go SPKR Interface
[Image description: A diagram of the goSPKR device illustrating the placement and function of its buttons. The circular button on top is labeled 'Multifunction button'. The side buttons are labeled 'Volume up button' (with a '+' symbol) and 'Volume down button' (with a '-' symbol). A reset function is indicated by holding both side buttons for 5 seconds.]
Multifunction button (Top button, circular)
- Power on/off: Long press 3 seconds
- Play/pause: Press 1 time
- Siri® / Google Assistant™: Press 3 times
- Answer/hang up phone call: Press 1 time
- Reject incoming call: Long press 3 seconds
- Enable/disable stereo mode: Press 2 times
Volume up button (Side button with '[volume-up]')
- Volume up: Press 1 time
- Next track: Long press 3 seconds
Volume down button (Side button with '[volume-down]')
- Volume down: Press 1 time
- Previous track: Long press 3 seconds
Reset: Hold BOTH buttons ([volume-up] and [volume-down]) for [hold-5s] seconds.
Charging ⚡
[Image description: A diagram illustrating the charging process for the goSPKR. Step 1 shows a USB power adapter connected to a wall outlet, with a USB port depicted. A charging cable is shown connecting to this port. Step 2 shows the other end of the charging cable plugging into the charging port on the goSPKR device. Indicator lights are shown with descriptions: a red light signifies charging, and a green light signifies the device is fully charged.]
Step 1
Plug the charging cable into a powered USB port (e.g., wall adapter, computer).
Step 2
Plug the other end of the charging cable into the goSPKR.
Indicator Lights:
- Red light = charging
- Green light = charged
Bluetooth Pairing Ⓡ
[Image description: A diagram showing the goSPKR device and a smartphone. Step 1 shows the goSPKR being powered on. Step 2 shows a close-up of a smartphone screen displaying Bluetooth settings, with "MEE audio goSPKR" listed as an available device.]
Step 1
Power on the goSPKR.
Step 2
On your device (smartphone, tablet, etc.), go to Bluetooth settings and select "MEE audio goSPKR" to connect.
Note: To pair a different device, remove or disconnect the goSPKR from the Bluetooth menu of the original device before pairing with a new one.
Stereo Mode ✪+ ✪+
Link 2 goSPKRs together for stereo sound!
[Image description: A three-step diagram illustrating how to connect two goSPKR devices for stereo sound. Step 1 shows a smartphone wirelessly connected to one goSPKR. Step 2 shows a finger performing a double-press action on the multifunction button of the first goSPKR. Step 3 shows a finger performing a double-press action on the multifunction button of a second goSPKR, indicating it will then connect to the first.]
Step 1
Connect the first goSPKR to your device via Bluetooth.
Step 2
Double press the [multifunction-button] (circular button) on the first goSPKR.
Step 3
Power on the second goSPKR. If it is paired to another device, unpair it first. Then, double press its [multifunction-button] (circular button).
Note: Double press the [multifunction-button] on either goSPKR to exit stereo mode.
WARNINGS
This device is designed and manufactured to operate within its defined design limits. Misuse may result in electric shock or fire. Read and follow these instructions carefully.
- Battery Safety: Danger of explosion or fire if batteries are damaged. Never attempt to open the battery for any reason. Do not use the device if it has been crushed, pierced, or otherwise damaged in any way that could compromise the battery. Do not leave the speaker in any location with excessive heat, including near naked flames or heat sources like radiators and stoves. Do not expose the battery to spark, flame, or salt water.
- Environment: Do not charge or use around flammable gasses, liquids, or dust, as fire or explosion may occur.
- Repairs: There are no user-replaceable or repairable parts in the device. Disassembling it will void your warranty and may cause personal injury. Changes or modifications to this unit not expressly approved by MEE audio could void the user's authority to operate the equipment.
- Accessories: Only use attachments/accessories specified by the manufacturer.
- Children: Keep the device and packaging out of the reach of children.
SAFETY & CARE
- Hearing Safety: Using speakers at high volumes for extended periods of time can result in permanent hearing damage. It is advised to keep volume levels moderate to low at all times for your safety.
- Battery Longevity: The lifetime of the battery will be significantly reduced if your speaker is not charged for a long time. It is recommended to charge your speaker at least once a month.
- Temperature: Battery performance will be severely decreased when stored in extreme temperatures. Do not store the speaker in locations where temperatures may reach below -10°C/14°F or above 40°C/105°F, including direct sunlight.
- Water Exposure: Do not expose this product to rain or other moisture for an extended period of time. If submersed in water, do not turn the device on until completely dried. Note: liquid submersion voids the warranty.
- Cleaning: Do not use chemical cleaning sprays to clean this product. Only use a water-dampened cloth.
Questions? We're here to help!
Phone Support: 626-965-1008
Monday ~ Friday 9 am to 5 pm PST
Email Support: support@MEEaudio.com
All emails are responded to within 2 business days.
For Additional Support
View our video setup guide:
Scan the QR code or enter the URL below into your web browser:
[Image description: Logos for MEE and SPKR.]
WARRANTY
This product is covered by a 1-year manufacturer warranty. For more information, visit MEEaudio.com/support.
MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MEE audio is under license. Other trademarks and trade names are those of their respective owners.
Siri® is a registered trademark of Apple Inc. Google Assistant is a trademark of Google Inc.