MEE audio Pebbles Truly Wireless Earbuds Setup Guide

Product Overview

The MEE audio Pebbles Truly Wireless Earbuds come with a charging case. Key components include:

• Charging Pins: Located inside the case, these connect to the earbuds for charging.
• Earbud Indicator Lights: Small lights on each earbud that show charging status.
• Case Battery Indicator Light: A light on the charging case indicating its battery status.
• Touch Control Panel: The outer surface of each earbud, used for various functions.
• Charging Port: A USB-C port on the back of the charging case for charging the case itself.

Touch Controls

The MEE audio Pebbles earbuds feature intuitive touch controls on both the left and right earpieces:

Getting Started

1. Remove Film: Carefully remove the protective film from the charging contacts on both earpieces and return them to the charging case.
2. Charge: Charge the earbuds and case for 2 hours using the provided charging cable.
3. Enter Pairing Mode: Remove the charging cable and open the lid of the case. The earbuds will automatically enter pairing mode.
4. Connect via Bluetooth: On your device (e.g., smartphone), open the Bluetooth menu and select "MEE audio Pebbles" from the list of available devices to connect.

Charging

Charge Earbuds

Place the earbuds into the charging case. The earbud indicator lights will flash 3 times to indicate they are charging.

Charge Case

Close the lid of the charging case and plug in the charging cable. The case battery indicator light will show the charging status:

• Slow recurring flash: Case is charging.
• Solid light: Case is fully charged.

Case Battery Indicator

To check the case battery level when the charging cable is not plugged in:

1. Make sure the charging cable is disconnected.
2. Open or close the case lid to activate the indicator light.

Clear Pairings / Pair New Device

If you need to clear existing pairings or connect to a new device:

1. Take out both earpieces and place them in your ears.
2. Tap either earbud 6 times. If successful, you will hear two tones, indicating that the pairings have been cleared and the earbuds are in pairing mode.
3. Open your device's Bluetooth menu and select "MEE audio Pebbles" to connect.

For Additional Support

For a video setup guide and further assistance, visit: MEEaudio.com/PebblesSupport

Contact MEE audio Support:

• Phone Support: 626-965-1008 (Monday - Friday 9 am to 5 pm PST)
• Email Support: support@MEEaudio.com (Emails are typically responded to within 2 business days)

Warranty

This MEE audio product is covered by a 1-year manufacturer warranty. For more information regarding warranty terms and conditions, please visit: MEEaudio.com/support.

Warnings

Using headphones at high volumes for extended periods can result in permanent hearing damage. It is advised to keep volume levels moderate to low for safety. Gradually increase volume after connecting until a comfortable listening level is reached. Do not use headphones while driving, cycling, operating machinery, or performing activities that require awareness of surrounding sounds.

Keep the device and packaging out of reach of children.

This device is designed to operate within its defined design limits. Misuse may result in electric shock or fire. Read and follow these instructions carefully:

• If submersed in water, do not turn the device on until completely dried. Note: Liquid submersion voids the warranty.
• Danger of explosion or fire if batteries are damaged. Keep away from direct sunlight, naked flames, flammable gases, or heat sources such as radiators or stoves.
• Battery performance will be severely decreased when stored in extreme temperatures: below -10°C/14°F or above 45°C/113°F, including direct sunlight.
• Do not use around flammable gases as fire or explosion may occur.
• There are no user-replaceable/reparable parts in the device. Disassembling it will void your warranty.
• Only use attachments/accessories specified by the manufacturer.

Changes or modifications to this unit not expressly approved by MEE audio could void the user's authority to operate the equipment.

Compliance Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Rules

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Disposal and Recycling

Dispose of this product in accordance with all local laws and regulations. Because this product contains electronic components and a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options.