Falcon Ridge

Notice

Please check contents of package for any damage and make sure all parts fit correctly and you are happy with the product before removing protective film. Once the film is removed you cannot return the product for a full refund.

Be sure to read these instructions thoroughly before opening and installing the CF Moto Z Force Aero-Vent Lexan Windshield.

Installation Instructions

1. Check Parts List

   Check over the parts included in the cartons with the parts list shown below:

   • 1 5/8" Loom Clamps - 8 each
   • 1" Stainless Steels Bolts - 9 each
   • Stainless Steel Washers - 9 each
   • Plastic Thumb Nuts - 5 each
   • Large Stainless Washers - 4 each
   • Large Rubber Washers - 4 each
   • Lock Nuts - 4 each
   • Slide Fasteners - 4 each
   • 38" Rubber Gasket - 1 each
   • Lexan Vent Slider - 1 each
   • Lexan Windshield - 1 each

   If any parts are damaged or missing please contact customer service at (606) 845-7439.

2. Prepare for Installation

   Start by pulling it out of the box and find a clean area to lay it down and install the hardware. Begin by peeling off the protective film. Next take the 38" piece of rubber gasket and starting at one end firmly place across the bottom of the windshield. You may need to trim off excess gasket. The diagram below shows where to install the gasket.

   Diagram Description: The diagram shows the bottom edge of the windshield with a 38-inch rubber gasket being applied.

3. Install Sliding Vent Panel

   Next install the sliding vent panel on the inside of the windshield as shown in the diagram on the next page. To install slide fasteners push through holes with thumbs until it is completely through the hole in the windshield and locked in place.

   Diagram Description: An exploded view illustration shows the installation of the sliding vent panel. Components include the windshield, slide fasteners, thumb nuts, washers, and 1-inch bolts. The diagram depicts how the slide fasteners pass through the windshield and secure the vent panel, with washers and bolts used for attachment to the frame.

4. Mount Windshield to Vehicle

   Now the Windshield is ready to be installed. With the help of a friend, place the Windshield on the Gator, setting it up onto the hood.

5. Secure Windshield to Roll Cage

   Take the remaining hardware and install the windshield to the roll cage as shown in the diagram on the next page.

   Diagram Description: A detailed illustration shows the mounting of the windshield to a UTV frame tube. It depicts a stainless steel bolt passing through the windshield, a large stainless washer, a rubber washer, and then secured to the UTV frame tube with a stainless clamp that has a rubber sleeve. A thumb nut is shown on the inside.

6. Final Clamping

   The four clamps that hold the windshield across the top use the large stainless and rubber washers to hold the windshield on. The inside part of it uses a small washer and a lock nut. The following photo shows how it should look.

   Photo Description: A close-up photograph shows the installed windshield secured to the UTV's roll cage using clamps, washers, and bolts. The arrangement matches the described mounting hardware.

7. Enjoy and Clean

   Now you are ready to take it out and enjoy. To clean the windshield, always clean using a liquid of some sort to decrease the chance of scratches. We recommend using microfiber cloths that are readily available at any dollar store. Any window cleaner will work fine; just remember to use a soft clean rag or micro-fiber cloth to clean it.

   Thank you for your purchase!

Return Policy

If for any reason you choose to return this product it must be returned within 30 days from date item is received. You MUST package the product exactly as it was originally packaged from the factory to get a full refund for the product!

The vinyl windows should never be folded when packaging in the box or for storage purposes. Lay all the windows on top of each other with the canvas folded in between and the paper (if available) on both sides of the windows.

All returned products will be inspected upon arrival at the production facility and must be in unused, factory new condition to receive refund - a 25% restocking fee will apply.

If ordered from Falcon Ridge please call at 606-845-7439 to gain a return authorization number, use our preferred shipping carrier (UPS) to return the item (unless the item is defective, you are responsible for paying the shipping to return the item.) Any returns submitted to Falcon Ridge without a return authorization number will be charged a 20% restocking fee. If ordered from one of Falcon Ridge's many distributors', you must first call them and see what their return policy is. Once your item reaches our production facility, our customer satisfaction team will inspect your item to ensure unused, factory new condition. NOTE: All windshields must be returned with the original protective film intact and not removed. Do NOT REMOVE if you have any intentions of returning the item. Refund/ replacement of a windshield will only be processed on items with original protective film or if the windshield is defective.

Items must be properly packaged in the original shipping carton to protect them during transit and ensure your returned item arrives back factory fresh, and in new resalable condition (any returned items that have been used, altered or damaged in any way will not be subject for a refund.) All contents including instruction manuals, accessories, hardware, Velcro, etc. must be included in your return shipment. Only items in OEM factory new condition will be approved. Once returned items are received, credit will be issued to the original credit card/ payment method used for the purchase. Outbound shipping and return shipping cost will not be refunded. Please allow 4 to 6 weeks for your refund to be processed.

Warranty

To The Owner of this Product:

Thank you for purchasing one of Falcon Ridge Cab Enclosures, Tops &/or Windshields! Below are the terms under which your product is covered under our manufacturer's warranty.

30 Day Warranty which includes and is not limited to replacing the enclosure, tops and/or windshield due to defect of the product. Please refer to the return policy in this case for more information.

1 Year Warranty includes any defect in material or workmanship within this time frame we will gladly correct the problem or replace the enclosure, tops &/or windshield. Upon submitting for the correction or replacement we will need to receive pictures of the defect in material or workmanship along with the receipt from the date of purchase.