ART+SOUND ARTWS110 True Wireless Earbuds User Manual
Model: ARTWS110
Product Overview
This document provides instructions for the ART+SOUND True Wireless 4 Piece Bundle with Silicone Accessories.
Image Description: The front cover displays the ART+SOUND logo and the product name "True Wireless 4 Piece Bundle with Silicone Accessories". A visual of the white charging case and two white earbuds is shown.
Before You Begin
Important Safety Information:
- Read this manual carefully and save for future reference.
- ⚠️ To ensure safe and proper use, read all safety information before using the device.
- Only use with manufacturer-approved batteries, chargers, accessories, and supplies.
- THIS DEVICE IS NOT A TOY. Do not allow children or pets to use or play with this device.
- Do not disassemble, modify, or repair the device.
- Do not expose to extreme temperatures (heat or cold), open flames, humid, or wet conditions.
- Do not submerge in water.
- Low power may cause poor Bluetooth connection or sound distortion.
- Do not overcharge battery.
- If using with a USB adapter, make sure the adapter is not damaged.
- Do not allow the USB port or the connectors of the supplied USB cable to be exposed to dust or water, or to come into contact with any conductive materials such as liquids, metallic powders, etc.
- The earbuds and case contain built-in batteries and should not be disposed of with regular household waste. Please consult local authorities on the correct way to dispose of this device.
In the Box
- ARTWS110 - True Wireless Earbuds (x1)
- Charging Case (x1)
- Silicone Case (x1)
- Carabiner (x1)
- Silicone Safety Strap (x1)
- USB Charging Cable (x1)
- User Manual (x1)
Location of Controls
Front of Case: Features a [Power Button] and an LED Indicator.
Back of Case: Features a Micro-USB Charging Port and an LED Indicator.
Earbuds: Each earbud has a [Multi] Button and an LED Indicator.
Charging Case Controls:
- Earbud Charging: Place earbuds into the designated ports within the case.
- Case Charging: Connect a micro-USB cable to the port on the back of the case.
Getting Started
Charging the Case
Connect the small connector of the supplied micro-USB charging cable to the micro-USB charging port on the back of the charging case. Connect the large connector to a USB power source (e.g., computer USB port or a 5V USB adapter). The case-charging LED indicator flashes RED while charging and turns solid RED when fully charged.
Charging the Earbuds
Use the included charging case. Ensure the case is charged. Open the case cover and place the earbuds into the correct charging ports; they should magnetically "clip" into place. The earbuds' LED indicators will turn RED while charging and turn BLUE when fully charged. A tone will be heard when the earbuds are low on battery.
Powering ON/OFF
The earbuds automatically power ON when removed from their case and power OFF when placed back in. When powered ON, they automatically pair to each other and enter Bluetooth pairing mode, potentially connecting to a previously paired device. The earbuds can also be powered ON and OFF by pressing and holding the [Multi] buttons. They will automatically power OFF if they do not connect to a Bluetooth device after 2 minutes.
Adjusting Volume & Playback
Playback can be controlled via the paired device or the earbud controls. Press the [Multi] button once on either earbud to pause or resume playback. Short press and hold the [Multi] button on the main earbud to skip to the next track. Short press and hold the [Multi] button on the auxiliary earbud to skip to the previous track.
Bluetooth Pairing
- Power the earbuds ON. Both LED indicators will flash RED and BLUE.
- The earbuds will pair to each other (indicated by a voice prompt). The main earbud's LED will flash RED and BLUE; the auxiliary earbud's LED will slowly flash BLUE.
- On your mobile device, search for Bluetooth devices and select "ARTWS110" from the list.
- Once paired, a voice prompt will be heard, and both earbud LEDs will turn OFF.
For pairing issues, refer to the "Re-Pairing the Earbuds" section.
Answering/Ending Phone Calls
Press the [Multi] button once on either earbud to answer an incoming call or end an active call. Press and hold the [Multi] button on either earbud to reject an incoming call. Triple-press the [Multi] button on either earbud to redial the last outgoing number.
Activating Voice Assistant
Quadruple-press the [Multi] button on either earbud to activate the voice assistant on your paired device (e.g., Siri, Google Assistant).
Re-Pairing the Earbuds
If earbuds become un-paired or only one connects:
- On your device's Bluetooth settings, "Forget" the earbuds and turn Bluetooth OFF.
- Place earbuds in their case to power OFF, then remove to power ON.
- The earbuds should re-pair automatically, indicated by a voice prompt.
- Turn your device's Bluetooth back ON and follow the "Bluetooth Pairing" instructions to connect to your device.
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications not expressly approved could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, try correcting it by reorienting the receiving antenna, increasing the separation between equipment and receiver, or connecting the equipment to a different outlet.
Radiation Exposure Information: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
FCC Compliance Symbol: [FCC logo]
Warranty Information
90-day Limited Warranty
Territory: United States/Canada
This product is warranted by Southern Telecom, Inc. to the original consumer purchaser against defects in materials and workmanship for 90 days from the date of purchase.
To obtain warranty service:
- Visit the customer support portal: www.customersupport123.com
- Select the brand and model of your device.
- Select "Service Request" and fill out the form.
Exchanges require dated proof of purchase from an authorized retailer. Products received damaged due to shipping require filing a claim with the carrier.
Warranty Exclusions: This warranty does not cover damage from accident, misuse, abuse, improper installation/operation, lack of reasonable care, or unauthorized modifications. It is voided if any unauthorized person opens, alters, or repairs the product.
Southern Telecom, Inc. disclaims all warranties, express or implied, including warranties of merchantability or fitness for a particular purpose, beyond the express warranty period. Remedies are limited to repair, replacement, or refund at Southern Telecom's discretion. Southern Telecom or its manufacturers are not liable for incidental, indirect, special, punitive, or consequential damages.
This warranty is non-transferable and applies only to the original consumer purchaser.
Definitions and Symbols
- [DC symbol]: Direct current symbol.
- [Recycle symbol]: Signifies the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling.
- [CEC energy efficiency symbol]: Signifies battery charging complies with California CEC and energy efficiency standards.
- [Bluetooth logo]: The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
- [FCC logo]: Represents FCC Declaration of Conformity and compliance.
- ⚠️ Li-ion Battery Inside: Do not damage, open, or dismantle the battery. Do not use in damp/corrosive conditions. Use only compatible chargers. Do not expose to fire or high temperatures (exceeding 60°C / 140°F).
