ART+SOUND AR520 Bluetooth Wireless Portable Speaker

Before You Begin

CAUTION

[!] THIS IS NOT A TOY

Please keep away from children

Keep away from water and extreme temperatures

Low power may cause poor Bluetooth connection

Do not overcharge the battery

Questions & Customer Support

For further assistance or any troubleshooting, visit the Southern Telecom website at SouthernTelecom.com and click on Product Support.

In the Box

• AR520 - Wireless Speaker (x1)
• Micro-USB Charging Cable (x1)
• User Manual (x1)

Location of Controls

The speaker has the following controls on its back panel:

• 1. 3.5 mm Auxiliary Input Jack
• 2. Bluetooth LED Indicator
• 3. Micro-USB Charging Port
• 4. Charging LED Indicator
• 5. [POWER] Switch (Off/On)

Diagram Description (Back of Speaker): A diagram shows the back of the speaker with numbered controls: 1. Aux-in, 2. Charging, 3. Off/On switch.

Using the Speaker

Charging the Speaker

Insert the small connector of the supplied micro-USB cable into the Micro-USB Charging Port on the back of the speaker. Insert the large connector into a USB port on a computer, USB charging device, or a 5V USB adapter (not included) and plug into a wall socket.

The Charging LED Indicator will turn solid RED while charging and turn off when fully charged.

Powering ON/OFF

Turn the speaker ON/OFF by moving the [POWER] switch. A tone will be heard, indicating that the speaker is powered ON.

Diagram Description (Power Switch): A diagram shows the power switch in the 'OFF' and 'ON' positions.

Playing Music

To enjoy music wirelessly, ensure the speaker is properly paired to your Bluetooth-enabled device. Once paired, playback and volume adjustment are controlled through your paired device.

If pairing for the first time, consult the "Pairing the Speaker" section.

If using a wired device, consult the "Using with a Wired Device" section.

Pairing the Speaker (Bluetooth)

1. Move the [POWER] switch to the ON position. A tone will be heard, and the Bluetooth LED Indicator will quickly flash BLUE.

2. On your mobile device, search for Bluetooth devices. Select "AR520" from the list of found devices.

3. Once successfully paired, a tone will be heard, and the Bluetooth LED Indicator will slowly flash BLUE.

[!] If a previously paired device is in range when the speaker is turned on, it will automatically re-connect.

On iOS and Android Devices

Navigate to Settings -> Bluetooth. The screenshots provided are typical examples for pairing Bluetooth devices. Your device's interface may differ slightly.

Diagram Description (iOS/Android Pairing): Screenshots show the Bluetooth settings menu on iOS and Android, highlighting the AR520 device in the list of available or paired devices.

Using with a Wired Device (AUX)

Insert one connector of a 3.5 mm auxiliary cable (not included) into the 3.5 mm auxiliary input jack on the back of the speaker. Insert the other connector into the headphone jack of your media-playing device.

When the 3.5 mm auxiliary input jack is in use, all Bluetooth connections are automatically disabled until the cable is removed.

Diagram Description (Wired Connection): A diagram shows a 3.5mm cable connecting the speaker's Aux-in jack to a smartphone's headphone jack.

Legal Information & Warranty

READ CAREFULLY AND KEEP THIS MANUAL

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

WARNING Li-ion Battery Inside

[!] This product is fitted with a Li-ion battery. Do not damage, open, or dismantle the battery. Do not use it in damp and/or corrosive conditions. Use only with compatible chargers. Never dispose of batteries in a fire, and never expose them to high temperatures. Do not expose the product to temperatures exceeding 60°C (140°F).

[!] The crossed-out garbage bin symbol means that you must not dispose of this product together with unsorted household waste.

Rain/Moisture Warning

• Do not expose the unit to extreme temperatures (heat or cold), open flames, humid conditions, or wet conditions.
• Do not submerge in water.
• Do not open this product or attempt to repair the unit yourself should it not be working.

Limited Warranty

90 Days Limited Warranty

In the unlikely event that this product is defective, or does not perform properly, you may within ninety (90) days from your original date of purchase return it to the authorized service center for repair or exchange.

TO OBTAIN WARRANTY SERVICE:

• Go to the Southern Telecom website portal to receive an SRO number.
• Provide proof of the date of purchase within the package (dated bill of sale).
• Prepay all shipping costs to the authorized service center, and remember to insure your return.
• Include a return shipping address (no. P.O. Boxes), a telephone contact number, and the defective unit within the package.
• Describe the defect or reason for returning the product.

Your product will be repaired or replaced, at the option of Southern Telecom, for the same or similar model of equal value if examination by the service center determines the product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier.

The shipping address of the authorized service center is: Customer Service Dept. 36, c/o Southern Telecom, 400 Kennedy Drive, Sayreville NJ 08872.

Should you have any questions or problems concerning this product, please visit the Southern Telecom website and click on Product Support.

Warranty Service Not Provided

This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, and unauthorized modification. This warranty is voided in the event any unauthorized person opens, alters, or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged.

Limitation of Warranty

The warranty stated above is the only warranty applicable to this product. All other warranties, express or implied (including all implied warranties of merchantability or fitness for a particular purpose) are hereby disclaimed. No verbal or written information given by ART+SOUND, its agents, or employees shall create a guaranty or in any way increase the scope of this warranty.

Repair or replacement as provided under this warranty is the exclusive remedy of the consumer. ART+SOUND shall not be liable for incidental or consequential damages resulting from the use of this product or arising out of any breach of any express or implied warranty on this product. This disclaimer of warranties and limited warranty are governed by the laws of the State of New York. Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose on this product is limited to the applicable warranty period set forth above.

Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.

The BLUETOOTH® word mark and logos are owned by the Bluetooth SIG, Inc.

Printed in China v1.02/2018