ART+SOUND AR3001 Retro 6-in-1 Wireless Speaker User Manual

Location of Controls

Front Panel

• 1. Turntable cover
• 2. Volume dial - Power ON/OFF
• 3. AM/FM Radio tuner
• 4. Function dial
• 5. Prev button
• 6. Next button
• 7. AM/FM button
• 8. CD Tray
• 9. PLAY/PAUSE button
• 10. STOP button
• 11. CD OPEN/CLOSE button
• 12. LED display

Back Panel

• 13. AUX input
• 14. DC IN port
• 15. AM/FM antenna

Turntable Controls

• 15. Turntable pickup
• 16. Tone arm
• 17. Speed control switch
• 18. Tone arm lock
• 19. Control perch
• 20. 45 RPM adaptor
• 21. Turntable

Side Panel Controls

• 23. Tape Eject/ Fast-Forward button
• 24. Cassette deck

In the Box

The package includes:

• Bluetooth® Retro 6 in 1 Wireless Speaker
• AUX Cable
• AC Adaptor

Connecting the AC Adaptor

1. Connect the small end of the AC adaptor to the DC5V port on the back of the speaker.
2. Plug the AC adaptor into a power outlet.
3. Slide the [Power ON/OFF] switch to the ON position.

Using the AM/FM Radio

Adjusting the Sound: Turn the Volume dial on the left side of the system.

Selecting an FM Radio Station:

1. Turn the Volume / Power ON/OFF dial to the ON position.
2. Set the Function Knob to the FM position.
3. Turn the FM radio dial to select an FM radio station.

Selecting an AM Radio Station:

1. Switch the AM/FM button to AM.
2. Turn the FM radio dial to select the AM channel you want.

Antenna: For best FM reception, extend the wire antenna located at the back of the unit and move it until you get the best reception.

Using the CD Player

Loading a CD:

1. Turn the Volume / Power ON/OFF dial to ON and set the Function Knob to CD.
2. Press the OPEN/CLOSE button to open the CD tray. Do not force it open by hand.
3. Place the CD on the CD tray with the label side facing upwards.
4. Press OPEN/CLOSE to close the CD tray.

Playing CDs:

• Press the PLAY/PAUSE button to play and pause music. The LED screen will show [II] when paused.
• Press the STOP button to discontinue playback.
• To resume play, press the PLAY/PAUSE button again.
• Press the PREV/NEXT buttons to go to the previous or next song.

Using the Cassette Player

1. Turn the Volume dial - Power ON/OFF dial to the ON position.
2. Turn the Function dial to the TAPE position.
3. Insert the Cassette tape into the Cassette Deck on the left side panel.

Tape Eject / Fast Forward Button:

• Quick press the Tape Eject / Fast Forward button to fast forward.
• Full press the Tape Eject / Fast Forward button inward to eject the tape.
• The tape will stop automatically when finished playing.

Using the Turntable

1. Turn the Volume / Power ON/OFF dial to ON. Set the Function dial to the PH (phonograph) position.
2. Place the record on the turntable.
3. Select the speed (33, 45, or 78 RPM) according to the vinyl record.
4. Remove the stylus guard. Push the lift lever upward to raise the tone arm from its park. Move the cartridge holder gently over the record. The platter will start running automatically. Slowly lower the lever; the tone arm will lower and touch the record surface gently.
5. Push the arm lift lever up to raise the arm. Playback will pause, but the platter will continue running. To resume playing, adjust the lever to lower the arm.

How to Replace the Stylus

To replace the needle, follow these instructions:

Removing the Needle from the Cartridge:

• Place a screwdriver at the tip of the needle head and push downwards in the direction shown in the diagram (refer to original image for 'A').
• Remove the needle head shell by pulling it forwards and pushing downwards.

Pairing the Speaker with a Bluetooth Enabled Device

1. Turn the Volume / Power ON/OFF dial to ON.
2. Turn the Function dial to the BT (Bluetooth) position.
3. The word "BLUE" will flash quickly on the LED screen.
4. Keep the speaker and your Bluetooth-enabled device within 3 feet of each other during pairing.
5. Set your Bluetooth-enabled device to search for Bluetooth devices.
6. When your device finds the speaker, select "AR3001" from the list of found devices.
7. If required, enter the password "0000". Select OK or Yes to pair.
8. After successful pairing, the word "BLUE" will remain solid on the LED screen.

If no paired devices are in range when the speaker is turned on, it will automatically enter pairing mode. If a paired device is in range, the speaker will connect to it automatically.

Note: The screenshots in the original manual are typical and may differ slightly from your device's interface.

Using as a Wired Speaker

1. Turn the Volume / Power ON/OFF knob to ON.
2. Set the Function Knob to the AUX position. The word "LINE" will appear on the LCD.
3. Connect the two ends of the included Audio cable to the AUX-IN port on the back of the speaker (white end into white port, red end into red port).
4. Insert the 3.5mm Auxiliary end of the cable into the output jack on your computer, mobile phone, or tablet.
5. Open a media player on your device and click Play to start your music.

Legal Information

Caution: Any changes or modifications not expressly approved could void the user's authority to operate the equipment.

FCC Part 15:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CLASS I LASER PRODUCT

This set employs an optical laser beam system in the CD mechanism designed with built-in safeguards. Do not attempt to disassemble. Exposure to this invisible laser light beam may be harmful to the human eye. This is a Class 1 laser product. Use of controls, adjustments, or procedures other than those specified herein may result in hazardous laser light beam exposure. This compact disc player should not be adjusted or repaired by anyone except qualified service personnel. The laser mechanism in the set corresponds to the stylus (needle) of a record player. Although this product uses a laser pick-up lens, it is completely safe when operated according to directions.

Safety Information

• This appliance is for household, indoor use only.
• Please do not use or store the unit in high temperature or hazardous locations.
• Please do not submerge the unit into water, as this will damage the speaker.
• To avoid injury, ensure the device is dry and away from moisture before operating.
• The warranty for this product is invalidated if the product has been tampered, repaired, or modified in any way.
• Do not listen to music at high volume for long periods, as it may cause damage to your ears.

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use the product for any purpose other than its intended use.

Limited Warranty

90 Days Limited Warranty

If this product is defective or does not perform properly, you may return it within ninety (90) days from your original date of purchase to the authorized service center for repair or exchange.

TO OBTAIN WARRANTY SERVICE:

• Call the Customer Support number provided below, or visit the website portal to receive an SRO number.
• Provide proof of the date of purchase within the package (Dated bill of sale).
• Prepay all shipping costs to the authorized service center and insure your return.
• Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within the package.
• Describe the defect or reason for return.

Your product will be repaired or replaced, at the option of the service center, with the same or a similar model of equal value if examination determines it is defective. Products received damaged due to shipping will require you to file a claim with the carrier.

The shipping address of the authorized service center is:

Southern Telecom, Inc.
Attention: Customer Service (2nd Floor)
14-C 53rd Street
Brooklyn, NY 11232

For questions or problems concerning this product, contact customer service:

Customer Support:
Phone: 1-877-768-8481
Monday-Friday 8AM-10PM (EST)
Website: www.southerntelecom.com (Click on "Product Support")

Warranty Service Not Provided:

This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, and unauthorized modification. This warranty is voided if any unauthorized person opens, alters, or repairs this product. All products returned for repair must be suitably packaged.

Limitation of Warranty:

• The warranty stated above is the only warranty applicable to this product. All other warranties, express or implied (including implied warranties of merchantability or fitness for a particular purpose), are hereby disclaimed. No verbal or written information given by ART+SOUND, its agents, or employees shall create a guaranty or in any way increase the scope of this warranty.
• Repair or replacement as provided under this warranty is the exclusive remedy of the consumer. ART+SOUND shall not be liable for incidental or consequential damages resulting from the use of this product or arising out of any breach of any express or implied warranty on this product. This disclaimer of warranties and limited warranty are governed by the laws of the State of New York. Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose on this product is limited to the applicable warranty period set forth above.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.