ART+SOUND AR655 Mini Wireless Bluetooth Speaker
User Manual
In the Box
Contents:
- Wireless Speaker
- Micro-USB Charging Cable
Diagram Description: The 'In the Box' section shows an illustration of the ART+SOUND wireless speaker and a separate illustration of the Micro-USB charging cable.
Pairing the Speaker
Follow these steps to connect your speaker via Bluetooth:
- Turn the speaker ON by long-pressing the [Power Button]. A tone will indicate power, and the LED indicator will flash BLUE rapidly.
- On your mobile device, enable Bluetooth and search for devices.
- Select "AR655" from the list of found devices.
- A tone will confirm successful pairing, and the LED indicator will flash BLUE slowly.
If a previously paired device is in range, the speaker will connect automatically when turned on.
Diagram Description: The 'Pairing the Speaker' section includes illustrations of Bluetooth settings on iOS and Android devices, showing how to find and connect to the AR655. It also shows a graphic of a smartphone connecting wirelessly to the speaker.
Using the Speaker
Powering ON/OFF
Long-press the [Power Button] to turn the speaker ON or OFF. A tone will sound upon powering on.
Using the Lights
Press the [Light Mode Button] on the back panel to cycle through four different light modes.
Playing Music
Once paired via Bluetooth, control music playback and volume using your connected device.
Charging the Speaker
Ensure the speaker is charged for at least 3-5 hours before first use.
- Connect the small end of the supplied Micro-USB cable to the Micro-USB charging port on the speaker's back panel.
- Connect the larger end to a USB port on a computer, a USB charging device, or a 5V USB adapter (not included) plugged into a wall socket.
The LED indicator will be RED while charging and turn off when fully charged.
Diagram Description: The 'Charging the Speaker' section illustrates connecting the Micro-USB cable from the speaker's charging port to a USB power source.
NOTE: A tone will alert you when the speaker's battery is low.
Using with a Wired Device
Connect an audio source using a 3.5mm auxiliary cable:
- Plug one end of the 3.5mm auxiliary cable into the auxiliary input jack on the speaker's back panel.
- Plug the other end into the headphone jack of your media device.
Connecting the audio cable will override Bluetooth mode. When disconnected, the speaker will automatically reconnect to the last paired Bluetooth device if enabled.
Diagram Description: The 'Using with a Wired Device' section shows a 3.5mm auxiliary cable connecting the speaker's auxiliary input jack to a smartphone's headphone jack.
Location of Controls (Back Panel)
The back panel of the speaker features the following controls and ports:
- 1. LED Indicator
- 2. 3.5mm Auxiliary Input Jack
- 3. Micro-USB Charging Port
- 4. [Light Mode Button]: Press to cycle through light modes.
- 5. [Power Button]: Press and hold to turn the speaker ON/OFF.
Diagram Description: A diagram labels five points on the back panel of the speaker: LED Indicator, 3.5mm Auxiliary Input Jack, Micro-USB Charging Port, the Light Mode button, and the Power button.
Legal Information & Limited Warranty
FCC Statement
This equipment complies with Part 15 of the FCC Rules. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the manufacturer may void the user's authority to operate the equipment.
Diagram Description: The FCC statement includes a note about RF exposure, stating the device meets general requirements and can be used in portable conditions without restriction.
90 Days Limited Warranty
ART+SOUND offers a 90-day limited warranty from the original purchase date for repair or exchange. To obtain service, visit the website portal for an SRO number, include proof of purchase, prepay shipping costs, and provide a return address and contact number. The warranty does not cover damage from accident, misuse, abuse, improper installation, or unauthorized modification. This warranty is void if the product is opened or altered by unauthorized persons.
Diagram Description: The warranty section includes a note about shipping the product to the authorized service center at Customer Service Dept. 36, c/o Southern Telecom, 400 Kennedy Drive, Sayreville, NJ 08872. It also mentions limitations on implied warranties and exclusion of incidental or consequential damages, governed by New York law.
Warranty Service Not Provided: Damage from accident, misuse, abuse, improper installation or operation, lack of reasonable care, and unauthorized modification.
Limitation of Warranty: Express or implied warranties of merchantability or fitness for a particular purpose are disclaimed. ART+SOUND is not liable for incidental or consequential damages.
Questions and Customer Support
For further assistance or troubleshooting, please visit the website:
Click on "Product Support".
