AstroAI ATJ-8566 SMART PORTABLE AIR PUMP

INTRODUCTION

Thank you for purchasing the Smart Portable Air Pump. This compact pump is designed to conveniently inflate various tires, sports equipment, and more. This versatile pump can also be used as a flashlight and a power bank!

For the best experience, please read and follow these instructions carefully. Keep this user manual for future reference.

We hope you enjoy your Smart Portable Air Pump!

Please read and understand this manual fully before using this product and keep it for reference.

WARNING

• The product should not be used without active monitoring.
• Do not place the product near flammable or explosive items.
• Avoid storing the product in excessively humid or dusty environments. Avoid placing the product where it can easily fall.
• Prolonged use may cause overheating, which can lead to long-term damage to the product. After 15 minutes of continuous use, allow the product to cool down for at least 12 minutes. Prolonged use is not recommended.
• The hose will be hot after inflation. To avoid the risk of burns, please wait for the hose to cool down before detaching it.
• The product may produce a noise of approximately 80db (decibels); please use it only in appropriate environments.
• Do not dispose of the product in fire or elsewhere.
• This product should only be used by adults.

ILLUSTRATIONS

1. Hose connection port

2. Current mode

3. Battery level

4. Settings button [M]

5. Power button [Power Icon]

6. LED Light [Light Icon]

7. Current pressure level

8. Unit

9. '+' button

10. LED button

11. '-' button

GETTING STARTED

Charging

• Ensure the battery has sufficient power for inflation.
• Use a 5V 2A charger to charge the product. (Sold separately)
• Connect one end of the Type-C cable to the air pump and the other end of the cable to a 5V 2A adapter to charge the product.
• The battery symbol flashes after the device is powered on.
• The battery symbol lights up once it is fully charged.
• Battery level displayed: 30%-50%-100%.

INSTRUCTIONS

I. Powering On and Off

• Press and hold the power button for 2 seconds to turn the product on.
• Press and hold the power button for 2 seconds to turn the product off. The product will automatically turn off after three minutes of inactivity or when the battery is low.

II. Changing Units/Modes

• Press and hold the setting button to switch between the four units: PSI, Bar, kPa, kg/cm².
• Press the settings button to switch between the five preset modes: Car, Motorcycle, Bicycle, Basketball, and Custom mode (No icon for custom mode).

III. Presetting Pressure Value

Once the product is turned on, press the '+' and '-' buttons to slowly adjust the pressure value. Or press and hold the '+' and '-' buttons to quickly adjust the pressure value. Once the desired air pressure value is entered, the value will flash three times and set.

IV. Connecting the Hose

Connect one end of the air hose to its connection port and tighten it clockwise. Then, connect the other end of the air hose to the tire valve and tighten it.

V. Starting Inflation

Press the power button to start inflating. The digital screen displays the real-time pressure value. A noise is produced during inflation. Prolonged use will cause the air hose to heat up. Avoid touching the air hose and connector with bare hands immediately after use.

VI. Stopping Inflation

• Once the preset air pressure is reached, the pump will stop automatically.
• Press the power button to manually stop inflation.

VII. Turning on the LED Light

• Press the LED button once to activate the flashlight function.
• Press the LED button a second time to activate the SOS emergency light function.
• Press the LED button a third time to activate the strobe function.
• Press the LED button a fourth time to turn off the flashlight function.

VIII. Pressure Measurement

When the air hose is connected to the object to be inflated and powered on, the inflator's screen will display its real-time pressure.

IX. Power Bank

The product's USB output port is designed to charge electronic devices.

MAINTENANCE

• Store the product in a cool, dry place. Avoid storing the product in direct sunlight.
• Keep the storage bag clean to extend the product's lifespan.
• This product uses lithium batteries. Please charge the product to 50%-80% battery level before long-term storage. Store the product in a cool, dry place. To extend battery life, charge the product at least once every three months during storage.

TROUBLESHOOTING/FAQ

• If the product does not turn on, please check the battery level. The lithium battery may discharge when inactive.
• If the inflation speed slows down, ensure the connection between the air nozzle and the tire stem is secure.
• The product may heat up after prolonged use as the air compression process generates heat.
• The product will produce approximately 80db (decibels) of noise during inflation, which is normal noise generated by the pump's mechanical processes.
• If the product overheats, it may shut down and/or fail to turn on. This is the built-in overheat protection that activates automatically. Please allow the product to cool down before attempting to use it again.
• Battery capacity and lifespan will be reduced in a low-temperature environment. While this is normal, it should be avoided if possible.

SPECIFICATIONS

RECYCLING

You can dispose of the product when its lifespan is over. Please recycle recyclable parts according to local guidelines.

PACKAGE CONTENTS

• Smart Portable Air Pump x 1
• Presta Adapter x 1
• Needle Valve Adapter x 1
• Swim Ring Nozzle x 1
• Inflatable Mattress Nozzle x 1
• Type-C Charging Cable x 1
• Inflation Tube x 1

WARRANTY PERIOD

2-Year Limited Warranty from AstroAI.

Each AstroAI Smart Portable Air Pump shall be free from defects in material and workmanship.

This warranty does not cover damage resulting from negligence, misuse, contamination, alteration, accident, or abnormal conditions of operation or handling. This warranty covers only the original purchaser and is non-transferable.

AstroAI always wants to provide its customers with excellent products and quality customer service.

Questions or concerns? We're happy to help!

Please contact us via support@astroai.com

Web: www.astroai.com

E-mail: support@astroai.com