ATJ-8566 SMART PORTABLE AIR PUMP

Foreword

Thank you for choosing the smart portable air pump. This compact air pump is designed for the convenient inflation of various tires, sports accessories, and more. The versatile air pump can also be used as a flashlight and a power bank!

Please read and follow these instructions carefully for an optimal user experience. Keep this manual handy.

We hope you enjoy your smart portable air pump!

Please read this manual thoroughly before use and keep it for future reference.

WARNINGS

• The device should not be operated without active supervision.
• Do not place the device near flammable or explosive objects.
• Do not store the device in an excessively humid or dusty environment. Do not place the device where it can easily fall.
• Extended operating time can lead to overheating, which can cause long-term damage to the device. Allow the device to cool down for at least 12 minutes after 15 minutes of continuous use. Longer operating times are not recommended.
• The hose is hot after inflation. Please wait for it to cool down before removing the hose to avoid burns.
• The device's noise level is approximately 80db (decibels); please use it only in suitable environments.
• Do not throw the device, especially into fire.
• This device should only be used by adults.

PRODUCT ILLUSTRATION

1. Air Hose Opening

2. Current Mode

3. Battery Level

4. Setting Button

5. Power Button

6. LED Light

7. Current Pressure Value

8. Unit

9. "+" Button

10. LED Button

11. "-" Button

12. USB-C Charging Cable

13. Air Hose

14. Presta Valve Adapter

15. Swimming Ring Nozzle

16. Air Mattress Nozzle

17. Needle Valve Adapter

PREPARATION

Charging

• Ensure the battery is sufficiently charged for inflation.
• Use a 5V 2A charger to charge the product (sold separately).
• Connect one end of the USB-C cable to the air pump and the other end to a 5V 2A charger to charge the product.
• The battery icon will flash after the device is turned on. The battery icon will be solid when the device is fully charged. Battery level indication: 30%-50%-100%.

INSTRUCTIONS

I. Powering On and Off

• Press and hold the Power button for 2 seconds to turn the device on.
• Press and hold the Power button for 2 seconds to turn the device off. The device will automatically shut off if it is not operated for 3 minutes or if the battery level is low.

II. Switching Units/Modes

• Press and hold the Setting button to switch between the following four units: PSI, Bar, kPa, kg/cm².
• Press the Setting button to cycle through the five preset modes: Auto, Motorcycle, Bicycle, Basketball, and Custom Mode. Custom Mode displays no icon.

III. Presetting the Pressure Value

Press the "+" and "-" buttons when the device is on to slowly adjust the pressure value. Alternatively, press and hold the "+" and "-" buttons to adjust the pressure value faster. Once you have set the desired air pressure value, it will flash three times.

IV. Connecting the Air Hose

Connect one end of the air hose to the air hose opening and then twist it clockwise to secure it. Then, firmly insert the other end of the air hose onto the tire valve.

V. Starting the Inflation Process

Press the Power button to start the inflation process. The digital display will show the real-time pressure value. There will be some noise during inflation. The air hose will become hot with prolonged use. Avoid touching the air hose and adapter directly with bare hands after use.

VI. Stopping the Inflation Process

• The air pump will automatically turn off once the preset air pressure is reached.
• Press the Power button to manually stop the inflation process.

VII. LED Lighting

• Press the LED button once to activate the flashlight function.
• Press the LED button a second time to activate the SOS emergency light function.
• Press the LED button a third time to activate the strobe function.
• Press the LED button a fourth time to deactivate the flashlight function.

VIII. Pressure Measurement

When the air hose is connected to the object to be inflated and the device is turned on, the display will show the real-time pressure.

IX. Power Bank

The USB output of the device is designed to charge electronic devices.

MAINTENANCE AND CARE

• Store the device in a cool, dry place. Avoid storing the device in direct sunlight.
• Keep the storage bag clean to extend the device's lifespan.
• This device uses lithium batteries. Please charge the device's battery to 50%-80% before storing it for a long time. Store the device in a dry and cool place. Recharge the device at least every three months during prolonged storage to extend battery life.

TROUBLESHOOTING/FAQ

• If the device does not turn on, please check the battery level. The lithium battery may discharge if not used for a long time.
• If the inflation speed seems slow, ensure the connection between the air nozzle and the tire valve is airtight.
• The device may become warm after prolonged use, as the air compression process generates heat.
• If the device overheats, it may shut off automatically and/or not turn on. This means the built-in automatic overheat protection has been activated. Please allow the device to cool down before using it again.
• The device generates a noise level of approximately 80db (decibels) during inflation. This is normal noise resulting from the pump's mechanical processes.
• Battery capacity and lifespan decrease in cold ambient temperatures. While this is normal, it should be avoided if possible.

SPECIFICATIONS

RECYCLING

You can dispose of the product when it is no longer usable. Please recycle the recyclable parts according to local guidelines.

PACKAGE CONTENTS

• Smart Portable Air Pump ..... x1
• Presta Valve Adapter ..... x1
• Needle Valve Adapter ..... x1
• Swimming Ring Nozzle ..... x1
• Air Mattress Nozzle ..... x1
• USB-C Charging Cable ..... x1
• Air Hose ..... x1

WARRANTY PERIOD

2-Year Limited Warranty from AstroAI.

All AstroAI Smart Portable Air Pumps are free from defects in material or workmanship.

This warranty does not cover damage caused by negligence, misuse, contamination, modification, accidents, or abnormal conditions of use or handling. This warranty applies only to the original purchaser and is non-transferable.

At AstroAI, we always aim to provide our customers with excellent products and outstanding customer service.

Questions or concerns? We are happy to help!

Please contact us at support@astroai.com

Web: www.astroai.com

E-mail: support@astroai.com