Material Declaration Form

STMicroelectronics

General Information

IPC	1752
Form type*	Distribute
Sectionals*	2
Material information	A-D
Manufacturing information	*: Required Field
Version	2
Subsectionals*	A-D

Supplier Information

Company name*	STMicroelectronics
Contact name*	Refer to Supplier Comment section
Contact phone*	Refer to Supplier Comment section
Authorized representative*	MDG CHAMPION
Representative phone*	Refer to Supplier Comment section
Contact email*	Refer to Supplier Comment section
Representative title*	MDGMaterial Declaration champion
Representative email*	Refer to Supplier Comment section

Supplier comment: Online Technical Support - STMicroelectronics: http://www.st.com/web/en/support/support.html

Uncertainty Statement

While STMicroelectronics has endeavored to provide information which is accurate and up to date, this document and its contents are provided on a strict 'as is' and 'as available' basis. STMicroelectronics disclaims all warranties, express or implied related to this document and its contents, including but not limited to implied warranties of completeness, truth, accuracy, merchantability, fitness for a particular purpose and non-infringement. ST shall have no responsibility and assumes no liability for any cost, loss or damage of any kind which could arise, directly or indirectly, from the use or inability to use this document and/or its contents.

Legal Statement

Supplier acceptance*	true
Legal declaration*	Standard

Supplier certifies that it gathered the provided information and such information is true and correct to the best of its knowledge and belief, as of the date that Supplier completes this form. Supplier acknowledges that Company will rely on this certification in determining the compliance of its products. Company acknowledges that Supplier may have relied on information provided by others in completing this form, and that Supplier may not have independently verified such information. However, in situations where Supplier has not independently verified information provided by others, Supplier agrees that, at a minimum, its suppliers have provided certifications regarding their contributions to the part(s), and those certifications are at least as comprehensive as the certification in this paragraph. If the Company and the Supplier enter into a written agreement with respect to the identified part(s), the terms and conditions of that agreement, including any warranty rights and/or remedies provided as part of that agreement, will be the sole and exclusive source of the Supplier's liability and the Company's remedies for issues that arise regarding information the Supplier provides in this form.

Product Details

Mfr item number	STM32L496RGT3
Mfr item name	625W*461XXXB
Amount	347
Version	A
Unit of measure	mg
Manufacturing site	998Z
Unit type	Each
date	2025-07-22
ST ECOPACK grade	ECOPACK® 2

Manufacturing Information

J-STD-020 MSL rating	3
Bulk solder termination	Not Applicable
Package designator	QFP
Classification temperature	260
Terminal plating	Tin (Sn), matte, annealed
Package size	10x10
Package	5W LQFP 64 10x10x1.4 10051434
Number of reflow cycles	3
Terminal base alloy	Copper Alloy
Number of instances	64
Shape	Gull wing
Comment	0

RoHS Compliance

RoHS Directive 2011/65/EU - 8 June 2011, Annex II amended by Delegated Directive 2015/863 - 31 March 2015

1. Product(s) meets EU RoHS requirement without any exemptions
2. Product(s) meets EU RoHS requirements except lead in solder and this usage may qualify under the lead in solder '7b' exemption (other selected exemptions may apply)
3. Product(s) meets EU RoHS requirements by application of the selected exemption(s)
4. Product(s) does not meet EU RoHS requirements and is not under exemptions

Exemption Id	Description	Response
		true
		false
		false
		false

REACH Compliance

Date: 21st January 2025

1. Product(s) does not contain REACH Substances Of Very High Concern above the limits per the definition within REACH

CategoryLevel_Name	CategoryLevel_Threshold	amount in product (mg)	Application	Response
#N/A	0	true		true

Material Composition Declaration

Note: Substance present with less 0.001mg will not be declared in this document

Mfr Item Name	Homogeneous material	Material group	Mass	Unit of measure	Level	Substance category	Substance	CAS	Exempt	Mass	Unit of measure	Concentration in homogeneous material (ppm)	Concentration in product (ppm)
625W*461XXXB	Die or dies	M-011 Other inorganic materials	17.072	mg	supplier	die	Silicon (Si)	7440-21-3		15.565	mg	911738	44914.77
					supplier	metallization	Aluminium (Al)	7429-90-5		0.069	mg	4032	198.63
					supplier	metallization	Copper (Cu)	7440-50-8		0.642	mg	37634	1853.96
					supplier	metallization	Tantalum (Ta)	7440-25-7		0.207	mg	12097	595.93
					supplier	metallization	Titanium (Ti)	7440-32-6		0.008	mg	448	22.07
					supplier	metallization	Tungsten (W)	7440-33-7		0.008	mg	448	22.07
					supplier	Passivation	Silicon Nitride	12033-89-5		0.161	mg	9409	463.51
					supplier	Passivation	Silicon Oxide	7631-86-9		0.413	mg	24194	1191.86
					supplier		Organic Compounds	Acrylic resin	Proprietary		0.069	mg	70000	199.28
	Glue epoxy (EN4900GC)	Other Organic Materials	0.987	mg	supplier		Organic Compounds	Polybutadiene derivative	Proprietary		0.020	mg	20000	56.94
					supplier		Organic Compounds	Butadiene copolymer	Proprietary		0.015	mg	15000	42.70
					supplier		Organic Compounds	Acrylate	Proprietary		0.053	mg	54000	153.73
					supplier		Organic Compounds	Epoxy resin	Proprietary		0.030	mg	30000	85.41
					supplier		Organic Compounds	Peroxide	Proprietary		0.008	mg	8000	22.78
					supplier		Organic Compounds	Additive	Proprietary		0.018	mg	18000	51.24
					Encapsualtion (EME-G700LAL-A)	Other Organic Materials	222.038	mg	supplier	Metals	Silver	7440-22-4		0.774	mg	785000	2234.84
									supplier	Organic Compounds	Epoxy Resin	Proprietary		12.212	mg	55000	35239.09
									supplier	Organic Compounds	Phenol Resin	Proprietary		4.663	mg	21000	13454.93
									supplier	Glass	Silica(Amorphous)A	60676-86-0		177.630	mg	800000	512568.64
									supplier	Glass	Silica(Amorphous)B	7631-86-9		26.423	mg	119000	76244.59
									supplier	Organic Compounds	Carbon Black	1333-86-4		1.110	mg	5000	3203.55
									Bonding wire (Cu)	Bonding Wire	0.715	mg	supplier	Metals	Copper	7440-50-8		0.690	mg	965500	1992.11
													supplier	Metals	Palladium	7440-05-3		0.022	mg	31000	63.96
					supplier	Metals	Gold	7440-57-5						0.003	mg	3500	7.22
Plating anode (Sn)	Other inorganic materials	1.438	mg	supplier	Metals	Tin	7440-31-5						1.438	mg	1000000	4149.07
Plating anode (Sn)	Other inorganic materials	1.438	mg	Leadframe (C7025 + Ag)	Copper & its alloys	104.300	mg	supplier	Metals	Copper	7440-50-8		101.536	mg	973499	292991.17
supplier	Metals	Iron	7439-89-6						2.377	mg	22790	6859.04
supplier	Metals	Phosphor	7723-14-0						0.026	mg	250	75.24
supplier	Metals	Zinc	7440-66-6						0.131	mg	1260	379.22
supplier	Metals	Siliver	7440-22-4						0.229	mg	2200	662.13
SVHC					Metals	Lead	7439-92-1		0.000	mg	1	0.30

	STMicroelectronics STM32U585QII6Q Material Declaration Form Detailed material declaration form for STMicroelectronics STM32U585QII6Q, including general information, supplier details, uncertainty and legal statements, product and manufacturing information, RoHS and REACH compliance status, and a comprehensive material composition breakdown.
	STMicroelectronics STM32F205RFT6 Material Declaration Form Detailed material declaration for the STMicroelectronics STM32F205RFT6 microcontroller, covering general information, manufacturing details, compliance with RoHS and REACH, and comprehensive material composition.
	STMicroelectronics Material Declaration Form for STM32F205RGY6TR Material declaration form for the STMicroelectronics STM32F205RGY6TR component, detailing material composition, RoHS and REACH compliance status, and supplier information according to IPC-1752 standards.
	STMicroelectronics BLUENRG-345MC Material Declaration and Compliance Information This document provides a detailed material declaration for the STMicroelectronics BLUENRG-345MC integrated circuit, including its RoHS and REACH compliance status, manufacturing details, and a comprehensive breakdown of its material composition as per IPC-1752 standard.
	STMicroelectronics STM32G431RBI3 Material Declaration (IPC-1752) Detailed material declaration for the STMicroelectronics STM32G431RBI3 microcontroller, including compliance information for RoHS and REACH, and a breakdown of constituent materials according to IPC-1752 standards.
	STMicroelectronics STM32F205RET6 Material Declaration Form (IPC-1752) Official material declaration form for the STMicroelectronics STM32F205RET6 microcontroller, detailing substance composition, RoHS compliance, and REACH information according to IPC-1752 standards.
	STMicroelectronics STM32L081CZT6 Material Declaration \| RoHS & REACH Compliance Official IPC-1752 material declaration for STMicroelectronics STM32L081CZT6 microcontroller, detailing substance composition, RoHS, and REACH compliance.
	STMicroelectronics STM8AF6248TAY Material Declaration (IPC-1752) Detailed material declaration for the STMicroelectronics STM8AF6248TAY microcontroller, including RoHS and REACH compliance status, and material composition data according to IPC-1752 standard.