Step2 Cascading Cove Sand & Water Table with Umbrella

Model Numbers: 8509, 4986, 4020

Product Line: Sea, Sand & Shade Activity Center™

Manufacturer: The Step2 Company, LLC.

Safety Information

Important Warnings

⚠️ CHOKING HAZARD: Small parts. Sharp points. Adult assembly required.

⚠️ DROWNING HAZARD: There is a risk of young children drowning around open containers of water. Adult supervision is always required.

⚠️ BURN HAZARD: Always check the temperature of the product before letting your children play with it. Remember that the product may cause burns if left in direct sunlight. Always be aware of the sun and weather conditions, and do not assume that the equipment is safe because the air temperature is not very high.

General Safety & Usage

Intended for children from ages 1 1/2 years and up.

Observe all statements and warnings to reduce the likelihood of serious or fatal injury. Save this sheet for future reference.

Adult assembly required.

Provide continuous adult supervision at all times.

Instruct children not to use the product until properly assembled.

Holds up to 3 gallons (11.35 liters) of water and up to 10 lbs (4.53 kg) of sand.

Table legs are not removable. Attempting to remove legs can cause damage to the product.

Take indoors or do not use when the temperature drops below 32°F (0°C).

Assembly Instructions

Parts List

A: Table Top/Tray
B: Main Table Body/Base
C: Umbrella
D: Umbrella Pole
E: Legs (x4)
F: Securing Bracket
G1: Connector/Washer (x2)
G2: Connector/Clip (x2)
G3: Connector/Washer (x2)

Fasteners

Eight 1-1/2 inch screws
One 1 inch screw

Assembly Steps

Step 1: Prepare Leg Attachments

Take one G1 and one G2 component.

Step 2: Attach G2 and G1 to Base

Insert one G2 into a designated hole on the underside of the main table body (B). Attach one G1 to G2.

Step 3: Position G1 and G3

Take one G1 and one G3. Place them onto designated points on the underside of the main table body (B).

Step 4: Secure G1 and G3

Securely twist G1 and G3 together. Ensure the connection is firm (indicated by a checkmark ✔️).

Step 5: Insert Second G2

Insert the second G2 into another designated hole on the underside of the main table body (B).

Step 6: Align Leg

Align one leg (E) with its attachment point on the main table body (B).

Step 7: Secure Leg

Secure the leg (E) to the main table body (B) using two 1-1/2 inch screws.

Repeat for Remaining Legs

Repeat steps 6 and 7 for the remaining three legs (E).

Step 8: Insert Umbrella Pole

Insert the umbrella pole (D) into the central opening on the table top (A).

Step 9: Attach Securing Bracket

Attach the securing bracket (F) to the underside of the table top (A) using one 1 inch screw.

Step 10: Position Pole with Bracket

Position the umbrella pole (D) through the bracket (F) and the table top (A).

Step 11: Secure Pole

Ensure the bracket (F) is firmly attached to secure the umbrella pole (D).

Step 12: Attach Umbrella

Slide the umbrella (C) onto the top of the umbrella pole (D). Secure it using the built-in locking mechanism.

Step 13: Note on Umbrella Design

Note that the umbrella design and color may vary.

Step 14: Secure Umbrella to Table

Use the provided ties to secure the umbrella to the table top (A) for stability.

Cleaning and Disposal

Cleaning Instructions

General Cleaning: Use a 50/50 mixture of white vinegar and water.

Parents should thoroughly wash accessories with mild soapy water before use.

Water should be changed frequently.

Sanitize occasionally to remove organic debris and prevent bacterial growth.

Disposal Instructions

Please recycle when possible. Disposal must be in compliance with all government regulations.

Important Information

Inspect this product before each use. Tightly secure connections and replace damaged or worn components.

Contact The Step2 Company for replacement parts.

For more information or to provide feedback, visit: www.step2.com/survey/?partnumber=850900

	Step2 Fiesta Cruise Water Table with Umbrella Assembly and Safety Guide Detailed assembly instructions, safety warnings, and usage tips for the Step2 Fiesta Cruise Water Table with Umbrella (Model 8948). Covers drowning, burn, and choking hazards, cleaning, and disposal. Suitable for children aged 2+.
	Step2 Dino Dig Sand & Water Table Assembly Instructions and Safety Guide Provides comprehensive assembly instructions, safety warnings, and cleaning tips for the Step2 Dino Dig Sand & Water Table. Learn how to safely build, use, and maintain this children's toy.
	Step2 Double Showers Splash Water Table: Assembly & Safety Guide (Model 421500) Comprehensive assembly instructions, safety warnings, and care guide for the Step2 Double Showers Splash Water Table (Model 421500). Includes details on adult supervision, cleaning, and product specifications.
	Step2 Double Showers Splash Water Table Assembly and Safety Guide Detailed assembly instructions, safety warnings, and usage guidelines for the Step2 Double Showers Splash Water Table. Includes cleaning, disposal, and inspection tips for safe play.
	Step2 Duck Pond Water Table Assembly and Safety Instructions Comprehensive guide for the Step2 Duck Pond Water Table (Model 8427), including assembly steps, safety warnings, cleaning, and disposal information.
	Step2 Rain Showers & Unicorns Water Table - Assembly and Safety Guide Comprehensive guide for the Step2 Rain Showers & Unicorns Water Table (Model 4872), including safety warnings, cleaning instructions, and detailed assembly steps for this engaging children's water play toy.
	Step2 Duck Pond Water Table 8427 Assembly and Safety Guide Official assembly instructions and safety guidelines for the Step2 Duck Pond Water Table (Model 8427). Learn how to safely set up, clean, and maintain this children's water play table.
	Step2 Rushing Rapids Water Table Assembly and Safety Instructions Comprehensive safety, cleaning, and disposal instructions for the Step2 Rushing Rapids Water Table (Model 4216), including assembly guidance and warnings for children.