Assembly Instructions
Contact Us
We're here to help you.
Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, please contact us as soon as possible. Please retain the original packaging and take photos of the packaging and the product.
Warm Tips
- Carefully read these instructions and keep them for future reference.
- Check the parts list and confirm everything's there before starting assembly.
- When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches.
- Don't fully tighten screws until all parts are confirmed in place to avoid misalignment.
Tools & Recommendations
We recommend using hand tools for assembly. ? 2x ? ?
If an electric screwdriver is used, reduce power and torque to avoid damage to the product.
Diagram Description: Visuals show two figures, a wrench, and a screwdriver. Another diagram illustrates a common assembly scenario: confusion with parts, followed by successful assembly with instructions.
Parts List
- Part 1: 2 pcs (Tabletop pieces)
- Part 2: 2 pcs (Side panels)
- Part 3: 2 pcs (Inner support panels)
- Part 4: 2 pcs (Inner support panels)
- Part 5: 2 pcs (Inner support panels)
- Part 6: 2 pcs (Connecting rods)
- Part 7: 2 pcs (Connecting rods)
Diagram Description: An exploded view of the table components, with each part numbered.
Hardware List
- A: 8 pcs + 1 pc (M6x35mm bolts)
- B: 8 pcs + 1 pc (Screws)
- C: 8 pcs + 1 pc (Dowels)
- D: 8 pcs + 1 pc (M8x60mm bolts)
- E: 8 pcs + 1 pc (M8 nuts)
- F: 12 pcs + 1 pc (3.5x14mm screws)
- G: 1 pc (Wrench)
- H: 1 pc (Allen key)
- I: 1 pc (Screwdriver)
- K: 4 pcs (Caps)
- L: 2 pcs (Washers)
- M: 4 pcs + 1 pc (M8 nuts)
Diagram Description: Visuals of all hardware components with their respective labels and quantities.
Assembly Steps
Step 1
Insert dowels (C) and bolts (D) into the designated holes on the tabletop pieces (1).
Diagram Description: Shows inserting hardware C (dowels) and D (M8x60mm bolts) into the pre-drilled holes on the two tabletop pieces (1).
Step 2
Attach the connecting rods (6) to the tabletop pieces (1) using bolts (A). Secure with nuts (M) and washers (L).
Diagram Description: Illustrates attaching the two connecting rods (6) to the underside of the tabletop pieces (1) using bolts (A), washers (L), and nuts (M).
Step 3
Attach the inner support panels (4 and 5) to the tabletop (1) using screws (B) and dowels (C).
Diagram Description: Shows attaching the first set of inner support panels (4 and 5) to the tabletop (1) using screws (B) and dowels (C).
Step 4
Secure the inner support panels (4 and 5) to the tabletop (1) using screws (B), dowels (C), and nuts (E) with washers (G).
Diagram Description: Continues the assembly of inner support panels (4 and 5) by using screws (B), dowels (C), and securing them with nuts (E) and the provided wrench (G).
Step 5
Attach the side panels (2 and 3) to the tabletop (1) using screws (B) and dowels (D).
Diagram Description: Shows attaching the side panels (2 and 3) to the tabletop (1) using screws (B) and dowels (D).
Step 6
Secure the side panels (2 and 3) to the tabletop (1) using screws (B), dowels (C), and nuts (E) with washers (G).
Diagram Description: Continues the assembly of side panels (2 and 3) by using screws (B), dowels (C), and securing them with nuts (E) and the provided wrench (G).
Step 7
Use screws (F) and the screwdriver (I) to further secure the side panels (2 and 3) to the inner supports.
Diagram Description: Shows using screws (F) and a screwdriver (I) to attach the side panels (2, 3) to the inner support panels.
Step 8
Place the caps (K) to cover any exposed screw heads or connection points for a finished look.
Diagram Description: Illustrates placing the caps (K) onto the assembly to cover visible hardware.
Final Assembly
Diagram Description: An image of the fully assembled table, showing the tabletop supported by its legs.
Thank you for your support!
