Assembly Instructions

Contact Us

We're here to help you.

Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, we're here to help. Please retain the original packaging and take photos of the packaging and the product, then contact us as soon as possible.

Warm Tips

1. Carefully read these instructions and keep them for future reference.
2. Check the parts list and confirm everything's there before starting assembly.
3. When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches.
4. Don't fully tighten screws until all parts are confirmed in place to avoid misalignment.

Assembly Guidance

Tools Required: Wrench, Screwdriver. ?

We recommend using hand tools for assembly. If an electric screwdriver is used, reduce power and torque to avoid damage to the product. ⚙️

Install the Anti-Tip Straps

Using the anti-tip straps can reduce the risk of tipping over, but can not eliminate it. ⚠️

Diagram shows a bench secured with anti-tip straps (correct) and a bench tipping over with a person falling (incorrect).

Parts List

Hardware List

Assembly Steps

Step 1

Attach two Part 1 legs and two Part 2 legs to two Part 5 lower shelf rails, one Part 3 support rail, and one Part 4 support rail. Use 8x Hardware A (M6x12mm) and 8x Hardware B (M6x50mm) screws. Tighten screws to 75% completion. ?

Diagram shows the initial frame assembly connecting legs, rails, and cross braces.

Step 2

Attach two Part 6 cross braces to the assembled frame using 4x Hardware A (M6x12mm) screws. Tighten screws to 75% completion. ?

Diagram shows the frame with cross braces being attached.

Step 3

Attach the Part 8 lower shelf to the lower shelf rails. Use 6x Hardware B (M6x50mm) screws and 4x Hardware C (Wooden Dowels). Tighten screws to 75% completion. ?

Diagram shows the lower shelf being fitted into place.

Step 4

Attach the Part 7 tabletop to the top of the leg assemblies. Use 6x Hardware B (M6x50mm) screws. Tighten screws to 100% completion. ✔️

Diagram shows the tabletop being secured to the frame.

Step 5: Install Anti-Tip Straps

Attach one end of the anti-tip strap (Hardware D) to the furniture using screw 'a' (M4x35mm) and bracket 'b'. Attach the other end to the wall using bracket 'c' and appropriate wall anchor (not included). Ensure the strap is taut. ?

Diagram shows the process of attaching the anti-tip strap components to the furniture and wall.