Assembly Instructions
Contact Us
We're here to help you.
Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, we're here to help. Please retain the original packaging and take photos of the packaging and the product, then contact us as soon as possible.
Warm Tips
- Carefully read these instructions and keep them for future reference.
- Check the parts list and confirm everything's there before starting assembly.
- When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches.
- Don't fully tighten screws until all parts are confirmed in place to avoid misalignment.
Assembly Recommendation
We recommend using hand tools for assembly. If an electric screwdriver is used, reduce power and torque to avoid damage to the product.
Parts List
- Part 1: Tabletop (2 pcs)
- Part 2: Side Panel (2 pcs)
- Part 3: Support Panel (2 pcs)
- Part 4: Leg Panel (2 pcs)
- Part 5: Leg Panel (2 pcs)
- Part 6: Crossbar (2 pcs)
- Part 7: Support Brace (2 pcs)
Hardware List
- A: M6x35mm Screw (8 pcs + 1 pc)
- B: Cam Lock (8 pcs + 1 pc)
- C: M8x60mm Screw (8 pcs + 1 pc)
- D: M6x15mm Screw (8 pcs + 1 pc)
- E: M8 Nut (8 pcs + 1 pc)
- F: M3.5x14mm Screw (12 pcs + 1 pc)
- G: Wrench (1 pc) ?
- H: Allen Key (1 pc)
- I: Screwdriver (1 pc) ?
- K: Dowel (4 pcs)
- L: Cam Lock Housing (2 pcs)
- M: M6 Nut (4 pcs + 1 pc)
Assembly Steps
Step 1: Prepare Tabletop
Insert 8x M8x60mm screws (C) and 8x M6x15mm screws (D) into the designated holes on the underside of the two Part 1 (Tabletop) pieces.
Step 2: Attach Crossbars
Attach the two Part 6 (Crossbar) pieces to the underside of the Part 1 (Tabletop) pieces. Secure them using 8x M6x35mm screws (A), 2x Cam Lock Housings (L), and 4x M6 Nuts (M). Insert the Cam Lock Housings (L) into the larger holes and tighten them onto the screws.
Step 3: Assemble First Leg Unit
Take one Part 1 (Tabletop) assembly. Attach one Part 4 (Leg Panel) and one Part 5 (Leg Panel) to the sides of the tabletop. Insert 4x M8x60mm screws (C) and secure them with 4x Cam Locks (B).
Step 4: Secure First Leg Unit
From the inside of the leg structure, insert 4x M8 Nuts (E) onto the protruding M8 screws (C) and tighten them using the Wrench (G). Ensure the leg panels are firmly attached.
Step 5: Attach First Side and Support Panels
Attach one Part 2 (Side Panel) and one Part 3 (Support Panel) to the assembled leg unit. Secure them using 4x Cam Locks (B) and 4x M6x15mm screws (D).
Step 6: Secure First Side and Support Panels
From the inside of the leg structure, insert 4x M8 Nuts (E) onto the protruding M8 screws (C) and tighten them using the Wrench (G). Ensure the side and support panels are firmly attached.
Step 7: Assemble Second Leg and Panel Units
Repeat steps 3 through 6 to assemble the second leg unit and attach the second set of Part 2 (Side Panel) and Part 3 (Support Panel) to it.
Step 8: Final Securing and Dowels
Use 12x M3.5x14mm screws (F) to further secure the panels as indicated in the diagrams. Insert 4x Dowels (K) into the designated holes on the top of the leg structure for additional stability.
Assembled Product
A diagram showing the fully assembled table.
