Assembly Instructions

Contact Us

We're here to help you.

Email: support@yuzhouint.com

Phone: 1-424-206-5666 (Monday to Friday, 8 AM to 8 PM EST)

Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, please retain the original packaging and take photos of the packaging and the product, then contact us as soon as possible.

Warm Tips

1. Carefully read these instructions and keep them for future reference.
2. Check the parts list and confirm everything's there before starting assembly.
3. When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches.
4. Don't fully tighten screws until all parts are confirmed in place to avoid misalignment.

Assembly Recommendations

We recommend using hand tools for assembly. If an electric screwdriver is used, reduce power and torque to avoid damage to the product. [X]

AVOID SCRATCHES

In order to avoid scratching, this furniture should be assembled on a soft surface, such as a rug. [X] [✔️]

Parts List

Part 1: Top Panel (1 pc)

Part 2: Side Panel (2 pcs)

Part 3: Side Panel (2 pcs)

Part 4: Bottom Panel (2 pcs)

Part 5: Support Panel (2 pcs)

Part 6: Support Panel (2 pcs)

Part 7: Support Bar (2 pcs)

Part 8: Support Bar (2 pcs)

Part 9: Support Bar (2 pcs)

Part 10: Support Bar (2 pcs)

Hardware List

• A: ST6x40mm screws (44 pcs)
• B: Ø15x10mm cam locks (44 pcs)
• C: Ø8x35mm pins (20 pcs)
• D: M6x25mm screws (20 pcs)
• E: Small screws (1 pc)
• F: Screws (1 pc)

Installation of Cams and Pins

Read each step carefully before starting. Each step of instruction should be performed in the correct order. If these steps are not followed in sequence, assembly difficulties may occur.

Step 1: Screw the pin into the hole. [A]

Step 2: Set the cams correctly by aligning the head of the cams with the lock pins. [B]

Step 3: Lock the cam by turning the cam head with a screwdriver until it is tightened. Please do not use an electric screwdriver to assemble the unit. [✔️]

Assembly Steps

Step 1:

Attach parts 6 and 5 to part 4 using hardware A and C. Repeat for the second set. [x2]

Step 2:

Attach part 3 to parts 4, 5, and 6 using hardware A. Repeat for the second set. [x2]

Step 3:

Assemble the side panels. Insert cam locks (B) into the designated holes on parts 4, 5, and 6. Align the pins (A) on parts 5 and 6 with the cam locks. Turn the cam locks to secure. Repeat for the second set. [x2]

Step 4:

Assemble the other side panels. Insert cam locks (B) into the designated holes on parts 3, 5, and 4. Align the pins (A) on parts 3 and 5 with the cam locks. Turn the cam locks to secure. Repeat for the second set. [x2]

Step 5:

Attach support bars 2 and 7 to the assembled side panels using hardware A and C. Repeat for the second set. [x2]

Step 6:

Secure the support bars. Insert cam locks (B) into the designated holes on part 7. Align the pins (A) on part 2 with the cam locks. Turn the cam locks to secure. Repeat for the second set. [x2]

Step 7:

Attach the remaining support bars. Insert cam locks (B) into the designated holes on part 2. Align the pins (A) on part 7 with the cam locks. Turn the cam locks to secure. Repeat for the second set. [x2]

Step 8:

Attach the bottom support bars. Secure parts 5, 6, 9, and 10 to the main structure using hardware D.

Step 9:

Attach the top support bars. Secure parts 8 and 2 to the main structure using hardware D.

Step 10:

Attach the top panel. Insert pins (A) into the top panel (1). Align the top panel with the assembled structure and secure using the pins.

Step 11:

Complete the assembly by attaching the top panel (1) to the main structure.

Step 12:

Final check of the assembled coffee table.

Step 13:

Secure the top panel. Insert cam locks (B) into the designated holes on the main structure. Align the pins (A) on the top panel with the cam locks. Turn the cam locks to secure.

Step 14:

The coffee table is now fully assembled.

Thank you for your support!