Televes NanoKom (LTE700 – Second Digital Dividend) Mast Amplifier
The NanoKom LTE700 is a mast amplifier designed for boosting and mixing terrestrial and satellite TV signals received from various antennas. It features three inputs: UHF signals are amplified, while VHF and IF (SAT) signals are mixed. The device includes a DC power pass-through to the satellite input for LNB power supply.
Key Features:
- Equipped with "USOS" (User Selectable Output Signal) technology, allowing users to select the desired output level, with automatic adjustment to input signal variations.
- Separate amplification and very low noise figure.
- Ultra-reduced dimensions and ergonomic design.
- EasyF connection system.
- 12 - 24V power supply.
- Fully automated production with rigorous quality control.
- High-shielding die-cast (Zamak) housing.
- LTE filter to prevent interference from mobile phone bands.
- ON/OFF switch for DC pass-through to the UHF input for BOSS system power.
- Easy installation with a clamp included for mast mounting.
- Durable ABS plastic housing for outdoor installation (orange color).
EasyF Connection System - Easy and Quick Installation
EasyF is an innovative connection system for the inner conductor (core) of coaxial cables. The core is inserted directly into the device, increasing connection reliability. By eliminating F connectors, device dimensions are reduced, and two cables can be secured with a single screw.
- Time saving: Faster installation, no need to strip connectors onto coaxial cables. Avoids the process of screwing/unscrewing connectors onto the device, which can be difficult due to limited space.
- Reliable connection: A collar secures the cable, preventing it from loosening.
- Cost saving: Installation does not require additional F or IEC connectors.
- Space optimization: Inputs and outputs are on the same side of the device, avoiding cable bending and facilitating installation.
Installation Steps:
- Unscrew the splitter cover to access the connection.
- Insert the prepared coaxial cable.
- Close and screw the cover.
EasyF System Reliability
With EasyF, coaxial cable connection to the device is made via an automated system that inserts the cable core into the contact, eliminating the need for soldering.
- Longer device lifespan: Elimination of soldered joints extends device life.
- Reduced failure rate: Minimizes failures typically caused by cold soldering.
- Optimized electromagnetic performance at high frequencies.
- Environmental commitment: No pollution from welding processes and reduced power consumption in production.
Technical Specifications: Ref. 561621
| Parameter | VHF | UHF | SAT |
| Frequency Range | 47 - 254 MHz | 470 - 694 MHz | 950 - 2150 MHz |
| Gain | -1.5 dB | 24 dB | -2.5 dB |
| Output Level DIN45004B | 85 dBμV | 104 dBμV | 94 dBμV |
| Output Level EN50083 | 88 dBμV | 111 dBμV | 95 dBμV |
| Output Level 10Ch DVB-T | 86 dBμV | 104 dBμV | 94 dBμV |
| Noise Figure | 1.5 dB | 3 dB | 3 dB |
| Number of Inputs | 1 | 1 | 1 |
| Inputs/Bands | VHF | UHF | SAT |
| Max. current at input | 3 mA | 40 mA | 300 mA |
| Max. Current for LNB | - | - | - |
| Supply Voltage | 12 - 24 Vdc | - | - |
| Current Consumption | 50 mA | - | - |
| Protection Rating (IP) | 23 | - | - |
| Operating Temperature | -5 to 45 °C | - | - |
Product Information:
- Part Number: 561621
- EAN13: 8424450203224
- Color: Orange
- Packaging: 1 unit per box, 10 units per carton.
- Physical Dimensions: Width: 88.00 mm, Height: 79.00 mm, Depth: 42.00 mm.
- Gross Weight: 200.00 g.
- Product Gross Weight: 220.00 g.
- RED compliant
For more information, visit: https://www.televes.com
