SMÅGÖRA Shelf Unit Assembly Instructions

Important Safety Information

⚠️ WARNING! Furniture tip-over can cause serious injury or death.

To prevent tip-over, this furniture MUST be used with the wall attachment device(s) provided.

The supplied screws and plugs are suitable for most solid and hollow walls. For solid wood, use screws without plugs. Always use screws and plugs appropriate for your specific wall type. If you are uncertain, seek professional advice.

Read and follow each step of the instructions carefully.

Safety warnings are provided in multiple languages within this document.

Parts Included

• 18x Dowels (101345)
• 4x Springs (107716)
• 18x Cam Lock Screws (118331)
• 18x Cam Locks (119252)
• 4x Feet/Base Protectors (122628)
• 2x Wall Mounting Brackets (115753)
• 2x Wall Mounting Bracket Holders (103693)
• 2x Changing Table Top Support Panels (115754)
• 1x Decorative Front Panel/Plinth
• 2x Screws for Decorative Front Panel (110646)

Tools Required (Not Included)

• ? Screwdriver (Phillips head)
• ? Screwdriver (Flat head)
• ? Hammer
• ? Level

Assembly Instructions

Step 1: Prepare Panels

Insert 16x cam lock screws (118331) into the main panels.

Step 2: Assemble Base and Sides

Insert 8x dowels (101345) into side panels. Attach side panels to the base panel.

Step 3: Attach Shelves

Insert 8x dowels (101345) into shelf panels. Attach shelves between side panels.

Step 4: Secure Shelves

Use 8x cam locks (119252) to secure the shelves to the side panels.

Step 5: Attach Back Panel

Attach the back panel to the rear of the unit.

Step 6: Insert Shelves

Place remaining shelves into position.

Step 7: Secure Top Panel

Use 8x cam locks (119252) to secure the top panel to the side panels.

Step 8: Attach Feet

Attach 4x feet/base protectors (122628) to the bottom corners.

Step 9: Attach Wall Mounting Brackets (Shelf Unit)

Attach 2x wall mounting brackets (115753) to the top rear of the shelf unit.

Step 10: Attach Decorative Front Panel

Attach the decorative front panel using 2x screws (110646).

Optional: Convert to Changing Table

The SMÅGÖRA unit can be converted into a changing table.

Step 11: Attach Changing Table Top Supports

Attach 2x changing table top support panels (115754) to the top of the unit.

Step 12: Secure Changing Table Top

Attach the main changing table top surface.

Step 13: Attach Wall Mounting Brackets (Changing Table Unit)

Attach 2x wall mounting brackets (115753) to the top rear of the changing table unit.

Step 14: Attach Safety Barriers

Attach the side safety barrier panels.

Step 15: Secure Changing Table Components

Use springs (107716) and bracket holders (103693) to secure components as shown.

Step 16: Attach Changing Mat Support

Attach the support for the changing mat.

Step 17-19: Final Adjustments

Complete assembly, ensuring all parts are securely fastened and aligned. Pay attention to final adjustments for the changing mat support and barriers.

⚠️ Always ensure the unit is securely fastened to the wall before use, especially when configured as a changing table.

Final Notes

Periodically check and re-tighten all fittings.