SMÅGÖRA Storage Unit
by IKEA
Safety First: Prevent Tip-Over
⚠️ WARNING: Furniture tip-over can cause serious injury or death. To prevent tip-over, this furniture MUST be used with the provided wall attachment device(s).
Ensure you use screws and plugs suitable for your walls. If unsure, seek professional advice. Read and follow each step of the instructions carefully.
Parts Included
- 18x Dowels (101345)
- 2x Wall Brackets (103693)
- 4x Springs (107716)
- 18x Screws (118331)
- 18x Cam Locks (119252)
- 4x Foot Pads (128978)
- 2x Corner Brackets (122628)
- 2x Back Panel Connectors (115753)
- 2x Side Panels (115754)
- 2x Shelves (110646)
Assembly Instructions
Step 1: Assemble the Storage Unit Frame
Connect the side panels (115754) to the base and top panels using dowels (101345) and screws (118331). Attach the back panels using screws (101345). Insert the shelves (110646) using dowels (101345) and secure them with cam locks (119252).
Step 2: Attach Wall Mounting Brackets to Unit
Screw the wall brackets (103693) onto the back of the assembled unit.
Step 3: Mount Unit to Wall
This is the most critical safety step to prevent tip-over. Hold the assembled unit against the wall at the desired location. Mark the wall through the holes in the wall brackets (103693). Remove the unit from the wall. Drill holes in the wall at the marked locations. Insert wall plugs suitable for your wall type (these are not included and must be purchased separately). Reposition the unit against the wall. Securely fasten the unit to the wall by driving screws (118331) through the wall brackets into the wall plugs. Ensure the unit is firmly attached and stable.
Step 4: Attach Changing Surface
Place the changing surface panel onto the top of the unit.
Step 5: Secure Changing Surface
Secure the changing surface to the unit using the provided hardware, such as screws (101345) and cam locks (119252).
Step 6: Apply Corner Protectors
For child safety, attach the corner protectors (128978) firmly to the corners of the changing surface.