FJÄLLBO Shelving Unit

By IKEA

Important Safety Information

⚠️ WARNING!

Serious or fatal crushing injuries can occur from furniture tip-over. To prevent tip-over, this furniture must be used with the wall attachment device(s) provided.

Screws and plugs for the wall are not included. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.

Parts List

4x Part 122158 (Leveling Feet)
28x Part 107616 (Screws)
4x Part 152497 (Screws)
12x Part 152527 (Screws)
12x Part 152526 (Screws)

Assembly Instructions

Step 1

Attach the side frames to the top and bottom horizontal bars. Insert screws (part 107616) into the designated holes and tighten.

Step 2

Slide the mesh shelves into the frame slots. Ensure they are properly seated.

Step 3

Secure the shelves using screws (part 107616). Insert 3 screws per shelf into the frame.

Step 4

Continue sliding the mesh shelves into the frame slots.

Step 5

Secure the shelves using screws (part 107616). Insert 3 screws per shelf into the frame.

Step 6

Attach the side support brackets to the frame using screws (part 107616).

Step 7

Attach the remaining side support brackets to the frame using screws (part 107616) and part 152526 screws.

Step 8

Attach the leveling feet (part 122158) to the bottom of the unit. Screw them in by hand.

Step 9

Prepare for wall attachment. Position the unit against the wall. Mark the wall through the pre-drilled holes in the unit's frame or attached brackets.

Incorrect wall attachment: [X symbol]

Correct wall attachment: [✓ symbol]

Step 10

Attach the wall mounting bracket to the unit's frame using screws (part 152497).

Step 11

Place the top panel onto the assembled frame. Ensure it aligns with the pre-drilled holes.

Step 12

Secure the top panel to the frame using screws (part 107616).

Step 13

Attach the final wall securing bracket to the unit using screws (part 107616).

Step 14

Adjust the leveling feet (part 122158) to ensure the unit is stable and level on the floor.

Step 15

Secure the unit to the wall using appropriate wall fixings (not included) through the attached brackets.

	IKEA BAGGEBO Storage Unit Assembly Instructions and Safety Guide Comprehensive assembly instructions and critical safety warnings for the IKEA BAGGEBO storage unit, emphasizing the importance of wall anchoring to prevent tip-over accidents. Includes multilingual safety information.
	IKEA MUSKAN Shelf Unit Assembly Instructions Comprehensive assembly guide for the IKEA MUSKAN shelf unit, featuring step-by-step instructions, parts identification, and crucial safety information regarding furniture tip-over prevention and wall anchoring.
	VESKEN Shelf Unit Assembly and Safety Instructions Comprehensive guide for assembling the IKEA VESKEN shelf unit, including crucial safety information on preventing furniture tip-over with wall attachment instructions.
	IKEA KALLAX Shelf Unit Assembly Instructions Comprehensive assembly guide for the IKEA KALLAX shelf unit, including safety warnings and step-by-step instructions for building and securely mounting the furniture to a wall.
	RÅGRUND Shelving Unit - Assembly Instructions and Safety Warnings Comprehensive assembly guide and critical safety information for the IKEA RÅGRUND shelving unit. Includes instructions on installing the anti-tip device to prevent furniture tipover accidents.
	EKET Assembly Instructions and Safety Guide \| IKEA Detailed assembly instructions and essential safety information for the IKEA EKET shelving unit. Learn how to safely build, install, and secure your EKET furniture to prevent tip-over accidents.
	IKEA BAGGEBO Shelving Unit Assembly Instructions and Safety Guide Official assembly instructions and safety information for the IKEA BAGGEBO shelving unit. Learn how to safely assemble and secure your furniture to prevent tip-over accidents.
	IKEA SMÅGÖRA Shelf Unit Assembly Instructions & Safety Guide Comprehensive assembly instructions for the IKEA SMÅGÖRA shelf unit. This guide details how to safely build and install the furniture, including essential tip-over prevention measures and optional conversion to a changing table.