MACKAPÄR Storage Unit
Safety First: Preventing Tip-Over
WARNING! Serious or fatal crushing injuries can occur from furniture falling down. To prevent this furniture from falling down, it must be used with the wall attachment device(s) provided.
Important Note: Screws and plugs for the wall are NOT included. You must assess the suitability of your wall to ensure it will withstand the forces generated. Use screws and plugs suitable for your specific walls and the intended load. If you are uncertain, seek professional advice.
Always read and follow each step of the instruction carefully.
Included Components
The following components are included in the package:
- 4x Cylindrical metal tubes (Part #153359)
- 4x Large head screws (Part #153807)
- 2x Plastic caps/covers
- 5x Small screws (Part #10090520)
- 5x Small screws (Part #10090521)
Assembly Instructions
Step 1: Prepare Frame
Take the two main frame pieces. Insert the four cylindrical metal tubes (153359) into the designated holes on the frame pieces. Ensure they are fully seated.
Step 2: Attach Mesh Panels to Frame
Connect the two mesh panels to the main frame. The diagram shows clips being used to secure the mesh panels to the frame's structure.
Step 3: Install Support Bars
Attach the horizontal support bars to the frame using the small screws (10090520 and 10090521). Five screws are used in total for this step.
Step 4: Secure Mesh to Support Bars
Fasten the mesh panels to the newly installed horizontal support bars. Screws are inserted through the mesh into the bars.
Step 5: Final Panel Securing
Insert the four large-headed screws (153807) through the frame and into the mesh panels to provide additional stability and secure the panels.
Step 6: Wall Mounting (Crucial Safety Step)
Position the assembled unit against the wall. This step is critical for safety. Use appropriate wall fixings (screws and plugs, NOT included) that are suitable for your wall type and the intended load (unit weight plus contents). The diagram illustrates two people holding the unit against the wall, indicating the points for wall attachment. Ensure the unit is securely fastened to the wall to prevent tipping and potential injury.
Care and Cleaning
Wipe clean with a cloth damped in a mild cleaner.
Wipe dry with a clean cloth.
