Carina 6mm Sliding Door Shower Enclosure

Congratulations on your purchase

Thank you for choosing Better Bathrooms. We are dedicated to providing high-quality bathroom products at affordable prices. As one of the UK's largest independent bathroom stores, we have received numerous awards, including recognition from The Sunday Times Fast Track 100.

We hope your new product exceeds your expectations. Should you encounter any issues, please log in to your account and contact our customer services team via your self-serve portal at betterbathrooms.com/CustomerAccount/Login, or contact us through betterbathrooms.com/content/contact-us.

Important Information

• Please read these instructions thoroughly and retain them for future reference.
• Always check for pipes and cables before drilling.
• Inspect the product for damage before installation. Claims for damage reported after installation will not be covered.
• Multi-person assembly is recommended.
• Tools are required for installation.
• We recommend using professional tradespeople for installation.

Technical Drawing and Component Listing

The following diagrams illustrate the components and assembly process. Please refer to the component list for part identification.

Component List:

• 01: Caps (9 Pcs)
• 02: Screw ST3.5*9 (6 Pcs)
• 03: Profile (1 Pc)
• 04: Profile (1 Pc)
• 05: Screw ST4*2.35 (6 Pcs)
• 06: Profile (1 Pc)
• 07: Profile (1 Pc)
• 08: Glass Panel (1 Pc)
• 09: Handle (1 Pc)
• 10: Profile (1 Pc)
• 11: Rollers (2 Pcs)
• 12: Profile (1 Pc)
• 13: Rollers (2 Pcs)
• 14: Rail (2 Pcs)
• 15: Glass Panel (1 Pc)
• 16: Profile (1 Pc)
• 17: Profile (1 Pc)

Safety Notice

Before drilling into walls, ensure there are no hidden electrical wires, cables, or water supply pipes. Always wear protective equipment, such as safety glasses and hearing protection, when using power tools.

Installation Instructions

Refer to the following steps for installation. Ensure all measurements are accurate.

Step 1: Wall Mounting

Attach the wall profile (17) to the wall using appropriate fixings. Ensure it is level.

Step 2: Attaching Rails

Attach the top and bottom rails (14) to the glass panels (15 and 08). Ensure the rollers (11 and 13) are correctly oriented for sliding.

Diagram shows attaching rollers to rails and sliding the glass panels into place, ensuring correct alignment.

Step 3: Securing Glass Panels

Slide the glass panels into the respective profiles. Ensure they are securely seated in the top and bottom tracks.

Diagram illustrates sliding the glass panels into the frame and checking for proper fit.

Step 4: Adjusting Rollers

Adjust the top rollers using the provided screws to ensure smooth sliding action and proper sealing when the door is closed.

Diagram shows adjusting the top roller with a screwdriver to fine-tune the door's movement.

Step 5: Final Adjustments

Ensure all components are securely fastened and the door operates smoothly. Check the alignment and sealing.

Diagrams show final checks and adjustments, including the use of screws to adjust roller height and ensure the door closes correctly.

Step 6: Attaching Handle

Attach the handle (09) to the glass panel (08) using the provided screws.

Diagram shows attaching the handle to the glass panel.

Step 7: Final Check

Perform a final check of all fittings and the operation of the sliding door.

Diagram shows the completed installation with the door in place.

Care Instructions

• Do not use the shower enclosure within 24 hours of assembly to allow any sealants to cure.
• Clean the shower enclosure with a cloth soaked in neutral detergent soapy water.
• Do not use sharp tools such as blades for cleaning.
• Avoid strong detergents, alcohol, or abrasive cleaning substances.
• For stubborn stains, a low concentration of vinegar can be used, but it must be rinsed thoroughly with clean water afterwards.