Congratulations on your purchase
Welcome to our growing gang of savvy shoppers. We're on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day.
As one of the UK's largest independent bathroom stores, we've received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However, should any problems occur, please:
- Log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
- Contact us via betterbathrooms.com/content/contact-us
Important information
- Please read these instructions thoroughly and retain for future reference
- Always check for pipes and cables before drilling
CAUTION
- To prevent leaks, silicone must be applied on the outside of the shower and not on the inside
- Read all instructions carefully before starting the installation
- Save this manual for future reference
Contents
- PART LIST: PAGE 04-05
- PREPARATION & TOOL REQUIRED: PAGE 06
- INSTALLATION: PAGE 07
- CONTINUE: PAGE 08
Parts List
Shower Enclosure Components
| NO | Qty | Description |
|---|---|---|
| 1 | 2 | Profile cap L/R |
| 2 | 2 | Wall profile |
| 3 | 6 | Screw ST4x30 |
| 4 | 1 | Moving door |
| 5 | 1 | Handle |
| 6 | 12 | Screw cap |
| 7 | 6 | Wall anchor |
| 8 | 6 | Screw M4x10 |
Side Panel Components
| NO | Qty | Description |
|---|---|---|
| SP1 | 2 | Profile cap L/R |
| SP2 | 1 | Assembled framing side panel |
| SP3 | 3 | Screw cap |
| SP4 | 3 | Screw ST4x10 |
Preparation
Ensure the wall is smooth and ready for installation. Check for any hidden pipes or cables before drilling.
Tools Required
- Drill ?️
- Measuring Tape ?
- Silicone Gun ?
- Precision Knife ?
- Level ?
- Screwdriver ?
- Mallet ?
- Set Square ?
- Pencil ✏️
- Drill Bits (1/8", 3/16", 1/4")
- Masonry Drill Bit
- Screws
Installation
Step A01: Measurement
Determine the required width 'X' for the enclosure based on the size. For size 800, X is 740-780mm. For size 900, X is 840-880mm.
Step A02: Initial Wall Mounting
- Mark the position for the wall profile using a level.
- Drill holes of approximately 6mm depth.
- Insert wall anchors (7) into the drilled holes.
- Attach the wall profile (2) using screws (8).
Step A03: Attaching Profiles
- Attach the profile caps (1) to the wall profiles.
- Secure the moving door (4) to the frame.
- Attach the handle (5) to the door.
Step A04: Aligning and Securing
- Adjust the door position ensuring a gap of 0-20mm from the inside edge.
- Ensure the door is level and secure it using the provided screws (3).
Step A05: Final Adjustments
- Check the alignment of the door and frame.
- Attach the side panel (SP2) to the frame using screws (SP4).
- Secure the side panel using screw caps (SP3).
Step A06: Sealing and Curing
- Apply silicone sealant to the outside edges of the enclosure for waterproofing.
- Allow 24 hours for the silicone to cure before use.
Step B01: Measurement
Determine the required width 'X' and depth 'Y' for the enclosure based on the size. For size 800, X is 741-781mm and Y is 770-790mm. For size 900, X is 841-881mm and Y is 870-890mm.
Step B02: Initial Wall Mounting
- Mark the position for the wall profile using a level.
- Drill holes of approximately 6mm depth.
- Apply silicone sealant to the wall profile before mounting.
- Attach the wall profile (2) using screws (3).
Step B03: Attaching Side Panel
- Attach the side panel (SP2) to the frame.
- Secure the side panel using screws (4).
Step B04: Alignment
- Align the side panel (SP2) with the frame, ensuring A=B and C=D for proper fit.
- Attach the frame using screws (4).
Step B05: Final Assembly
- Attach the profile caps (1) to the frame.
- Secure the side panel using screws (SP4).
- Attach the handle using screws (SP3).
- Ensure all components are securely fastened with screws (6) and caps (5).
Step B06: Sealing and Curing
- Apply silicone sealant to the outside edges of the enclosure for waterproofing.
- Allow 24 hours for the silicone to cure before use.
Maintenance & Cleaning
Use a PH-neutral cleaning agent to maintain and clean the surface of your product. Do not use alkaline, solvent, acid, or chloric or scrubbing agents.
To maintain the surface of your product, wipe with a clean damp cloth and wipe dry. Do not use any abrasive cleaning agents or materials. If any harsh chemicals come into contact with the surface of the product, rinse and wipe clean immediately.
For more information
- Visit betterbathrooms.com
- Email customerservices@buyitdirect.co.uk
- Call 03303903062
- Write to Trident Business Park, Neptune Way, Huddersfield, HD2 1UA
better bathrooms
Part of the BuyltDirect Group
