Ecotap Duo Wallcharger

A brand of Legrand

Product Overview

An image shows the Ecotap Duo Wallcharger, a vertical white charging unit, mounted on a wall. To the left, the rear section of a white electric car is visible.

The Duo Wallcharger is a product from Ecotap, a brand of Legrand.

Contact information: www.ecotap.nl, info@ecotap.nl

General Characteristics

CharacteristicDetails
Reference Number55161800 / 55161100 / 55161600 / 55321800 / 55321100 / 55321600 / 55081800 / 55081100 / 55081600 / 55081602 / 55081102 / 55081801 / 55320014 / 55320013 / 55320012 / 55321604
Reference Number (Calibration)55451800 / 55451100 / 55451600
Reference Number (FR)55483702 / 55483703
Dimensions (H x W x D) mm800 x 220 x 200
Housing MaterialSteel 2.2 mm
Standard ColorBody: Ral 6018 / Shield: Ral 9016 for 55161800 / 55321800 / 55451800 / 55081800 / 55081801 / 55320014 / 55320013 / 55160012
Body: Ral 7011 / Shield: Ral 9016 for 55161100 / 55321100 / 55451100 / 55483702 / 55081100 / 55483703 / 55081102
Body: Ral 9016 / Shield: Ral 9016 for 55161600 / 55321600 / 55451600 / 55081600 / 55081602 / 55321604
Steel TreatmentAnti-corrosion (KTL) and powder coating
Weight (kg)21kg for 55451800 / 55451100 / 55451600 / 55483702 / 55081800 / 55081100 / 55081600 / 55483703 / 55081602 / 55081102 / 55081801
25kg for 55161800 / 55161100 / 55161600 / 55321800 / 55321100 / 55321600 / 55320014 / 55320013 / 55160012 / 553216048
Number of Charging Points2
ConnectorType 2, Type 2 + Type E/F for 55483702 / 55483703
CableType 2

Electrical Characteristics

CharacteristicDetails
Output Power per Charging Point0 to 22 kW for 55483702 / 55483703 / 55451800 / 55451100 / 55451600 / 55081800 / 55081801 / 55081100 / 55081101 / 55081600 / 55081601 / 55321800 / 55321801 / 55321100 / 55321101 / 55321600 / 55321601 / 55320013 / 55320014
0 to 11 kW for 55161800 / 55161801 / 55161100 / 55161101 / 55161600 / 55161601 / 55160011 / 55160012
Operating Voltage (Ue) / Rated Current (In A) for ChargerSingle-phase cabling, Phase + N 230V~ from 0 to 63A (specified at 20°C)
Three-phase cabling, 3 phases + N 400V~ from 0 to 63A (specified at 20°C)
Operating Voltage (Ue) / Rated Current (In A) per Charging PointSingle-phase cabling, Phase + N 230V~ from 0 to 32A (specified at 20°C)
Three-phase cabling, 3 phases + N 400V~ from 0 to 32A (specified at 20°C)
Impulse Voltage (Uimp)4kV
Insulation Voltage (Ui)230V single-phase, 500V three-phase
Frequency (fn)50Hz/60Hz
Nominal Voltage1 phase + N: 230V - 3 phases + N: 400V
Voltage Tolerance (V) regardless of vehicle requirements195V - 265V
Integrated Safety System on Charging StationFuse type gG 63A
Integrated Safety System per Charging PointFuse Type gG 32A + RCD 40A 30mA Type B
Conditional Short-Circuit Current100kA IEC/EN 60898-1
Permissible Thermal Short-Circuit Current16 000 A²s
Connection to Power GridPhase/Neutral, rigid cable, 2.5 to 16 mm², screw terminals H07 V R/U
Earth, rigid cable, 2.5 to 25 mm², screw terminals H07 V R/U
Charging TypeMode 3 charging terminal equipped with a locking system for Mode 3

Vehicle Connection Details

Connection TypeDetails
Vehicle Connection Mode 3 Connector (55451800 / 55451100 / 55451600 / 55483702 / 55081800 / 55081100 / 55081600 / 55483703 / 55081602 / 55081102 / 55081801)Type 2 3P+N (single-phase compatible) with pilots compliant with IEC 62191-1 and IEC 62196-2. Use only a manufacturer-approved plug with silver-plated contacts. Use of extension cords and adapters is prohibited.
Vehicle Connection Mode 2 Connector (55483702 / 55483703)Type E/F household 2P+E (16A-250V) depending on local regulations. Use of extension cords and adapters prohibited.
Vehicle Connection Mode 3 Attached Cable Connector (55161800 / 55161100 / 55161600 / 55321800 / 55321100 / 55321600 / 55320014 / 55320013 / 55160012 / 55321604)Type 2 3P+N (single-phase compatible) with pilots compliant with IEC 62191-1 and IEC 62196-2. Use of extension and adapter prohibited.
55161800 / 55161100 / 55161600: 4m coiled 3x16A
55160012: 4m straight 3x16A
55321604: 4m straight 3x32A
55321800 / 55321100 / 55321600 / 55320014 / 55320013: 8m straight 3x32A
Phase Rotation on Channel 2 (right side)In case of single-phase cabling (Ph+N) on the power source. Channel 2 cannot start charging sessions until the phase rotation between the contactor and the socket is manually corrected.
AC MetersMID-certified, Class B according to EN 50470-1, -3
Back Office ProtocolOCPP 1.6 Json
PositioningGPS
Ethernet ConnectivityRJ45 connector for 55451800 / 55451100 / 55451600 / 55483703 / 55081602 / 55081102 / 55081801 / 55320014 / 55160012

Environment

CharacteristicDetails
Operating Temperature-25°C / +50°C
Storage Temperature-25°C / +80°C
Relative Humidity0 to 90% without condensation
Protection ClassIP 54 (IEC 60529), IK 10 (EN 62262) Connected or not
Noise Level< 40 dBA / 1m
Product StandardsIEC 61851-1, IEC TS 61439-7 (AEVCS)

Installation and Safety

CharacteristicDetails
InstallationIndoors or outdoors, in a restricted-access zone, intended for use by ordinary persons (DBO), wall mounting, pollution degree 3, TNS, TT, compatible earthing system. With an IT earthing system, this can be locally modified by adding an isolation transformer.
Electrical SafetyClass 1 IEC 61140
Electromagnetic Compatibility
European StandardsLow Voltage Directive 2014 / 35EU / EMC Directive: 2014 / 30 / EU
Radio Technology TypeGSM 2G/3G/4G, GPRS, RFID
Suitable Charging CardsMifare, Ntag and iCODE SLI cards

PDF preview unavailable. Download the PDF instead.

Duo-Wallcharger-specs-NL Adobe PDF Library 17.0 Adobe InDesign 20.4 (Windows)

Related Documents

Preview Ecotap Duo Wallcharger: Technical Specifications and Features
Detailed technical specifications for the Ecotap Duo Wallcharger, covering general characteristics, electrical features, environmental conditions, and safety standards. Learn about its power output, voltage, connectivity, and more.
Preview Ecotap Duo Wallcharger Technical Specifications
Comprehensive technical specifications for the Ecotap Duo Wallcharger, an electric vehicle charging station from Ecotap B.V., detailing electrical characteristics, general features, environmental conditions, and compliance standards.
Preview Ecotap Wallcharger Duo User Manual and Installation Guide
This manual provides detailed information on the installation, operation, safety, maintenance, and technical specifications for the Ecotap Wallcharger Duo, a 22kW electric vehicle charging station.
Preview Ecotap Wandlader Duo Technical Specifications
Detailed technical specifications for the Ecotap Wandlader Duo electric vehicle wall charger, including general, electrical, environmental, and EMC properties. Features include Type 2 charging, various power outputs, and connectivity options.
Preview Ecotap Duo Wallcharger FR - Technical Specifications
Detailed technical specifications for the Ecotap Duo Wallcharger FR electric vehicle charging station, including general and electrical characteristics, environmental conditions, and electromagnetic compatibility. Features model numbers 55483702 and 55483703.
Preview Ecotap Duo Wallcharger FR Specifications
Detailed specifications for the Ecotap Duo Wallcharger FR, a dual electric vehicle charging station. Includes general, electrical, environmental, and electromagnetic compatibility characteristics.
Preview Ecotap Duo Wallcharger FR Specifications
Technical specifications for the Ecotap Duo Wallcharger FR, a dual electric vehicle charging station with Mode 3 and Mode 2 charging capabilities, detailing electrical and environmental characteristics.
Preview Ecotap Duo Wide XL EV Charger - Technical Specifications
Detailed technical specifications for the Ecotap Duo Wide XL electric vehicle charging station, including general properties, electrical characteristics, environmental factors, and electromagnetic compatibility. Features include Type 2 sockets, up to 22 kW output, and robust construction.