Product Manual
The MS450-NTC is a high-performance industrial endoscope featuring a 4.5-inch high-definition color screen. It is ergonomically designed for one-handed operation. The device supports snapshot and recording functions, saving photos and videos to a TF memory card (Micro-SD card). It is equipped with LED-assisted illumination and a small-diameter HD camera utilizing a high-sensitivity chip for low-light performance. The camera probe is interchangeable, allowing connection to probes of different sizes, dimensions, angles, or focal lengths.
Warning: This product is an industrial endoscope camera and is not intended for medical use or human examination.
Safety and Maintenance
- DO NOT violently hit the camera probe or imprudently pull the cable.
- When used in environments with sharp objects, be cautious to prevent the probe's waterproof protective layer from being scratched.
- The camera probe materials are not resistant to high temperatures. Ensure engine temperatures are normal when checking vehicle engines.
- This product is not suitable for individuals with limited physical, sensory, or mental capabilities.
- DO NOT allow children to touch or operate this device.
- If the device is damaged, DO NOT disassemble it yourself. Contact the seller or agent for repair services.
Battery Description
- Please use a 5V household charger that meets safety regulations to charge this device.
- If the device is not used for a long time, ensure it is charged at least once every 3 months to prevent irreparable damage from excessive battery discharge.
Functions
The device allows for taking photos, video recording, and playback. Press the 'M' button to switch between these modes.
Device Status Indicators:
- TF card status: indicates if a card is inserted or not.
- Date and time: can be modified in the Settings menu.
Device Controls and Ports:
Diagram shows the main unit with numbered controls and ports:
- 1. Camera probe connector.
- 2. Snap button: Take photos or start/end video recording.
- 3. Light control: Adjusts the brightness of the camera's LEDs.
- 4. Down button: Activates 1.5X zoom.
- 5. Up button: Rotates the image 180°.
- 6. Mode button: Switches between photo, video recording, and playback modes.
- 7. Enter button: Confirms selection or freezes the screen.
- 8. Settings button: Enters or exits the settings menu.
- 9. Power button: Press and hold for a few seconds to turn the device ON/OFF.
- 10. TF card slot.
- 11. Charging port (Type-C).
- 12. Camera probe lock: Press this button to unlock and pull out the camera probe.
- 13. Speaker.
- 14. Installation hole for the screen bracket.
- 15. Reset button.
- 16. Microphone.
Take Photos: Press 'M' to switch to photo mode, then press the Snap button to take a photo.
Video Recording: Press 'M' to switch to video recording mode, then press the Snap button to start recording.
Two thumbnail images are displayed, labeled 'Take Photos' and 'Video Recording', showing close-ups of gear teeth, indicating captured visual data.
Instructions
Powering On/Off: Press and hold the Power button for a few seconds to turn the device ON/OFF.
Switching Lenses (for Dual Lens Probes): Diagram shows a button being pressed, followed by a hand pulling out a Type-C plug of the probe from the monitor. This action switches between the front and side lenses.
Connecting Camera Probe: Diagram shows a camera probe being inserted into the monitor's connector. Note: Connect the camera probe before turning on the device. Restart the device if replacing the camera probe.
How to Insert TF Card:
The device is equipped with a TF memory card. Gently press to eject the card.
- Power off the device before inserting the TF card.
- Ensure the correct orientation and front/back sides when inserting the TF card.
- Do not use excessive pressure when inserting or removing the TF card to prevent damage to the card slot structure.
- Photos or videos can only be taken when a TF card is inserted into the device.
Language Settings
The default language is English. The system supports English, Chinese, German, French, Spanish, Italian, Russian, and Japanese.
Setting Path:
- Press the Settings button twice to enter the settings page.
- Select the second item, labeled 'Language'.
- Use the Up and Down buttons to select the desired language.
- Press the Enter button to save your choice.
Copy Photo and Video Files to Computer
Diagram shows two methods for transferring files: 1) A TF card being inserted into a 'Card reader' connected to a computer. 2) A 'Type-c data cable' connecting the device to a computer.
You can use a TF card reader to copy data directly or use a Type-C cable to connect to a computer for copying.
Specification Parameters
Screen
- Screen Type: 4.5-inch HD Display
- Screen Resolution: 854x480 pixels
- Support Probe Resolution: 1.0 Megapixel HD
- Image Capturing Resolution: 1920x1080 pixels
- Video Recording Resolution: 1280x720 pixels
- Ports: Type-C charging port, TF memory card slot
Camera
- Diameter: 5.5mm (or optional)
- Probe Length: Optional
- Resolution: 1.0 Megapixel HD
- Viewing Angle: 70°
- Depth of Field: 30mm-100mm
- Light Source: 6 adjustable high-intensity LEDs
Others
- Operating Temperature: 32°F to 113°F (0°C to 45°C)
- Power Source: 2500mAh Lithium Battery
- Working Time: 3-4 hours
- Charging Time: 3-4 hours
Packaging
- Included: Monitor, camera probe, Type-C charging cable, user manual, screen bracket.
- Accessories: Pick-up hook, magnet, mirror. (Note: 3.9mm probe model does not include accessories).
Customer Service
For any product quality issues, please contact TESLONG Customer Service. We are here to assist you.
Manufacturer Service:
- Email: support@teslong.com | info@teslong.com
- Phone: 1-877-899-8809 (US)
- Hours: Monday-Friday, 8:00 AM - 5:00 PM PST
Regulatory Compliance: FC, CE
Model Information: TESLONG MS450-NTC 202109 V3 3.06.02.000216
