Teslong 6-Inch Inspection Camera

Overview

Features

• 6-inch HD IPS Screen
• LED Camera Lights & LED Flashlight
• Detachable Probe Design
• Supports WiFi Connection
• PD Fast Charging

Applications

• Automotive or diesel repair and maintenance
• Inspection of hard-to-reach or hard-to-see areas or equipment, plumbing, construction & restoration applications
• Scientific education
• Outdoor exploration
• Rescue security

Safety

⚠️ WARNING! Please read all safety warnings and instructions before using this product. Failure to follow these warnings may result in electric shock, fire, or serious injury.

• Keep the tool dry, clean, and free from oil, water, gas, or other materials that may cause corrosion.
• This appliance is not intended for use by people with limited physical, sensory, or mental capabilities.
• This appliance is not intended for medical use. Keep bystanders or children away while operating the tool.

Maintenance

• Keep the camera lens clean.
• Keep the working area clean.
• Charge the device at least once every 3 months if it is left unused for a long time to prevent damage to the battery.

Specifications

Camera Parameters

Display Parameters

* For more probe/cable options please visit the official Teslong website and store: Teslong.com.

NOTICE: Should you need replacement(s) of any other components, please contact our customer service for help.

Functions

The device features a 6-inch screen with control buttons below it. The handle contains additional buttons and ports. Key buttons include:

• Cable Port
• Photo/Video Button: Short press for Photo Taking/Video Recording (Start/End). Long press to switch the camera view (Triple Camera).
• Setting Button: Short press to Enter/Exit setting menu. Hold to delete Photo/Video (Album Menu). Long press to Turn On/Off WiFi connecting.
• Camera Light Button: Adjust the brightness of LED camera lights.
• OK Button: Confirm selection/Video Play/Pause.
• Mode Button: Switch between Photo taking/Video recording/Album.
• Power Button: Hold the button to turn the device on/off.
• UP Button
• Down/Rotate Button
• TF card Slot
• Speaker
• Type-C Port
• LED Flashlight
• Reset Button
• Angle Adjustment Button
• LED Flashlight Button

Using Your Inspection Camera

1. Remove the plastic screen cover before using this device.
2. Connect the cable to the monitor (make sure the camera is connected firmly to prevent noisy image on the screen).
3. Power ON/OFF: Press and hold the Power Button to turn on the device.
4. The device is equipped with a TF memory card (inserted). Please make sure it's installed before use.

How to Insert the TF Card

• Power Off the device first before inserting the TF card.
• Make sure the orientation of the TF card is correct when inserting into the slot.
• Do not use excessive pressure when inserting or removing the TF card from the slot.
• Only take photos or record videos when a TF card is inserted.
• This device requires a Class 10 high-speed TF card; it will not work properly with a Class 4 low-speed card.

Power Button Lighting Instruction

• Device Running: Green LED stay on.
• Charging (Device on): Green/Orange LED flashes.
• Charging (Device off): Orange LED stay on.

UI Instruction

Mode: Press the 'M' button to switch the three modes: Photo taking, Video recording, Album. The screen displays TF card status (inserted/no card) and Battery Status.

Date and time: modify the date and time in the Settings menu.

Switch Between Taking Photos and Video Recording

Press 'M' to switch to "take photo" mode, and press the 'OK' button to take a photo. Press 'M' to switch to "video recording" mode, and press 'OK' to start recording.

In any mode, press the 'OK' button twice to enter the system settings menu. Click the arrow buttons to select and the 'OK' button to save changes. The default language is English, and the system supports English, Chinese, German, French, Spanish, Italian, Russian, and Japanese.

Icon State

• With TF Card
• Charged Up Immediately
• Automatic Alarm When Over 75°C, Power off When Over 85°C
• Solid without Arrows Means: Connected but No Data Transmission.
• Solid with Arrows Means: Connected with Data Transmission.

How to Switch the Camera View (Only for Dual/Triple Lens)

Hold the photo button to switch the view of the Front Camera/Side Camera.

WiFi Connecting

How to Display the Image on Your Phone/Pad/Tablet

1. Use your phone to scan the QR code and download the "Smart Endoscope" app.
2. Open the device WIFI (At this time, the host's WIFI indicator blinks).
3. Connect the WiFi.
4. Run the app.
5. Click the '+' button in the app to set up the device and start using it with your smartphone.
6. Start displaying the image on your phone/pad/tablet.

Note: Photo Taking/Video Recording are only supported by your Phone/PAD/Tablet (not available for the endoscope device) in the WiFi mode. Scan the QR code or enter the activation code printed on the card to remove ads in the app.

Transfer Photo/Video Files to Your Computer

To transfer files to your computer:

• Use a TF card reader to transfer data directly.
• Connect your computer with a Type-C USB cable to transfer files.

▲ Pull out probe camera first before using USB cable.

For charging your device, please use a USB wall charger that supports PD fast charging and the appropriate cable.

If the device crashes, please press the reset button to restore it.

EU Environmental Protection

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

Safety Warnings

Note:

1. Keep away from humid and sun-exposed environments.
2. Avoid contact with sharp objects.
3. Do not use strong detergents or organic solvents to clean the lens; it is recommended to use a soft cloth dampened with water or rubbing alcohol for cleaning.

Warning:

1. Do not pierce the product casing with nails or other sharp objects. Do not strike or step on the product.
2. Avoid using it near fire or in extremely hot conditions.
3. Do not disassemble the product in any way.

Troubleshooting

Customer Service

Please contact Teslong if you have any questions about your product:

• 12-month Warranty
• Lifetime Technical Support
• Email: support@teslong.com
• Phone: 1-877-899-8809 (US) (Mon-Fri, 8:00 AM-5:00 PM PST)
• Website: www.teslong.com
• Social Media: @TeslongInc, @teslongusa

Regulatory Compliance: FC, CE, UKCA, RoHS

© TESLONG NTS600 E0421V1.2