Teslong TS43 Digital Inspection Endoscope

Product Manual

The Teslong TS43 is a high-performance industrial endoscope equipped with a 4.3-inch high-definition color screen. It supports snapshot and recording functions, saving photos and videos to a TF memory card (Micro-SD card). The device features LED-assisted illumination and a small-diameter HD camera with a high-sensitivity chip for optimal performance in low-light conditions.

Warning: This product is an industrial endoscope camera and is not intended for medical use or human examination.

Safety and Maintenance

• Do NOT violently hit the camera probe or imprudently pull the cable.
• When operating in environments with sharp objects, exercise caution to prevent scratching the probe's waterproof protective layer.
• The camera probe materials are not resistant to high temperatures. Ensure that the engine temperature has cooled before inspecting a vehicle engine.
• This product is not suitable for individuals with limited physical, sensory, or mental capabilities.
• Do NOT allow children to operate this device.
• If the device is damaged, do NOT attempt to disassemble it yourself. Contact the seller or agent for repair services.

Battery Description

• Use a 5V household charger that complies with safety regulations for charging.
• The device can be used while charging.
• If the device is not used for an extended period, charge it at least once every 3 months to prevent irreparable damage from excessive battery discharge.

Functions

The device features the following controls:

• ① Camera probe: The endoscope camera.
• ② Up selection button: Used for Zoom.
• Down selection button: Used for Rotate.
• ③ Mode switch button: Switches between three modes: Photo taking, Video recording, and Playback.
• ④ Enter button: Confirms selections or freezes the screen.
• ⑤ Settings button: Enters or exits the settings menu.
• ⑥ Snap button: Takes photos, starts/ends video recording. Press and hold for a few seconds to switch between the front-view and side-view cameras.
• ⑦ Power button: Press and hold to turn the device ON/OFF.
• ⑧ Light control button: Adjusts the LED brightness of the camera.
• ⑨ Charging port: For charging the device.
• ⑩ Reset button: Resets the device.
• ⑪ TF card slot: For inserting a Micro SD card.

Instructions

Turning On/Off

Press and hold the Power button for a few seconds to turn the device ON or OFF.

Charging

Connect the device to a power source using the charging port.

Inserting TF Card

Important:

• Power off the device before inserting the TF card (Micro SD).
• Ensure the TF card is inserted in the correct direction (front and back sides).
• Avoid using excessive force when inserting or removing the TF card to prevent damage to the card slot structure.

Using the Equipment

• Mode Switching: Press the 'M' button to cycle through Photo taking, Video recording, and Playback modes.
• Taking Photos/Recording Video: In Photo taking or Video recording mode, press the 'M' button to take a photo or start/end recording.
• Playback: In Playback mode, press the selection buttons (Up/Down) to navigate through photos or videos. Press the 'M' button to delete selected media.
• TF Card Status: The screen displays whether a TF card is inserted or not.
• Date and Time: Modify the date and time within the Settings menu.

Copying Photo and Video Files

Files can be copied to a computer using either a TF card reader or a Micro USB data cable.

Language Settings

The default language is English. The system supports multiple languages including Simplified Chinese, German, French, Spanish, Italian, Russian, Japanese, Traditional Chinese, Korean, and Portuguese.

Setting Path:

1. Press the "Settings" button to enter the menu.
2. Select "language setting".
3. Use the Up and Down buttons to select the desired language.
4. Press the "OK" button to save changes.

Specifications

Screen

• Display: 4.3-inch HD Display
• Resolution: 480x272 pixels
• Probe Resolution: 1.0 Megapixel HD
• Snapshot Resolution: 1920x1080 pixels
• Video Recording Resolution: 1280x720 pixels
• Ports: Micro charging port, TF memory card slot

Camera

• Diameter: 7.0mm or 8.0mm (optional)
• Resolution: 1.0 Megapixel HD
• Viewing Angle: 75°
• Depth of Field: Front camera: 30mm-80mm; Side camera: 20-60mm
• Light Source: 6 adjustable high-intensity LEDs

Others

• Operating Temperature: 32°F to 113°F (0°C to 45°C)
• Power Source: 2000mAh Lithium Battery
• Max Battery Life: 3.5 hours
• Charging Time: 4 hours

Packaging

• Monitor
• Micro charging cable
• User manual
• Accessories: Pick up hook, magnet