Teslong Inspection Camera User Manual
Model No.: MS450–NTC
Product Manual
The MS450-NTC is a high-performance industrial endoscope featuring a 4.5-inch high-definition color screen. It is ergonomically designed for one-handed operation. The device supports snapshot and recording functions, with photos and videos saved on a TF memory card (Micro-SD card). It is equipped with LED-assisted illumination and a small-diameter HD camera utilizing a high-sensitivity chip for effective performance in low-light conditions.
The camera probe is interchangeable, allowing connection to different probes with varying sizes, dimensions, angles, or focal lengths.
Warning: This product is an industrial endoscope camera and is not intended for medical use or human examination.
Safety and Maintenance
- Do not violently hit the camera probe or imprudently pull the cable. Exercise caution in environments with sharp objects to prevent scratching the probe's waterproof protective layer.
- The camera probe materials are not resistant to high temperatures. Ensure the engine is at normal temperature when inspecting a vehicle engine.
- This product is not suitable for individuals with limited physical, sensory, or mental capabilities.
- Do not allow children to touch or operate this device.
- If the device is damaged, do not attempt to disassemble it yourself. Contact the seller or agent for repair services.
Battery Description
- Please use a 5V household charger that meets safety regulations.
- If the device is not used for a long time, ensure it is charged at least once every 3 months to prevent irreparable damage caused by excessive battery discharge.
Functions
The device offers three modes: Photo, Video Recording, and Playback. Press the "M" button to switch between these modes.
The TF card status (inserted/no card) is displayed on the screen.
The screen displays the date and time, which can be modified in the Settings menu.
Device Interface Overview
The device features a screen displaying the camera feed and status information. The control panel includes:
- 1. Camera probe connector: Port for connecting the camera probe.
- 2. Snap button: Press to take photos or start/end video recording.
- 3. Light control: Adjusts the brightness of the camera's LED lights.
- 4. Navigation buttons: Up/down selection, zoom in, or rotate the view 180°.
- 5. Mode button: Switches between Photo, Video Recording, and Playback modes.
- 6. OK button: Confirms selections or freezes the screen.
- 7. Settings button: Enters or exits the settings menu.
- 8. Power button: Press and hold for a few seconds to turn the device ON/OFF.
Device Ports and Features
External View
The device has the following ports and features:
- 9. TF card slot: For inserting a Micro-SD card.
- 10. Charging port: Type-C port for charging.
- 11. Camera probe lock: Press this button to unlock and pull out the camera probe.
- 12. Speaker: For audio output.
- 13. Installation hole: For screen bracket attachment.
- 14. Reset button: Used to reset the device.
- 15. Microphone: For audio input.
Operating Modes
Take Photos
To take photos, press the "M" button to switch to photo mode, then press the "Snap" button to capture an image.
Video Recording
To record video, press the "M" button to switch to video recording mode, then press the "Snap" button to start recording.
Instructions
Powering On/Off
Press and hold the Power button (⏻) for a few seconds to turn the device ON or OFF.
Lens Switching
Notice: Press the designated button to switch between the front and side lenses, especially when using a dual-lens camera probe.
Resetting the Device
Press the Reset button (?), then pull out the Type-C plug of the probe from the monitor.
Note: Connect the camera probe before turning on the device. Restart the device if you replace the camera probe.
How to Insert TF Card
The device comes with a TF memory card pre-inserted. Gently press the card to eject it.
- Power off the device before inserting or removing the TF card.
- Ensure the TF card is inserted in the correct orientation (front and back sides).
- Avoid excessive pressure when inserting or removing the TF card to prevent damage to the card slot structure.
- Photos and videos can only be taken or recorded when a TF card is inserted.
Language Settings
The default language is English. The system supports English, Chinese, German, French, Spanish, Italian, Russian, and Japanese.
Setting Path:
- Press the Settings button (⚙️) twice to enter the settings page.
- Select the second item, "Language".
- Use the up and down navigation buttons to select your desired language.
- Press the OK button (✔️) to save your selection.
Copy Photo and Video Files to Computer
Data can be copied directly using a TF card reader or by connecting the device to a computer via a Type-C cable.
[Diagram Description: Visual representation showing a TF card reader connected to a memory card, and a laptop connected to the inspection camera via a Type-C data cable, illustrating data transfer methods.]
Specification Parameters
Screen
- Screen: 4.5-inch HD Display
- Screen resolution: 854x480 pixels
- Support probe resolution: 1.0 Megapixel HD
- Image Capturing resolution: 1920x1080 pixels
- Video Recording resolution: 1280x720 pixels
- Ports: Type-C charging port, TF memory card slot
Camera Specifications
| Feature | Single lens | Double lens | Three lens |
|---|---|---|---|
| Diameter | 5.5mm/optional | 8mm | 7.9mm |
| Length | Optional | Optional | Optional |
| Resolving power | 100W Pixel | ||
| Angle | 70° | 70° | 78°±3° |
| Auxiliary lighting | 6 adjustable brightness LED lamps | 6 + 1 adjustable brightness LED lamps | 6 + 1 + 1 LED lights with adjustable brightness |
| Focus Range | Main lens 30–100mm | Main lens 30–80mm Side lens 20–50mm | Main lens 30–100mm Side B lens 20–60mm Side C lens 15–30mm |
Others
- Operating Temperature: 32°F to 113°F (0°C to 45°C)
- Power Source: 2500mAh Lithium Battery
- Working Time: 3-4 hours
- Charging Time: 3-4 hours
Packaging
- Monitor, camera probe, Type-C charging cable, user manual, screen bracket
- Accessories: pick-up hook, magnet, mirror
- (Note: 3.9mm NO accessories)
Customer Service
Please contact Teslong if you have any product quality problems. We are happy to assist you.
- Manufacturer Service
- Email: support@teslong.com | info@teslong.com
- Phone: ? 1-877-899-8809 (US)
- Hours: Monday–Friday 8:00 AM–5:00 PM PST
[Compliance Logos: FC, CE, RoHS, WEEE symbol]
TESLONG MS450-NTC 202109 V1
3.06.02.000216
