TESLONG MS450-NTC Inspection Camera User Manual
Model No.: MS450-NTC
Product Overview
The TESLONG MS450-NTC is a high-performance industrial endoscope camera featuring a 4.5-inch high-definition color screen. It is ergonomically designed for one-handed control. The device supports snapshot and video recording functions, saving media to a TF memory card (Micro-SD card). It is equipped with an LED-assisted illumination system and a small-diameter, high-sensitivity HD camera chip, enabling operation in low-light conditions. The camera probe is interchangeable, allowing connection to different probes with varying sizes, dimensions, angles, or focal lengths.
Warning: This product is an industrial endoscope camera and is not intended for medical use or human examination.
Safety and Maintenance
- Handle the camera probe with care. Avoid violent impacts and do not pull the cable imprudently.
- When using the camera in environments with sharp objects, be cautious to prevent scratching the probe's waterproof protective layer.
- The camera probe materials are not resistant to high temperatures. When inspecting vehicle engines, ensure the engine temperature is normal before use.
- This product is not intended for use by individuals with limited physical, sensory, or mental capabilities.
- DO NOT allow children to touch or operate this device.
- If the device is damaged, DO NOT attempt to disassemble it yourself. Please contact the seller or agent for repair services.
Battery Description
- Use a 5V household charger that meets safety regulations for charging the device.
- For long-term storage, ensure the device is charged at least once every 3 months to prevent irreparable damage caused by excessive battery discharge.
Functions and Operation
The device features several key functions accessible via its buttons:
- Power Button (8): Press and hold for a few seconds to turn the device ON/OFF.
- Mode Selection (5): Press the 'M' button to switch between three modes: Take Photos, Video Recording, and Playback.
- Snap Button (2): Press to take photos or to start/end video recording.
- Light Control (3): Adjust the brightness of the camera's LED lights.
- Navigation Buttons (4, 6): Use the Up/Down buttons for selection, zooming, or rotating the image 180°. The 'OK' button (6) confirms selections or freezes the screen.
- Settings Button (7): Press to enter or exit the settings menu.
- Camera Probe Lock (11): Press this button to unlock and then pull out the camera probe from the monitor.
- TF Card Slot (9): For inserting a TF memory card.
- Charging Port (10): A Type-C port for charging the device.
- Speaker (12): For audio output.
- Reset Button (14): Used for resetting the device.
- Microphone (15): For audio input.
- Screen Bracket Installation Hole (13): For attaching a screen bracket.
Date and Time: The date and time can be modified within the Settings menu.
Dual Lens Operation: When connecting a dual-lens camera probe, a specific button is used to switch between the front and side lenses.
Instructions
Powering On/Off: Press and hold the power button for a few seconds.
Connecting Camera Probe: Connect the camera probe to the device before turning the device on. If replacing the camera probe, restart the device afterwards.
Inserting TF Card:
- Ensure the device is powered off before inserting or removing the TF card.
- Verify the correct direction and orientation of the TF card before insertion.
- Gently press the TF card to eject it.
- Avoid using excessive force when inserting or removing the TF card to prevent damage to the card slot structure.
- A TF card must be inserted to take photos or record videos.
Language Settings
The default language of the system is English. The device supports the following languages: English, Chinese, German, French, Spanish, Italian, Russian, and Japanese.
Setting Path:
- Press the 'M' button twice to enter the settings page.
- Select the second item, labeled "Language".
- Use the Up and Down buttons to select your desired language.
- Press the 'OK' button to save your selection.
Copying Photo and Video Files to Computer
You can copy photos and video files from the TF card to a computer using one of the following methods:
- TF Card Reader: Insert the TF card into a compatible card reader connected to your computer.
- Type-C Cable: Connect the device to your computer using the provided Type-C data cable.
This allows for direct data transfer.
Specification Parameters
| Parameter | Specification |
|---|---|
| Screen | 4.5-inch HD Display |
| Screen Resolution (Pixels) | 854x480 |
| Support Probe Resolution (Pixels) | 1.0 Megapixel HD |
| Image Capturing Resolution (Pixels) | 1920x1080 |
| Video Recording Resolution (Pixels) | 1280x720 |
| Ports | Type-C charging port, TF memory card slot |
| Camera Diameter | Single lens: 5.5mm/optional Double lens: 8mm Three lens: 7.9mm |
| Resolving Power | 100W Pixel |
| Angle | Single lens: 70° Double lens: 70° Three lens: 78°±3° |
| Auxiliary Lighting | Single lens: 6 adjustable LED lamps Double lens: 6+1 adjustable LED lamps Three lens: 6+1+1 LED lights with adjustable brightness |
| Focus Range | Single lens: Main lens 30-100mm Double lens: Main lens 30-100mm Three lens: Main lens 30-80mm, Side lens 20-50mm, Side B lens 20-60mm, Side C lens 15-30mm |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
| Power Source | 2500mAh Lithium Battery |
| Working Time | 3-4 hours |
| Charging Time | 3-4 hours |
| Packaging | Monitor, camera probe, Type-C charging cable, user manual, screen bracket |
| Accessories | Pick-up hook, magnet, mirror (Note: 3.9mm model has no accessories) |
Customer Service
For any product quality concerns, please contact TESLONG customer service. We are eager to assist you.
Manufacturer Service:
- Email: support@teslong.com | info@teslong.com
- Phone (US): 1-877-899-8809
- Operating Hours: Monday to Friday, 8:00 AM – 5:00 PM PST
Certifications: FC, CE, RoHS
Model/Version Information: TESLONG MS450.-NTC 202109 V1 3.06.02.000216
