User Manual

Product Overview

This new Digital Video Recording Endoscope is a portable, handheld, multifunctional inspection system featuring a 4.5' IPS HD display with powerful recording capability. Users can capture images (JPG) or videos (MOV) on the TF card with 720P HD resolution. With an ergonomic and robust design, users can control all keys with one hand easily, and the adjustable handle offers extra comfort. The stainless steel shield and overall reinforced structures ensure stability under heavy duty.

The device has a small diameter probe with 6 adjustable LED lights and a high-performance camera module offering crystal clear output. Furthermore, it has an integrated CREE LED flashlight for dark area working assistance.

Applications

• Automotive / Diesel Repair and Maintenance.
• Inspection of hard-to-reach or hard-to-see areas or equipment.
• Plumbing, construction, restoration applications.
• Science Education.
• Outdoor Exploration.

Features

• View live inspection video instantly on the 4.5' IPS HD display.
• 720P high definition for image capture and video recording.
• 180° image flip monitor.
• High sensitivity for low-light HD camera chip in the tip.
• CREE LED flash assisting dark area work.
• Adjustable handle.

Safety

⚠️ WARNING! Please read all safety warnings and all instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and serious injury.

• Keep the tool dry, clean, and free from oil, water, gas, or other materials causing corrosion.
• Keep the work area clean and well lit.
• This appliance is not intended for use by persons with limited physical, sensory, or mental capabilities.
• This appliance is not intended for medical use or personal inspection.
• Keep bystanders and children away while operating the tool.
• Do not overreach; keep proper footing and balance at all times.

Battery

Charge the device when the power button turns red; the red light blinks when charging and will be off when fully charged. Only use a 5V indoor home use USB charger to charge the device. Please charge the device at least once every 3 months if it is left unused for a long time to prevent damage to the battery.

Maintenance

Always keep the camera lens clean. Should any other components not mentioned need to be replaced, please contact our service agents.

Notices

• Long press the power button to Power On or Power Off. Please remove the rubber protective cover before using this tool.
• Please make sure the camera is connected firmly and tightly to the monitor; otherwise, there will be a noisy image on the screen.
• When connecting a dual lens camera probe, press the designated button to switch between the front and side lenses.
• Please check the battery level if you cannot power on the device or if there is a noisy image on the screen.
• This product comes with a TF card already inserted. You can press it to eject the TF card and use a card reader to view or copy photos and videos. Please note that photos or videos can only be taken when a TF card is inserted; otherwise, you can only preview the video stream.
• Insert Card: Power off the device, open the cover on the backside of the monitor, and insert the TF card according to the provided chart. Ensure the device is powered off before operating the TF card, and that the card is inserted correctly. This device requires a Class 10 high-speed TF card; it will not work properly with a Class 4 low-speed card.

Instructions for Use

Device Components and Controls:

• Micro SD Card Slot: For inserting TF cards (Class 10 recommended).
• Micro USB Port: For charging.
• [Up/Rotate] Button: Used for navigation and screen rotation.
• [Snap OK/Freeze] Button: Takes photos, records video, freezes the screen, or confirms selections.
• [Menu] Button: Accesses settings menus.
• [MODE] Button: Switches between Photo, Video, and Playback modes.
• LED Torch: Integrated CREE LED flashlight for illumination.
• Handle Adjustment Button: Button to unlock and adjust the handle.

Operation:

• Power: Long press the power button to turn the device on or off.
• LED Brightness: Short press the designated button to adjust the LED brightness of the camera.
• Mode Switching: Press the [MODE] button to cycle through Photo, Video, and Playback modes.
• Capture: In Photo/Video mode, press the [Snap OK/Freeze] button to take a photo or start/stop recording a video.
• Screen Freeze: Press the [Snap OK/Freeze] button to freeze the current screen display.
• Screen Rotation: Press the [Up/Rotate] button to rotate the screen view.

Settings Menu:

• In Photo, Video, or Playback modes, press the [Menu] button once to enter the settings menu for that specific mode (e.g., Resolution, Date Stamp, Shutter Sound, Recording settings).
• Use the [Up Arrow] and [Down Arrow] buttons to select options and the [OK] button to confirm changes.
• Press the [Menu] button twice to enter the main system settings menu (e.g., Auto Power Off, Language, Date/Time, Format, Default Setting, Version).
• Use the [Up Arrow] and [Down Arrow] buttons to select options and the [OK] button to confirm changes.

Reset: If the screen freezes or buttons do not respond, press the [Reset] button on the back of the device.

Display Indicators: The screen displays Time and Date, Mode (Photo/Video/Playback), Battery Status ([Battery Full], [Battery Middle], [Battery Low], [Battery Empty]), and TF Card Status ([TF Card Present] / [No TF Card]).

Technical Specifications

Contents

• Digital Endoscope
• User's Manual
• Probe
• Accessories: [pick up hock], [magnet], [mirror]
• Micro USB cable (3.9mm No accessories)

EU Environmental Protection

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.