Sideboard
Important Information & Warnings
Please read the entire manual before starting to assemble and/or use this product. Follow the manual thoroughly and keep it for further reference.
Assembly Tips
- Avoid Scratches: To prevent scratching, this furniture should be assembled on a soft surface, such as a rug.
- Improve Efficiency: Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.
Anti-Topple Warning
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment if included with this product. Please purchase a wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.
Important Maintenance Note
It is important that any product assembled using screws is re-tightened 2 weeks after assembly, and once every 3 months, to assure stability throughout the product's lifespan.
Cleaning Instructions
For regular maintenance and cleaning: For the frame, use a rag dipped in neutral detergent to wipe it, then dry with a clean rag. For glass materials, wipe with a rag dampened with glass cleaner, and then dry with a dry rag.
Installation Caution
Do not use an electric screwdriver, and do not use too much force when installing, as the board is easy to break.
Tools Required
Please prepare the following tools:
- Tape Measure
- Pencil
- Spirit Level
- Hammer
- Phillips Head Screwdriver
- Flathead Screwdriver
- Electric Drill (use with caution)
Hardware Identification
When installing, please carefully confirm whether each screw corresponds to the manual. Accessories with similar shapes can be distinguished by size.
| Identifier | Description | Quantity |
|---|---|---|
| A | Ø7 x 35 mm | 6 |
| B | Ø15 x 9 mm | 6 |
| C | Ø6 x 30 mm | 18 |
| D | Ø4 x 35 mm | 14 |
| E | 2 | 2 |
| F | Ø5 x 20 mm | 8 |
| G | 4 | 4 |
| H | 8 | 8 |
| J | 3 x 14 mm | 32 |
| K | Ø4 x 16 mm | 2 |
Parts Identification
The following diagram shows an exploded view of all parts included in the package. Please verify all parts are present before assembly.
Diagram Description: The diagram displays all components of the sideboard laid out separately. It includes the top panel (15), main body panels (1, 2, 3, 4, 5, 6, 7, 8, 9), doors (12, 13), legs (10, 11), and back panels (14). Each part is numbered for easy reference.
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 1 | Main Body Panel | 1 |
| 2 | Main Body Panel | 1 |
| 3 | Side Panel | 1 |
| 4 | Side Panel | 1 |
| 5 | Divider Panel | 1 |
| 6 | Shelf Panel | 2 |
| 7 | Support Rail | 1 |
| 8 | Support Rail | 1 |
| 9 | Top Support Rail | 1 |
| 10 | Leg | 4 |
| 11 | Leg | 1 |
| 12 | Door Panel | 1 |
| 13 | Door Panel | 1 |
| 14 | Back Panel | 2 |
| 15 | Top Pad/Surface | 1 |
Assembly Instructions
Step 1: Attach Screws to Panel 1
Fix quickfit screw A (Ø7 x 35 mm) to panel 1 as shown. Please note: do not use an electric screwdriver or excessive force to rotate, as this may cause the panel to crack.
Step 2: Connect Support Rails to Top Rail
Connect panels 7 and 8 to panel 9 using screw D (Ø4 x 35 mm) as shown.
Step 3: Attach Assembly to Panel 1
Attach the assembled component (panels 7, 8, 9) to panel 1 using screw D (Ø4 x 35 mm) and wooden dowel C (Ø6 x 30 mm) as shown.
Step 4: Connect Side Panels to Base Panel
Connect panels 3, 4, and 5 to panel 2 using screw D (Ø4 x 35 mm) and wooden dowel C (Ø6 x 30 mm) as shown.
Step 5: Attach Legs
Fix legs (part 10) and leg (part 11) to panel 11 as shown.
Step 6: Install Shelf and Secure
Slide panel 6 into the available slots in panels 3 and 4. Attach the two assembled components using wooden dowel C (Ø6 x 30 mm). Turn cam locks B (Ø15 x 9 mm) clockwise to tighten as shown.
Step 7: Attach Hinges and Doors
Fix hinge G (4x) to panels 12 and 13 using screw J (3 x 14 mm). Then, fix the two doors (panels 12 and 13) to the assembled unit using screws K (Ø4 x 16 mm) and E (2x) as shown. Be cautious not to use an electric screwdriver or excessive force.
Step 8: Fix Back Panel
Use part H (8x) to fix the back panel (part 14) using bolts J (3 x 14 mm) as shown.
Step 9: Insert Dowel Pins and Attach Panel 14
Insert dowel pins F (Ø5 x 20 mm) into panels 3 and 4. Then, attach panel 14 as shown.
Step 10: Place Top Pad
Place pad 15 on top of the assembled sideboard.
Warranty Information
Warranty Claims
- There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty starts from the date of purchase, which must be verified by proof of purchase.
- Before making a claim, please visit feedbackstation@163.com for further information. Our dedicated After-sale Team will endeavor to answer all messages within 48 hours. Please include your purchase order number and details of the problem when requesting a replacement part. Replacements will be arranged within 48 hours. If the item is out of stock, we will reply with a shipping date.
- The product must be used in accordance with the instructions provided.
- For other reasons, if the furniture needs to be returned, it must be cleaned and dried and the return initiated within 30 days of receipt.
Type of Warranty Claim
- Failure to follow the furniture instructions will invalidate the warranty.
- The warranty does not cover damage during installation but does cover damage during transportation.
Scope of Responsibility
- The manufacturer shall not bear any responsibility for misuse or user damage and/or loss of parts during the installation of furniture.
- Damage and scratches incurred after use are not covered by the warranty.
Warranty Coverage Areas
The warranty relates to all items bought in The US and covers the following areas:
- Sheet parts: 1 month from the date of purchase.
- Electrical parts: 1 month from the date of purchase.
Returns Policy
Changed Your Mind?
If you have purchased and simply changed your mind, please follow the retailer's instructions for returns.
Defective Items
If your item is defective in any way, i.e., it doesn't work but you can't identify why, please consult our FAQ section at feedbackstation@163.com, as there may be a simple solution to the issue.
Damaged Items
If you receive an order with obvious shipping damage from the retailer, we suggest refusing the delivery. If the delivery has been accepted and shipping damage is found later, please follow the specific instructions advised by the retailer.
In all circumstances, please save all packaging material and paperwork for the order. Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfillment center, you jeopardize your chances of making a claim, and you may not receive credit for the return.
