Winco Paper Towel Dispenser

Mounting the Dispenser

• Open the unit by pressing the button at the top-rear.
• Place the dispenser on the desired wall location.
• Mark and install wall anchors.
• Mount using screws and washers.

Filling the Dispenser

Note: Ensure paper is loaded in the correct direction.

• Open the unit by pressing the button at the top-rear. A key may be required if the unit is locked.
• Load the paper roll onto the spools and feed the paper through the roller by turning the knob on the side towards the back.
• Close the unit.

Locking the Unit (Optional)

• Close the dispenser.
• Insert the locking key into the button located at the top-rear of the dispenser.
• Turn the key to lock the unit.