WINCO W6010DE/J Generator Parts List

Document Number: 24006-006PL

Revision: Rev A

WINCO Service
Phone: 507-357-6831
Email: service@wincogen.com
Website: www.wincogen.com

Engine and Generator Assembly

Diagram showing the main engine and generator components, with numbered callouts indicating specific parts.

ITEM NO. PartNo DESCRIPTION QTY.
1 16346-006 MECC ALTE S16W-130 1
2 16346-021 S16W-130/A GEN END COVER 1
3 300116-6 KOHLER KD440 1
4 481-000 LOCK 3/8 SPLIT 4
5 82539-001 SELF TAP.SC.6X3/8 1
6 93704-000 SOC.HCS 3/8-16X1 4

Cradle Assembly

Diagram illustrating the generator's cradle assembly, including the frame, battery mounting, and shock absorbers, with numbered parts.

ITEM NO. PartNo DESCRIPTION QTY.
1 63073-054 WELDED FRAME 1
2 16175-031 BATTERY ASSEMBLY 1
3 98807-002 SHOCK MOUNT 5
4 98806-000 WASHER .406 X 2 5
5 467-000 HHCS 5/16-18X.75 10
6 16249-000 .3125-18 FLANGE 15
7 16250-000 NUT HEX 3/8 -16 FLANGE LOCK 4
8 21698-001 TORX PAN HEAD SCREW #10 1
9 64858-005 BHSCS 5/16-18 X 2.00 1
10 23590-002 CURVED HEAD BOLT 5/16-18 X 1 3/4 3
11 15799-006 KEY START BRACKET 1
12 9769-155 LEADWIRE ASSEMBLY (GROUND) 1
13 91658-008 HHCS 3/8-16X2-3/4 GR5 4
14 471-000 5/16-18 X 2.25 1

Left Side Panel

Diagram showing the left side panel of the generator, featuring the WINCO logo and model designation, with numbered components.

ITEM NO. PartNo DESCRIPTION QTY.
1 300216-260 LEFT SIDE PANEL 1
2 16249-000 .3125-18 FLANGE 4
3 23590-002 CURVED HEAD BOLT 5/16-18 X 1 3/4 4

Decal Kit

Diagrams illustrating the placement of various decals on the generator unit, along with a table listing each decal and its purpose.

ITEM NO. PartNo DESCRIPTION QTY.
1 15209-002 DECAL-DANGER CARBON MONOXIDE 1
2 15209-003 UL-DECAL ELECTICAL SHOCK CAN KILL 1
3 15209-011 DECAL (DANGER DIESEL FUEL) 1
4 15209-014 DECAL - CHECK OIL 1
5 15209-036 PROP 65 WARNING DECAL 1
6 15209-102 DECAL-DANGER CARBON MONOXIDE 1
7 15209-103 UL-DECAL ELECTRICAL SHOCK CAN KILL 1
8 60710-018 OIL WARNING TAG 1
9 63941-001 DECAL -HOT SURFACES 1
10 63966-004 NAMEPLATE, WINCO PORTABLE 1
11 64918-000 DECAL-DANGER (CO) USE OUTSIDE 1
12 97381-001 DECAL-DIESEL FUEL ONLY 1
13 97382-000 DECAL-DO NOT USE STARTING FLUIDS 1

Engine Parts

Diagram of the generator engine, with numbered components and a table detailing each part.

ITEM PART DESCRIPTION QTY
1 3-100 Fuel Filter 1
2 3-101 Fuel Pump 1
3 3-102 Air Filter Element 1
4 3-103 Starter Motor 1
5 3-104 Oil Pressure Switch 1
6 3-105 Oil Filter (Interal to Block) 1
7 3-106 Control Panel (With Key) 1
8 3-107 Start Key 1
9 3-108 Fuel Solenoid 1

Contact service for other engine parts as needed.

Fuel System

Diagram of the fuel system, including the fuel tank, fuel lines, and associated fittings, with numbered components and a parts list.

ITEM NO. PartNo DESCRIPTION QTY.
1 439-000 .25-20 X 1 HHB 4
2 16248-000 .25-20 FLANGE NUT 4
3 62999-001 HOSE CLAMP .5 OD RED 4
4 267-002 FLAT WSH 9/32X1X.063 4
5 40078-018 HOSE 0.25 ID 26 IN 1
6 64024-410 VENTED FUEL CAP LD-C001 1
7 40077-013 3/16 ID RUBBER HOSE 18 IN 1
8 40078-033 HOSE .25ID RUBBER 2IN 1
9 98590-002 HOSE REDUCER 1/4X3/16 (SCP) 1
10 64024-013 FUEL TANK 7 GAL. STEEL GASOLINE 1
11 80903-002 SLOSH VALVE STANT HIGH FLOW W/ GROMMET 29.5MM HOLE 1
12 62999-005 HOSE CLAMP .41 OD GREEN 2

NOTE: UNINSTALL THE METAL BOTTOM CAP AND REMOVE THE VALVE AND SPRING. REINSTALL BOTTOM CAP BEFORE INSTALLING INTO FUEL TANK.

Fuel Tank

Detailed diagram of the fuel tank, showing its shape and mounting points, with a parts list for the tank and its components.

F PartNo DESCRIPTION QTY.
1 64024-013 FUEL TANK 7 GAL STEEL GASOLINE 1
2 64024-401 FUEL CAP, SEALED, AUDIBLE, TETHERED 1
3 64024-404 168B FUEL CONTROL VALVE 1
4 64024-406 RUBBER BUSHING 4
5 64024-402 FUEL LEVEL GAUGE - 112 MM 1
6 64024-405 ANTI-CRUSH INSERT 4
7 64024-403 FUEL FILL FILTER 1

ALL ITEMS LISTED ABOVE IN THIS TABLE ARE INCLUDED WITH A 64024-013 FUEL TANK PURCHASE.

9 | 62273-262 | TOUCH UP PAINT, BLACK 3048

Battery Kit and Lifting Eye Kit

Diagrams for the battery kit and lifting eye kit, with associated parts lists for battery components and lifting hardware.

Battery Specification: BCI Group U1 - 300 CCA

ITEM NO. PartNo DESCRIPTION QTY.
1 15676-017 BATTERY TRAY 1
2 15767-004 POS BATTERY CABLE 1
3 15767-003 NEG BATTERY CABLE 1
4 16145-000 INSULATOR, TERMINAL 1
5 16234-000 CAP PLUG 1
6 16336-009 BATTERY SUPPORT 1
7 21698-001 TORX PAN HEAD SCREW #10 5
8 95568-000 THREAD STUD 10-24 X .625 2
9 96286-002 FLAT WASHER NYLON 5

Lifting Eye Kit Components

ITEM NO. PartNo DESCRIPTION QTY.
1 471-000 5/16-18 X 2.25 2
2 526-000 WASHER ID .375 OD .890 2
3 16249-000 .3125-18 FLANGE 2
4 300148-24 LIFTING EYE 1
5 16329-000 BATTERY TIE DOWN STRAP 1

SEE MANUAL FOR INSTALLATION INSTRUCTIONS.

Receptacle Assembly

Diagram of the receptacle assembly, showing the panel, various receptacles, circuit breakers, and terminal connections.

ITEM NO. PartNo DESCRIPTION QTY.
1 15221-052 RECEPTACLE BOX 1
2 15458-076 RECEPTACLE PANEL 1
3 15620-008 STANDARD DUPLEX COVER 1
4 16488-018 CIR.BRK.30A-2PL-240V-GFCI-CARLING 1
5 48042-001 TERMINAL, GROUND LUG, 6-14AWG 1
6 50766-000 NEMA 5-20R DUPLEX RECEPTACLE 1
7 56359-000 L5-30R 1
8 58165-18 DISPLAY MODULE CABLE 1
9 58166-009 DISPLAY MODULE 1
10 58166-009 DISPLAY MODULE MOUNTING CLIP 1
11 58166-010 TERMINAL BLOCK MODULE 1
12 62486-000 GROMMET 1 X 1.375 1
13 91286-001 CIRCUIT BREAKER, 20A, 1 PL 2
14 97360-000 RECEPTACLE, NEMA L14-30R 120_240V 1
15 425-000 #6 FLATWASHER 2
16 466-000 .25-20X.75 HHB 2
17 511-000 #8 FLATWASHER 5
18 512-000 .25 WASHER 4
19 6917-001 RHMS 6-32 X .375 BLACK ZINC 4
20 7792-001 BZ RHMS 6-32X.5 7
21 21698-001 TORX PAN HEAD SCREW #10 2
22 21976-000 #8 LOCKWASHER EXTERNAL TOOTH 1
23 24198-001 BHMS #8-32 x .625 BLACK 5
24 47517-000 .25-20 NYLOCK 2
25 51802-000 NUT HEX #6-32 NYLOCK 6
26 95985-000 #8-32 NYLOK HEX NUT 5
27 4156-000 TERMINAL RING 12-10 #10 STUD 5
28 4158-000 TERMINAL RING 16-14 AWG #10 4
29 16346-010 4-POSITION PLUG 1
30 16346-011 TERMINAL LUG 4
31 22370-007 TERMINAL SPADE 16/14AWG #10STUD 12
32 22370-013 TERMINAL, SPADE, 12-10AWG, #10 STUD 4
33 44791-000 TERMINAL CLOSED CONNECTOR 1
34 48602-003 TERMINAL FEMALE 16-14 AWG .250 TAB 4

NOTE: TERMINALS/LUGS NOT SHOWN

Generator End Parts List

Diagram of the generator's end components, including rotor and stator, with a parts list.

ITEM PART DESCRIPTION QTY
1 16346-021 COMPLETE S16W-130 GEN 1
2 16346-612 CAPACITOR, 25MFD 425 VAC 1
3 16346-106 VARISTOR SR561K10DS400 2
4 16346-105 DIODE, 10A 1200V 2
5 55223-000 REAR BEARING 6203-2Z C3 1
6 9-100 PLASTIC HOLE PLUG 1
7 16346-010 LOAD PLUG 1
16346-011 LOAD PLUG PINS 4

S16W-130 Expected Resistance (Ω)

Rotor Stator Excitation
3.95 0.360 2.446

Schematic diagrams for Field Winding, Excitation Winding, and Power Winding.

Receptacle Wiring Diagram

Wiring diagram illustrating the connections for the generator's receptacles, including NEMA 15-30, L14-30R, GFCI breaker, and load outputs.

Engine Wiring Diagram

Wiring diagram for the generator's engine, showing connections for the alternator, starter motor, battery, switches, and integrated circuit/voltage regulator, including wire colors and gauges.

Component
1 Alternator
2 Starter Motor
4 Battery
5 Pressure Switch
6 Solenoid Valve
7 Ignition Switch

PDF preview unavailable. Download the PDF instead.

24006-006PL W6010DE SOLIDWORKS PDF Publisher

Related Documents

Preview WINCO HPS12000HE-03/B Parts List and Diagrams
Comprehensive parts list and assembly diagrams for the WINCO HPS12000HE-03/B portable generator, including engine, fuel system, and receptacle components.
Preview Winco PSS60/B, PSS90/B, DSE7110 Standby Generator Installation and Operations Manual
Comprehensive installation and operations manual for Winco PSS60/B, PSS90/B, and DSE7110 standby generator sets. Covers safety precautions, system description, installation procedures, starting procedures, troubleshooting, and warranty information.
Preview WINCO ULPSS12H4W/E Packaged Standby System Installation and Operators Manual
Comprehensive installation and operators manual for the WINCO ULPSS12H4W/E Packaged Standby System. Covers safety, proper use, installation, specifications, fuel, battery, wiring, startup, maintenance, troubleshooting, warranty, schematics, and layout for this generator set.
Preview WINCO PSS60/C, PSS90/C, DSE7310 Installation and Operations Manual
Comprehensive installation and operations manual for WINCO PSS60/C, PSS90/C, and DSE7310 package standby generator systems. Covers safety, setup, operation, troubleshooting, and warranty.
Preview Winco 18" Pizza/Pretzel Warmer Model 51018 - Operating Manual and Specifications
Comprehensive operating manual, safety instructions, parts list, and wiring diagram for the Winco 18" Pizza/Pretzel Warmer, Model 51018. Learn how to safely operate, maintain, and assemble your commercial food warmer.
Preview WINCO ULPSS12H4W/E Packaged Standby System Installation and Operators Manual
Comprehensive installation and operators manual for the WINCO ULPSS12H4W/E Packaged Standby System. Covers safety instructions, product description, specifications, installation procedures for fuel, battery, and electrical connections, initial startup, testing, preventive maintenance, troubleshooting, and warranty information.
Preview WINCO 27.6kW-36kW PTO Generators: Installation and Operators Manual
Comprehensive installation and operators manual for WINCO 27.6kW to 36kW PTO generators, covering safety, specifications, installation, operation, maintenance, and troubleshooting.
Preview WINCO ULPSS20B2W/A Packaged Standby System Installation and Operators' Manual
This manual provides comprehensive installation, operation, and maintenance instructions for the WINCO ULPSS20B2W/A packaged standby generator system. It covers safety precautions, system components, setup procedures, troubleshooting, and warranty information.