RÖNNSKÄR Corner Shelf Unit Assembly Instructions
Important Safety Information
WARNING!
Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
Assembly Steps
-
Assemble the base frame. Connect the main structural components of the base. This step likely involves using parts such as 100002 and other fasteners.
-
Attach the first set of curved side supports to the base structure. Use 6x fasteners (e.g., parts 100042 and 112666) for this connection. (Refer to diagram on page 7).
-
Continue attaching the curved side supports to form the structure. Use another 6x fasteners (e.g., parts 100042 and 112666). (Refer to diagram on page 8).
-
Insert the shelf support caps into the ends of the upright tubes. Use 3x caps (part 111029). (Refer to diagram on page 8).
-
Attach the decorative top piece to the unit. This step involves 2x connections. (Refer to diagram on page 9).
-
Adjust the feet of the unit to ensure it is stable and level. The unit has 3x adjustable feet (↕️). (Refer to diagram on page 9).
-
Place the shelves onto the unit. Arrows indicate the placement of the shelves. (Refer to diagrams on page 10).
-
Place the remaining shelves onto their respective supports to complete the assembly.
