RÅGRUND Corner Shelf
Important Safety Information
WARNING: Furniture Tip-Over Hazard
Children have died from furniture tip-over. To reduce the risk of furniture tip-over:
- ALWAYS install the provided anti-tip device. ⚠️
- NEVER put a TV on this product. ??
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves. ??♂️
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Assembly Instructions
Parts Included
- 12 x Screws (Part ID: 130608) ?
- 1 x Allen Key (Part ID: 100006) ?
Steps:
- Step 1: Prepare the base/top panel. Ensure correct orientation as shown in the diagram. [Diagram shows a panel with holes and a detail of a corner piece.]
- Step 2: Attach the first side panel to the base/top panel using 2 screws (130608) and the allen key (100006). [Diagram shows two panels being joined with screws.]
- Step 3: Attach the remaining side panels and shelves. Use 6 screws (130608) in total for this step. [Diagram shows multiple shelves being attached to side panels.]
- Step 4: Assemble the triangular shelf structure. Secure the components using 4 screws (130608). [Diagram shows the main frame being assembled.]
- Step 5: Secure the unit to the wall using the provided anti-tip device. Use 2 screws (130608) for this purpose. [Diagram shows the unit being attached to a wall with the anti-tip strap.]
Important Note:
Always secure furniture to the wall using the anti-tip device to prevent tip-over accidents. ⚠️
