RÖNNSKÄR Wash-basin Shelf
Assembly Instructions
Brand: IKEA
Important Information
As wall materials vary, screws for fixing to wall are not included. For advice on suitable screw systems, contact your local specialised dealer.
(Hebrew translation: קירות שונים עשויים מחומרים שונים, לכן האריזה אינה כוללת אבזרי חיבור. מומלץ לפנות לחנות מתמחה בנוגע לאבזרי החיבור המתאימים לסוג הקיר שבביתכם.)
Tools Required
The following tools are recommended for assembly:
- Spirit level ?
- Screwdriver ?
- Adjustable wrench ?
Parts List
Please check that you have all the parts before starting assembly:
- 4x Curved metal rod (Part 100002)
- 4x Threaded plastic cylinder (Part 100042)
- 4x Nut (Part 112666)
- 6x Screw (Part 114754)
- 4x Screw (Part 114755)
- 4x Round plastic cap/foot (Part 111029)
- 2x Ring bolt (Part 114660)
- 1x Light bulb (Part 114659)
Conceptual: Before starting, a person is shown contemplating the parts in a box, then making a call to IKEA for assistance.
Assembly Steps
Step 1
Attach the 4 curved metal rods (Part 100002) to the top frame. Insert the threaded plastic cylinders (Part 100042) into the frame holes, then secure the rods using the nuts (Part 112666).
Step 2
Attach the 2 ring bolts (Part 114660) to the side panels of the frame by screwing them into the designated holes.
Step 3
Install the light bulb (Part 114659) into the fitting on the top frame.
Step 4
Attach the 4 round plastic caps/feet (Part 111029) to the bottom of each leg by pushing them on.
Step 5
Fold down the side panels and position the main shelf panels. Slot the shelf panels into place and secure them.
Step 6
Secure the main shelf panels using 2 screws (Part 114755).
Step 7
Place the top shelf/surface onto the frame. Secure it using 4 screws (Part 114754) and 4 screws (Part 114755), using an adjustable wrench for tightening.
Step 8
Adjust the height of the shelf by turning the feet at the bottom of the legs to ensure the unit is stable and level. ⬆️⬇️
