FRÖSJÖN Corner Shelf Unit

Important Safety Information

Risk of Furniture Tip-over

Furniture tip-over can cause severe injury or death to children. To minimize this risk, it is crucial to follow these safety guidelines:

• Always install the provided anti-tip device. ⚠️
• Never place a television or other heavy objects on this product. ?❌
• Never allow children to stand, climb, or hang on any drawers, doors, or shelves. ? climbing ❌
• Never open more than one drawer at a time. ➡️ 1 drawer ⬅️
• Place the heaviest items in the lowest drawers to improve stability. ⚖️⬇️

Assembly Steps

Step 1: Preparation

Gather the necessary tools: a screwdriver and a spirit level. Ensure you have a clear and safe workspace.

[Diagram description: Illustration shows a person holding a screwdriver and a spirit level, indicating the tools required for assembly.]

Step 2: Assemble Base Frame

Begin by assembling the base frame of the unit. Two people are recommended for this step. Ensure all components are correctly aligned before proceeding. Avoid misaligned parts, as indicated by a crossed-out illustration.

[Diagram description: Shows two figures assembling the base frame. A second diagram shows an incorrectly assembled frame with a red cross over it.]

Step 3: Attach Vertical Supports

Attach the vertical support pieces to the assembled base frame. Use the provided screws and fasteners as shown in the detailed view.

[Diagram description: Shows the frame with vertical supports being attached. A magnified view highlights the specific screws and fasteners used.]

Step 4: Continue Frame Construction

Continue connecting the frame components and vertical supports according to the diagram. Ensure all connections are secure.

[Diagram description: Illustration shows the ongoing assembly of the unit's frame structure.]

Step 5: Install Shelves

Insert the shelves into the frame. The diagram shows the shelves being placed onto the support structure.

[Diagram description: Shows shelves being inserted into the frame. A magnified view illustrates the method of attachment for the shelves.]

Step 6: Position Shelves

Place the shelves onto the frame, following the indicated order and direction of placement, as shown by the arrows.

[Diagram description: Shows shelves being placed onto the frame, with arrows indicating the downward motion for placement.]

Step 7: Complete Shelf Installation

Continue placing the remaining shelves until all are in position. Ensure each shelf is stable.

[Diagram description: Shows the unit with all shelves installed. A magnified view shows the final attachment of a shelf.]

Step 8: Secure Unit to Wall (Anti-Tip)

Crucially, secure the unit to the wall using the provided anti-tip hardware. This step is essential for safety.

[Diagram description: Shows the unit being secured to a wall using screws and brackets. A magnified view details the wall-mounting hardware.]

Step 9: Adjust Levelling Feet

Adjust the levelling feet located at the base of the unit. This ensures the unit is stable and level on various floor surfaces.

[Diagram description: Shows a close-up of the unit's base, illustrating how to rotate the feet to adjust height and level the unit.]

Step 10: Final Wall Attachment

Complete the wall attachment process by securing the unit firmly to the wall with the final fasteners.

[Diagram description: Shows the fully assembled unit in its final position, attached to the wall.]