VITTSKÄR Assembly Instructions
IKEA Design and Quality
Included Parts Overview
Allen Key (130445)
Screw (10101835)
Nut (10092932)
Bracket (10127889)
Bracket (10127891)
Bracket (10127890)
Bracket (10127888)
Part (100001)
Note: Specific quantities for each part are indicated in the assembly steps.
Assembly Steps
-
Step 1: Attach Brackets to Frame
Place the frame on a soft surface to prevent scratching. Attach two brackets (10127889) to the frame using two screws (10101835) and two nuts (10092932). Ensure correct orientation. ✔️ ❌
-
Step 2: Attach Legs
Attach one leg (130445) to the frame using one screw (10101835) and one nut (10092932). Repeat for all four legs. ✔️ ❌
-
Step 3: Connect Frame Sections
Connect two frame sections together using one screw (10092932) and one screw (10101835). ✔️ ❌
-
Step 4: Attach Frame Section
Attach another frame section to the existing structure using one screw (10101835) and one screw (10092932). ✔️ ❌
-
Step 5: Attach Frame Section
Attach another frame section using one screw (10101835) and one screw (10092932). ✔️ ❌
-
Step 6: Secure Frame
Secure the frame by attaching components using two screws (10101835) and two nuts (10092932). ✔️ ❌
-
Step 7: Secure Frame
Continue securing the frame using two screws (10101835) and two nuts (10092932). ✔️ ❌
-
Step 8: Tighten All Screws
Use the Allen key (130445) to tighten all eight screws (10101835) securely. ✔️ ❌
-
Step 9: Attach Seat/Backrest Component
Attach the seat or backrest component to the frame using eight screws (part number not specified in diagram, likely 10101835 or similar) and the Allen key. ✔️ ❌
-
Step 10: Attach Frame Supports
Attach additional frame supports using six screws (part number not specified in diagram, likely 130445 or similar) and the Allen key. ✔️ ❌
-
Step 11: Attach Bracket
Attach a bracket (10127888) to the surface using two screws (10101835) and two nuts (10092932).
-
Step 12: Final Frame Assembly
The main frame structure is now assembled and ready for further components.
-
Step 13: Attach Base Components
Attach base components using two screws (10092932) and two screws (10101835).
-
Step 14: Place Top/Cushion
Place the top surface or cushion onto the assembled frame.
Important Notes for Assembly
- Assemble on a clean, flat surface to avoid damage.
- Ensure all screws are tightened properly. Do not overtighten.
- Refer to the diagrams for correct part orientation and placement.
- If you encounter difficulties, consult the IKEA website or customer service.
