⚠️ WARNING
Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install anti-tip device provided.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Parts List
The following parts are included in the assembly kit (refer to diagrams for specific usage):
- Main Document Identifier: AA-2578574-4
- Assembly Tool: AA-1908823 (likely an Allen key)
- Cabinet Panels & Structure:
- 1x Main Unit Component (AA-2578574-4 reference)
- 2x Part 139467
- 2x Part 155197
- 2x Part 139468
- 2x Part 155198
- 4x Part 133127
- 2x Part 155201
- 4x Part 139477
- 2x Part 155200
- 4x Part 10119658
- 2x Part 10119673
- 4x Part 10119600
- 2x Part 141413
- 2x Part 141414
- 4x Part 131372
- 2x Part 152470
- 2x Part 155675
- 2x Part 152650
- 2x Part 152651
- Hardware & Fasteners:
- 12x Screw 10093081
- 6x Screw 10093082
- 2x Screw 108444
- 2x Screw 101313
- 12x Screw 10119600 (used for back panels and handles)
- 4x Screw 131372 (used for back panels)
- 4x Screw 152470 (used for back panels)
Note: Quantities and part numbers are based on the provided diagrams. Some parts may be used in multiple steps or configurations.
Assembly Guide
Follow these steps to assemble your EKET cabinet. Ensure all parts are present and identify them using the part numbers before beginning.
Step 1: Frame Construction
Begin by assembling the main frame of the cabinet. This involves connecting the primary side panels (e.g., 139467, 139468) with the top and bottom panels (e.g., 155197, 155198). Use the specified screws (e.g., 10093081, 10093082) and dowels (e.g., 10119600) as indicated in the diagrams. Ensure the frame is securely fastened and square.
Step 2: Shelf Installation
Insert the shelves (e.g., 133127, 139477) into the pre-drilled positions within the cabinet frame. Secure each shelf using the appropriate screws (e.g., 101313, 108444).
Step 3: Back Panel Attachment
Attach the back panels (e.g., 10119658, 10119673) to the rear of the assembled cabinet frame. These are typically secured using smaller screws (e.g., 10119600, 131372, 152470).
Step 4: Base/Foot Attachment
Turn the cabinet upright or lay it on its back. Attach the feet or base components (e.g., 152650, 152651) to the underside of the cabinet using the designated screws (e.g., 10093081).
Step 5: Door Mounting and Handles
Attach the hinges (e.g., 141413, 141414) to the cabinet doors and then to the main cabinet frame. Align the doors properly and secure them. Attach the door handles (e.g., 155675) to the doors using the provided screws (e.g., 10119600).
Step 6: Final Inspection
Carefully review all assembled parts and connections to ensure they are tight and secure. Check the stability of the cabinet and make any necessary adjustments to the doors or alignment for optimal function.
