SMÅSTAD

Safety Warning

⚠️ Children have died from furniture tipover. To reduce the risk of furniture tipover:

ALWAYS install anti-tip device provided.
NEVER put a TV on this product.
NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
NEVER open more than one drawer at a time.
Place heaviest items in the lowest drawers.

Read and follow each step of the instructions carefully.

Tools and Wall Mounting

Required tools:

Screwdriver (Phillips head)
Hammer
Tape measure
Drill
Drill bits: Ø 8 mm (5/16"), Ø 3 mm (1/8")

Wall mounting guidance:

The screw(s) and plug(s) supplied can be used with most solid (A) and hollow (B) walls. For solid wood (C) use the screw(s) without plug(s). If you are uncertain, seek professional advice.

Type A (Solid Walls): Drill Ø 8 mm (5/16") hole. Insert plug.
Type B (Hollow Walls): Drill Ø 8 mm (5/16") hole. Insert plug.
Type C (Solid Wood): Drill Ø 3 mm (1/8") hole. Use screw(s) without plug(s).

Refer to page 24 for detailed wall mounting diagrams.

Main Unit Assembly

Follow these steps to assemble the main SMÅSTAD unit.

Step 1: Prepare Base Panels

Two base panels are shown. A screw (part 130449) is inserted into one panel.

Step 2: Attach Side Panels

Side panels are being attached to the base. Arrows indicate the direction of assembly.

Step 3: Secure with Cam Locks

Cam locks (110837) and bolts (102533, 102509) are used to connect the panels. Incorrect usage of cam locks is indicated with a cross symbol (❌).

Step 4: Attach Top Panels

Top panels are secured using cam lock assemblies (130449).

Step 5: Connect Main Structure

Side panels are attached to the assembled base and top. Arrows indicate the direction.

Step 6: Reinforce Structure

Cam locks (102533) and bolts (110837) are used to reinforce the main structure. Incorrect usage is indicated with a cross symbol (❌).

Step 7: Insert Screw

A screw (130449) is inserted into the structure.

Step 8: Position Top Panel

A top panel is slid into place.

Step 9: Secure Top Panel

Cam locks (102509) are used to secure the top panel.

Step 10: Attach Top Screws

Screws (109546) are inserted into the top of the unit.

Step 11: Install Locking Mechanisms

Circular locking mechanisms (152642) are attached to the unit.

Step 12: Orient Unit and Add Dowels

The unit is shown being oriented upright. A screw (100001) and dowel (100215) are indicated for this step.

Step 13: Install Internal Shelves

Internal shelves are attached using cam locks (116637) and bolts (114929). A numbered list (1-11) is shown, likely for part identification or sequence.

Step 14: Insert Shelf

A shelf is inserted into the unit.

Step 15: Adjust Feet

The unit is shown being leveled or adjusted using adjustable feet (4x). Arrows indicate vertical movement.

Step 16: Secure Top Mechanism

A securing mechanism (2x) is attached to the top of the unit.

Step 17: Position Unit

The unit is shown being pushed against a wall.

Step 18: Wall Mounting Information

This step provides text information regarding wall mounting screws and plugs, along with URLs for further assistance: www.IKEA.com/secure-it and www.IKEA.cn/secure-it.

Step 19: Attach Wall Bracket

A wall bracket (114664) is attached to the unit and the wall using screws (147968, 126916). Measurements for bracket placement are shown.

Step 20: Install Drawer/Tray Mechanism

A drawer or tray mechanism (10005905) is attached. The word "Click!" indicates successful attachment.

Step 21: Attach Handle/Rail

A handle or rail (101351) is attached using screws.

Step 22: Attach Side Pieces

Side pieces are attached to a base using screws (100006, 100224).

Step 23: Secure Shelves

Shelves are inserted and secured with screws (100006, 100224).

Step 24: Secure Unit to Wall

The unit is secured to the wall using brackets (10055125) and screws (101083).

Step 25: Extend Changing Surface

A pull-out changing surface is shown being extended.

Step 26: Secure Changing Surface

The changing surface is secured using a mechanism (112571).

HJÄLPA Component Installation

These steps detail the installation of the HJÄLPA component.

Step 1: Attach HJÄLPA Part

The "HJÄLPA" part is attached using cam locks (159945, 152529). A numbered list (1-11) is shown, likely for part identification or sequence.

Step 2: Secure HJÄLPA Part

The "HJÄLPA" part is further secured with cam locks.

	BERGSHYTTAN Table Assembly Instructions \| IKEA Comprehensive guide to assembling the IKEA BERGSHYTTAN table. Includes parts identification, required tools, and step-by-step visual instructions with textual descriptions.
	VITTSKÄR Assembly Instructions Step-by-step assembly guide for the IKEA VITTSKÄR product, detailing how to put together the furniture using provided parts and tools. Includes part numbers and assembly actions.
	TROFAST Storage System Assembly Instructions - IKEA Detailed assembly guide for the IKEA TROFAST storage system. Learn how to safely build and install your TROFAST unit with step-by-step instructions and parts list.
	IKEA NORDLI Modular Chest of Drawers Assembly Instructions Comprehensive assembly guide for the IKEA NORDLI modular chest of drawers, featuring step-by-step instructions, safety warnings, and parts identification. Suitable for various NORDLI configurations.
	ÅLHULT Extendable Table Assembly Instructions - IKEA Detailed step-by-step assembly guide for the IKEA ÅLHULT extendable table, including a complete parts list and visual descriptions of each assembly stage.
	IKEA MALM Bedroom Series Buying Guide A comprehensive buying guide for the IKEA MALM bedroom series, detailing chests of drawers, beds, dressing tables, desks, and complementary products. Includes care instructions, safety warnings regarding tipping hazards, and detailed product specifications with article numbers and prices.
	IKEA KURA Bed Curtain Assembly Instructions Step-by-step guide for assembling the IKEA KURA Bed Curtain, including diagrams and instructions for attaching brackets and curtains to the KURA bed frame.
	IKEA SILVERGLANS LED Lighting - Safety and Installation Guide Discover the IKEA SILVERGLANS LED lighting. This guide provides essential safety instructions, assembly tips, and product information for your new lighting solution.