BÅTSKÄR Shelf Unit for Sink Assembly Instructions
Brand: IKEA
Before starting assembly, gather the necessary tools:
- Screwdrivers (various types) ?
- Spirit level ?
- Wrench ?
- Drill ⚙️
Diagrams show general guidance on handling parts correctly and avoiding incorrect methods.
One diagram shows a person on the phone with IKEA, indicating support is available.
- 1x Allen key (130445)
- 4x Feet (10099819)
- 2x Brackets (10108757)
- 46x Screws (10042206)
- 24x Screws (10102170)
- 4x Screws (115294)
- 4x Brackets (10099819)
- 4x Brackets (10123892)
- 3x Feet (10106858)
Connect two frame sections. Use four screws (part number 10099819) for this connection. A close-up view illustrates the correct screw placement.
Two people are shown attaching a large panel to the frame using screws (labeled L1 and R1). Close-up diagrams show correct attachment of brackets and wheels, and highlight incorrect methods.
Use the Allen key (130445) to secure components with eight screws (part number 10042206).
Slide a component into place and secure it with eight screws (part number 10042206). Close-up views show correct and incorrect bracket attachments.
Mark the countertop for sink placement. Measurements indicate 3 and 15/16 inches (10 cm) from the edges. Drill a hole with a diameter of 3/8 inch (10 mm). A diagram shows a hand securing the sink in place.
Place the faucet assembly into the countertop hole. A warning symbol ⚠️ indicates caution. The assembly is shown being placed into a waste bin with a recycling symbol ♻️.
Position the sink (BOHOLMEN) into the countertop. Secure it using four screws (part number 10123892).
Use the Allen key to tighten screws from underneath the countertop to firmly secure the sink.
Attach runners or guides using four screws (part number 115294). Diagrams show correct and incorrect orientations.
Two people lift and place the assembled countertop onto the base frame. Secure it using eight screws (part number 10042206).
The unit is shown fully assembled, including the sink (KALLSJÖN).
Connect the drain assembly and pipe. A measurement of 5/8 inch (15 mm) is indicated for a connection.
Insert and secure the drain pipe to the sink assembly.
Attach side or decorative panels using two screws (part number 10108757).
Secure a shelf or support component using two screws (part number 10042206).
Attach door hinges using three screws (part number 130445).
Attach the second door using two screws (part number 10042206). Close-up diagrams show correct and incorrect hinge attachment methods.
Adjust door alignment by tightening screws (part number 10042206). Close-up views illustrate correct and incorrect alignment adjustments.
Secure the base structure using eight screws (part number 10042206).
Attach door handles or other hardware using six screws (part number 10102170).
Attach the doors using three screws (part number 10106858).
Install the slatted shelf into the base. Use twenty-two screws for attachment. The diagram indicates a "Click!" sound upon proper installation.
