Mircom FX-2017-12NDS Network Fire Alarm Control Panel
Model: FX-2017-12NDS
Catalog Number: 5942
Description
Mircom's FleX-Net Series is a powerful intelligent networkable fire alarm solution designed with many levels of flexibility to meet virtually any application of detection, control, notification and emergency communications. Features such as fire detection & alarm, audio/voice evacuation, BACnet, Boolean logic, networking and graphical work stations allow this modular solution to accommodate the simplest systems up to the most complex solutions.
With the addition of the Advance Protocol (AP), Fire/CO detection and 520 Hz support on both the addressable loop and through the audio/voice evacuation, Mircom's FleX-Net is poised to take you even farther into the future with expanded capabilities.
Designed for peer-to-peer network communications, the FX-2017-12NDS allows for a maximum of 63 nodes, while providing reliability, flexibility and expandability.
Each base panel consists of one intelligent signaling line circuit (SLC) capable of supporting 159 analog Sensors and 159 addressable modules. In addition, the base panel includes Four Style Z/Y (Class A/B) Notification Appliance Circuits and an easy to read and use, large 4 x 20 back-lit alphanumeric LCD display.
The network configuration allows the FX-2017-12NDS control panel to be connected to a Mircom network to provide additional input circuits, visual zones, programmable notification appliance circuits, and relays. The network interface module allows the panels to communicate on a peer-to-peer network via a Proprietary Arcnet Network Communications protocol.
Note: This information is for marketing purposes only and not intended to describe the products technically. Not for installation purposes.
Features
Alarm Control
- 1 SLC loop expandable up to 29
- Each SLC Loop is capable of supporting 159 Analog Sensors and 159 Addressable Modules which can be wired in Style 6 or 7 (Class A) or Style 4 (Class B)
- Four Style Z/Y (Class A/B) Notification Appliance Circuits rated at 1.7 Amps each
- System has the ability to mix CLIP and AP devices on the same loop
- Large, easy to use and readable 4 by 20 character Back-lit LCD Display
- Correlatable Switch Inputs which allow for multi-functional outputs
- Four Status Queues for Alarm, Supervisory, Trouble and Monitor
- Auxiliary relay contacts for Common Alarm, Supervisory and Trouble
- Group bypass with built-in false alarm prevention technology
- RS-232 output for remote system printer or CRT
- Two event History Logs; one for Alarm-related events and one for all events.
- Supports 3 configuration files with "hot swap" support
- Conventional Hardwire Adder Module expandability
- Built-in Walk Test operation
- Canadian Two Stage operation
- Provision for three programmable modules
- Configurable for Coded Operation
- Intelligent Smoke Detector sensitivity levels
- 3D graphical monitoring and control using Mircom's Open Graphic Navigator™
- BACnet support
- Advanced (Boolean) logic functions
- Built-in Ethernet port
- Remote diagnostics via a built-in web server
- Audio/Voice Evacuation with 520Hz capability
- UL listed for Smoke Control
- HVAC Fan and Damper Control
Network Features
- Up to 63 nodes
- Peer-to-peer network communications
- Style 4 (Class B) or Style 6 or 7 (Class A) wiring configuration
- Proprietary Arcnet Network Communications protocol
- Supports copper and/or fiber optic network cable
Certifications include: UL, ULC, FM Approved, NYC Fire Dept. COA# 6064.
Components and Modules
FX-2017-12NDS Midsize Network Main Control Unit
The FX-2017-12NDS Midsize Network Main Control Unit comes complete with one intelligent Signaling Line Circuit (SLC) Style 4, 6 or 7, Four Style Z/Y (Class A/B) NAC Circuits (1.7 Amps each), a 4 line by 20 character back-lit LCD display, and a 12 Amp Power Supply. The FX-2017-12NDS provides space for the FNC-2000 Network Controller Module, up to 16 adder modules/loop controllers and 3 internal annunciator adder display modules. The FX-2017-12NDS mounts in the BBX-1072ADS enclosure.
Enclosures
BBX-1072ADS Enclosure
The BBX-1072ADS enclosure supports one FX-2017-12NDS and up to 40 AH Batteries. The enclosure features the universal CAT-30 lock and a removable door for easy installation and servicing. The enclosure is available in a beige or red exterior (BBX-1072ARDS).
Dimensions: 32 1/2"H x 25"W x 6 1/2"D
Controller Modules
FNC-2000 Fire Network Controller Module
The FNC-2000 provides network capability to the FX-2017-12NDS. One Fire Network Controller Module is required per network node panel. In addition, the FNC-2000 provides an interface for adding an optional FOM-2000-SP Fiber Optic Network Adder Module. The FNC-2000 mounts in the FX-2017-12NDS.
FOM-2000-SP Fiber Optic Network Adder Module
The FOM-2000-SP Fiber Optic Network Adder Module allows for the use of fiber optic cabling on the FX-2017-12NDS. It seamlessly connects to the interface on the FNC-2000 Fire Alarm Network Controller Module.
Adder Loop Controller Modules
ALCN-792MISO Isolated Quad Loop Controller Module
The ALCN-792MISO Isolated Quad Loop Controller Module provides two Signaling Line Circuits (SLC) to the FleX-Net system, consisting of 159 Analog Sensors and 159 Addressable Modules per loop. The ALCN-792MISO can be expanded with the use of the ALCN-792D Daughter Board Module. The ALCN-792MISO occupies one module slot.
ALCN-792D Daughter Board for Isolated Quad Loop Controller Module
The ALCN-792D Daughter Board provides an additional two SLC loops when connected to the ALCN-792MISO Isolated Quad Loop Controller Module. The daughter board mounts on top of the ALCN-792MISO.
Adder Hardwire Modules
DM-1008A Eight Initiating Circuit Module
The DM-1008A provides 8 Style B (Class B) or 4 Style D (Class A) Initiating Circuits configurable for Alarm, Supervisory or Trouble zones. The DM-1008A occupies one module slot in the FX-2017-12NDS.
SGM-1004S Four Notification Appliance Circuit Output Module with Built-in Synchronization
The SGM-1004S provides up to four indicating circuits each rated at regulated 24 VDC/FWR 1.7 Amps (5 Amps maximum per SGM-1004S) to signal devices such as strobes, bells, horns, etc. For special applications, it is rated at 33 VDC/FWR 2.1 Amps (5 Amps maximum per SGM-1004S). Each of the indicating circuits can be configured as non-silenceable (steady) or silenceable. SGM-1004S enables the compatible fire alarm control panels to have synchronized NAC circuits.
RM-1008A Eight Relay Circuit Module
The RM-1008A provides the FX-2017-12NDS with eight individual configurable relays per module. Each relay provides one Form C contact rated at 28 VDC @1 Amp (resistive load) as well as a Green LED to indicate that the relay is active. The RM-1008A occupies one module slot in the FX-2017-12NDS.
Adder Auxiliary Modules
UDACT-300A Digital Alarm Communicator Module
The UDACT-300A Digital Alarm Communicator Module allows the FX-2017-12NDS to transmit addressable point information to a central station. The UDACT-300A occupies one module slot in the FX-2017-12NDS.
PR-300 Polarity Reversal/City Tie Module
The PR-300 Polarity Reversal/City Tie Module provides the system with a supervised City Tie (24 VDC/200 mA max.) and Polarity Reversal connection (24 VDC (open circuit), 8 mA max. (shorted)). The PR-300 occupies one module slot in the FX-2017-12NDS.
Programmable Modules
FDX-008W Fan Damper Control Module
The FDX-008W Fan Damper Control Module provides individually programmed circuits which can be used for fan or damper control. The FDX-008W connects to the main panel or the RAXN-LCD and occupies one display position in the BB-1000 or BB-5000 Series enclosures.
IPS-2424DS/IPS-4848DS Programmable Input Switches Module
The IPS-2424DS/IPS-4848DS provides 24/48 programmable switches that can be configured for ancillary functions such as zone bypass or added common control functions. The IPS-2424DS/IPS-4848DS connects to the main panel or the RAXN-LCD when mounted remotely. The IPS-2424DS/IPS-4848DS occupies one display position in the BB-1000 or BB-5000 Series enclosures.
Remote Annunciators
RAXN-LCD Remote LCD Annunciator
The RAXN-LCD Remote LCD Annunciator provides the same functions as the main display on the fire alarm control panel. The RAXN-LCD occupies one display position in the BB-1000 or BB-5000 Series enclosures.
RAM-1032TZDS Main Remote LED Annunciator
The RAM-1032TZDS Main Remote LED Annunciator provides common annunciator functions and 32 points of LED annunciation. The RAM-1032TZDS has indicators for A.C. On, Common Trouble and Signal Silence and controls for System Reset, Lamp Test, Fire Drill, Buzzer Silence and Signal Silence. The RAM-1032TZDS occupies one display position in the BB-1000 or BB-5000 enclosures.
RAX-1048TZDS Programmable LED Annunciator Module
The RAX-1048TZDS Programmable LED Annunciator Module provides 48 programmable bi-colored LEDs. The RAX-1048TZDS connects to the main panel or either the RAXN-LCD or RAM-1032TZDS when mounted remotely. The RAX-1048TZDS occupies one display position in the BB-1000 or BB-5000 Series enclosures.
Graphic Annunciator Driver Modules
MGD-32 Master Graphic Driver Module
The MGD-32 Master Graphic Driver Module provides common control inputs for the common control switches such as System Reset, Signal Silence, Auxiliary Disconnect, Fire Drill, Lamp Test, Acknowledge and General Alarm. The MGD-32 can also drive up to 32 supervised outputs. These output points are capable of driving LEDs or incandescent lamps. The MGD-32 mounts in a graphic annunciator wallbox or in the BB-5000 enclosures. An external power supply is required for incandescent lamps and lamp test.
AGD-048 Adder Graphic Driver Module
The AGD-048 Adder Graphic Driver Module can be used with the MGD-32 to support an additional 48 supervised outputs. The AGD-048 mounts in a graphic annunciator wallbox or in the BB-5000 enclosures.
Graphics Software
Open Graphic Navigator (OpenGN)
Open Graphic Navigator (OpenGN) is a centralized fire alarm management system that provides building or campus monitoring. As a powerful integration tool, OpenGN allows operators to monitor remote sites from multiple workstations or smart phones located anywhere in the world. OpenGN displays monitored buildings and campuses in both 2D and 3D representations, and is highly customizable.
Dimensions for Annunciator Module Enclosures
| Model | Dimensions |
|---|---|
| BB-1001D/DR/DB/DS | 9"H x 12.75"W x 1.85"D |
| BB-1002D/DR/DB/DS | 18"H x 12.75"W x 1.85"D |
| BB-1003D/DR/DB/DS | 26.4"H x 12.75"W x 1.85"D |
| BB-1008D/DR/DB | 33"H x 22.5"W x 1.85"D |
| BB-1012D/DR/DB | 45"H x 22.5"W x 1.85"D |
Typical Networked System Configuration
The typical system configuration illustrates a network of up to five nodes. Node 1, 3, and 4 are Mircom FX-2017-12NDS panels housed in BBX-1072ARDS enclosures. Node 2 is a Mircom FX-2003-12NDS panel in a UB-1024DS backbox. Node 5 is also a Mircom FX-2003-12NDS panel in a UB-1024DS backbox. These nodes are interconnected via RS-485 communication links, with some nodes also featuring Ethernet connectivity for integration with OpenGN Graphics Software. Remote LCD annunciators (RAXN-LCD) and programmable LED annunciators (RAX-1048TZDS) are shown connected to the network. The diagram also indicates wiring configurations such as Class 'A' (Style 7) and Class 'B' (Style 4).
Electrical Specifications
| Primary Input Power | 120V 60Hz / 240V, 50Hz |
| Power Supply Ratings | 4 Amps / 2 Amp (primary) 12 Amps. max. (secondary) |
| For NAC Circuits | 24VDC unfiltered, 10 Amps. max. Max. Voltage Drop Permitted (Class A = 3.3V, and Class B = 3.7V) |
| Battery Type | 24VDC, Gel-Cell/Sealed Lead-Acid |
| Battery Charging Capability | 17-65 AH batteries |
Current Consumption
| Model Number | Description | Standby | Alarm |
|---|---|---|---|
| FX-2017-12NDS | Network Main Control Unit (12 Amp) | 0.310 | 0.733 |
| ALCN-792MISO | Isolated Dual Analog Loops | 0.130 | 0.145 |
| ALCN-792MISO/D | Isolated Quad Analog Loops | 0.130 | 0.145 |
| FNC-2000 | Fire Network Controller Module | 0.190 | 0.0190 |
| FOM-2000-SP | Fiber Optics Module | 0.015 | 0.015 |
| DM-1008A | 8 Initiating Circuit Module | 0.080 | 1 zone active: 0.125 2 zone active: 0.170 4 zone active: 0.275 6 zone active: 0.370 8 zone active: 0.465 |
| SGM-1004S | 4 Notification Appliance Circuit Module | 0.031 | 0.096 |
| RM-1008A | 8 Relay Circuit Module | 0.025 | 0.150 |
| FDX-008W | Fan Damper Control Module | 0.015 | 0.035 |
| UDACT-300A | Dialer Module | 0.045 | 0.120 |
| PR-300 | City Tie Module | 0.035 | 0.300 |
| RAX-1048TZDS | Adder Annunciator Chassis | 0.022 | 1 zone active: 0.026 2 zone active: 0.030 3 zone active: 0.035 4 zone active: 0.039 48 zone active: 0.262 |
| RAM-1032TZDS | Adder Annunciator Chassis | 0.050 | 32 zone active: 0.300 |
| MGD-32 | Main Graphic Driver Module | 0.035 | 1.6 |
| AGD-048 | Adder Graphic Driver Module | 0.035 | # of LEDs x 4mA |
| IPS-2424DS | Programmable Input Switches Module | 0.010 | 0.015 |
| IPS-4848DS | Programmable Input Switches Module | 0.010 | 0.022 |
Ordering Information
| Model | Description |
|---|---|
| Network Fire Alarm Control Panel | |
| FX-2017-12NDS | Network Main Control Unit with 12 Amp power supply. Mounts in the BBX-1072ADS/BBX-1072ARDS enclosure. |
| BBX-1072ADS | Black backbox enclosure for FX-2017-12NDS c/w beige door. |
| BBX-1072ARDS | Black backbox enclosure for FX-2017-12NDS c/w red door. |
| Network Controller Modules | |
| FNC-2000 | Fire Network Controller Module |
| FOM-2000-SP | Fiber Optic Network Adder Module |
| Adder Loop Controller Modules | |
| ALCN-792MISO | Network Isolated Quad Loop Controller Module |
| ALCN-792D | Daughter board for ALC-792M Quad Loop Controller Module |
| Adder Hardwire Modules | |
| DM-1008A | Eight Class B (Style B) or 4 Class A (Style D) Initiating Circuit Module |
| SGM-1004S | Four Class A/B (Style Z/Y) Notification Appliance Circuit Module (Rated at 1.7 Amps per circuit) |
| RM-1008A | Eight Relay Circuit Module c/w eight form C relays (Rated for 28 VDC @ 1 Amp max. per relay) |
| Adder Auxiliary Modules | |
| UDACT-300A | Digital Alarm Communicator Transmitter/Dialer Module |
| PR-300 | Polarity Reversal and City Tie Module |
| Remote Annunciators | |
| RAXN-LCD | Remote LCD Annunciator |
| RAM-1032TZDS | Main Remote LED Annunciator c/w 32 Bi-Colored LEDs |
| RAX-1048TZDS | Programmable LED Annunciator Module c/w 48 Bi-Coloured LEDs and 48 Trouble LEDs |
| Programmable Modules | |
| IPS-2424DS | Programmable Input Switches Module c/w 24 selector switches and 24 bi-coloured LEDs |
| IPS-4848DS | Programmable Input Switches Module c/w 48 selector switches and 48 bi-coloured LEDs |
| FDX-008W | Fan Damper Control Module |
| Enclosures for Remote Annunciators / Programmable Modules | |
| BB-1001D | Remote Enclosure. Houses one module. Add suffix "R" for red, "S" for stainless steel, and "B" for black door. |
| BB-1002D | Remote Enclosure. Houses two modules. Add suffix "R" for red, "S" for stainless steel, and "B" for black door. |
| BB-1003D | Remote Enclosure. Houses three modules. Add suffix "R" for red, "S" for stainless steel, and "B" for black door. |
| BB-1008D | Remote Enclosure. Houses eight modules. Add suffix "R" for red and "B" for black door. |
| BB-1012D | Remote Enclosure. Houses twelve modules. Add suffix "R" for red and "B" for black door. |
| Graphic Driver Modules | |
| MGD-32 | Main Graphic Driver Module c/w 32 Supervised Outputs |
| AGD-048 | Adder Graphic Driver Module c/w 48 Supervised Outputs |
| Graphics Software | |
| OGN-FLSLIC-ONE | Single Fire Alarm Control Panel License (Price per connection) Requires: OGN-KEY (sold seperately) Contact us for non-Mircom panel connections |
| OGN-FLSLIC-EXP | Fire Alarm Control Panel License for 2-9 Connections (Price per connection) Requires: OGN-KEY(sold seperately) Contact us for non-Mircom panel connections |
| OGN-FLSLIC-STD | Fire Alarm Control Panel License for 10-99 Connections (Price per connection) Requires: OGN-KEY (sold seperately) Contact us for non-Mircom panel connections |
| OGN-FLSLIC-ENT | Fire Alarm Control Panel License for 100+ Connections (Price per connection) Requires: OGN-KEY (sold seperately) Contact us for non-Mircom panel connections |
| Accessories | |
| OGN-KEY | OGN License Key Stick |
| UIMA4 | Interface for Configuring MGC Fire Panels |
| MGC-CONFIG-KIT4 | Fire Panel Configuration KIT with UIMA4. |
Contact Information
Canada
25 Interchange Way Vaughan, ON L4K 5W3
Telephone: (905) 660-4655 | Fax: (905) 660-4113
U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305
Toll Free: (888) 660-4655 | Fax Toll Free: (888) 660-4113
Website: www.mircom.com
