Product Overview
The eufy T8134121 Security SoloCam S220 is an outdoor 2K HD security camera. The product overview details its various components:
A diagram illustrates the camera's design. From the front, it shows the camera lens, a photosensitive sensor, a microphone, and an LED indicator. The back view displays a SYNC button, a USB-C charging port, and a mounting hole. The top view highlights the integrated solar panel.
| Label | Component |
|---|---|
| 1 | Solar Panel |
| 2 | Photosensitive Sensor |
| 3 | Microphone |
| 4 | Camera Lens |
| 5 | LED Indicator |
| 6 | Motion Sensor |
| 7 | Speaker |
| 8 | SYNC Button |
| 9 | USB-C Charging Port |
| 10 | Mounting Hole |
Charging Solocam
The LED indicator on the camera provides charging status:
- Solid Blue: Charging
- Off: Fully Charged
An illustration shows the camera connected to a power source via its USB-C port for charging.
Setting Up Solocam
Download the App and Set Up the Device
To set up your SoloCam, follow these steps:
- Download and install the eufy Security app on your smartphone or tablet.
- Sign up for a new account or log in if you already have one.
- Follow the on-screen instructions within the app to add your SoloCam to your account.
Mounting Solocam
Select a Location
The S220 SoloCam can be mounted on a wall. Choose a location that provides the desired viewing angle. For optimal performance, it is recommended to mount the camera 7-10 ft (2-3 m) above ground level. To maximize the solar panel's efficiency, select a spot that receives ample sunlight throughout the day.
A diagram illustrates the recommended mounting height and the camera's field of view and motion detection zone.
Mount S220 SoloCam
The S220 SoloCam is suitable for mounting both indoors and outdoors.
- Loosen the mount cover by turning it counterclockwise and disassemble the mount.
- For hard surfaces (e.g., brick, concrete): Drill holes using a 15/64 in (6 mm) drill bit and insert the provided anchors. Skip this step for soft surfaces like wood.
- Firmly screw the base of the mount onto the wall. Reassemble the mount.
- Screw the SoloCam onto the mount. Ensure the solar panel is facing upwards towards the sky. Position the camera to achieve the desired view, using the live stream in the eufy Security app to guide placement.
Illustrations show the step-by-step process of disassembling the mount, drilling into a wall, inserting anchors, attaching the mount base, and finally securing the camera.
Safety
The recommended operating temperature range for the device and accessories is -20°C to 50°C (-4°F to 122°F). Do not use the device in environments that exceed these temperatures unless specifically indicated as safe in the manual. Avoid exposing the device to direct sunshine or excessively wet conditions. For optimal performance, it is recommended to operate the device in an environment with temperatures between 5°C and 25°C, ensuring normal room temperature and good ventilation.
CAUTION!
There is a risk of explosion if an incorrect battery type is used. Dispose of used batteries according to their instructions.
ATTENTION!
IL EXISTE UN RISQUE D'EXPLOSION EN CAS D'UTILISATION D'UN TYPE DE PILE INCORRECT. ÉLIMINEZ LES PILES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS.
Warning:
- Replacing the battery with an incorrect type may bypass safeguards and create danger.
- Disposing of a battery in fire, or exposing it to significant heat, crushing, or cutting, may result in an explosion and leakage of flammable liquids and gases.
- Leaving a battery in an extremely hot environment may result in an explosion and leakage of flammable liquids and gases.
- A battery subjected to extremely low air pressure may result in an explosion and leakage of flammable liquids and gases.
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The minimum separation distance is 20 cm.
Notice: Shielded Cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party:
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.
IC RF Statement
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
Declaration of Conformity
This product complies with the radio interference requirements of the European Community.
Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: https://uk.eufylife.com/.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max Output Power: 19.65 dBm.
The following importer is the responsible party (contact for EU matters only):
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany
This product complies with the radio interference requirements of the United Kingdom.
Hereby, Anker Innovations Limited declares that this product is in compliance with Radio Equipment Regulations 2017(SI2017/1206). The full text of the UK declaration of conformity is available at the following internet address: https://uk.eufylife.com/.
Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
Recycling
Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused.
The symbol ♻️ means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment.
For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
Customer Service
The product comes with a 12-month limited warranty.
US Contact: +1 (800) 988-7973
UK Contact: +44 (0) 1604 936200
Email: support@eufylife.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Follow us:
- Facebook: @EufyOfficial
- Twitter: @EufyOfficial
- Instagram: @EufyOfficial
Documents / Resources
You can find the official User Guide for the eufy T8134121 Security SoloCam S220 Outdoor 2K HD Security Camera at the following link:
[pdf] User Guide
Keywords associated with this product include: T8134121, T8134121 Security SoloCam S220 Outdoor 2K HD Security Camera, Security SoloCam S220 Outdoor 2K HD Security Camera, S220 Outdoor 2K HD Security Camera, 2K HD Security Camera, Security Camera, Camera.
eufy - Built with Care | Home Security System & Robovacs | eufy UK
